Reviews
Good product.
This single pole locks the Porch columns and two Motorcycles together.
One end has a Ring and another Ring is attached, so the length of the Chain can be used effectively.
The Chain itself is of standard construction, but I would recommend it because of its length for the price, which, together with the aforementioned points, makes it easy to handle and to use the so-called "earth lock".
I have no complaints about the Pad lock that comes with it in terms of functionality, but the Body is Material:Plastic and cheap looking and may be somewhat less secure. (I use another lock that I have on hand.)
View detail
Price is high, but texture is satisfactory
I chose this one because it is OEMOption. The capacity is larger than I expected, and I feel that a man can go for one night and two days with enough room to spare. The price is quite high, but when I tried it, I was satisfied with the quality and finish of the Large bag. However, there are no carrying straps or handles, so you need to attach them separately. It would have been better if they had attached a handle, but overall, I am satisfied. View detail
I don't know. Self-satisfied.
The Throttle Wire was right above the Brake Lever Screw, unlike the Instruction Manual, so it was difficult to remove the Throttle Wire, which was Large and strange.
If not, installation is easy.
The quality is high, and the adjustable lever is nice, but it might be better if it wasn't so expensive.
The price is quite expensive.
View detail
Nice try!
I chose SizeS.
At first I had a pain in my forehead area, but now I don't want to get used to it.
The design and functionality (ventilation and buckle) are also very good considering the price, but there is one drawback.
The inside of Shield is easily damaged.
Just wash and wipe off the dirt and it will be a little scuffed up.
Why ????? when the outside is fine?
That's too bad!
View detail
Fits: YAMAHA tricity, YAMAHA Tricity 155, YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity 155
It's pretty good!
In my previous motorcycles, when I opened the seat, the handlebar interfered with the seat and tore the seat, so I bought this to reinforce the seat in advance. I was a little worried because of all the comments I had heard about the seat, but when I tried it on, I was able to install it without too much trouble. I like the YAMAHA ?Logo on it, it's fashionable. View detail
Using Zenith:・・・・
Was the one you received as per Image?
It was exactly as shown in the Image and was well made.
I am not a cheap or bad person.
[How did you feel about the Fit?
I chose SizeFree, but it's not too large.
It can be used normally, it's just that it's only for city driving, PetitTwo should be considered as the way forward.
How was your experience with it?
The feel is good, it is light and the basic performance is TIGHTLY.
What are the specifications of the product?
Smoke Shield (sold separately) is used.
There are no other special functions, and it is Simple.
[Was there anything that disappointed you?
Nothing in particular. Frankly, I feel better because I had no expectations at all.
How did it compare to other products?
No comparison.
It was purchased for 125?, so it was a cosmetic choice.
Since my Motorcycle is a Yamaha, I inevitably chose a Yamaha product.
I think the performance is sufficient for my needs, although the Fit feeling etc. is not bad,
Overall, it is loose, so it is not suitable for long distances. It is considered to be only for short distances.
I think it is necessary and sufficient.
View detail
Excellent DoubleGuard in all areas.
Was the one you received as per Image?
The color and shape are as shown in the Image, but it felt surprisingly thin.
It is a Y's Gear product, but there is no noticeable Logo, so I personally rate that highly as well.
I don't like the ones with the large manufacturer logo on the back.
[How did you feel about the Fit?
I am 181cm tall and weigh just under 70km and purchased a 3L, which is slightly roomy over my regular clothes.
Rain pants can be worn with Over Pants underneath.
It is very helpful in the winter because I like to layer my clothes.
In addition, the hems are slightly longer, so they will not slip up in the riding position and get wet inside.
How was your experience with it?
Used the day after purchase as it rained immediately (slightly light rain).
It is a 30km one way commute and was very comfortable with no flooding like the previous Rain Wear.
I commute by motorcycle even in heavy rain, so I have high expectations for the water resistance in that area.
I chose the color Orange, and it has good visibility and looks good even in dimly lit rainy weather.
The rest of the DoubleGuard in various locations is excellent.
SleeveDoubleGuard, in particular, shuts out water from Gloves.
No unpleasant wetting.
WaistDoubleGuard is good because it has a good fit around the stomach and prevents flooding.
Now it's just a matter of how many years they will work hard....
[Was there anything that disappointed you?
Nothing in particular so far.
How did it compare to other products?
I have been using Rain Wear made in Thailand all this time.
After about a year and a half, the crotch area became heavily flooded and I was quite disappointed and purchased this product.
I was introduced to this product by a friend who has purchased Repeat many times, and I expect it to be durable.
View detail
Quality that only an OEM can provide
Since we put a cover on the body of the car, there were many times when the Mirror got caught on the cover and tore the cover...
It was difficult to cover the Cover with the protruding Mirror.
However, it is troublesome to remove Mirror each time. 。
OEM Flexible Bracket was purchased.
I used to use another company's product and liked it because of the range of motion, but the vibration ruined it quickly in the past.
I was skeptical, but I thought OEM would be large and sturdy, and the bracket was thick and looked sturdy, so I bought the YAMAHAOEM one. 。
Flexible Bracket
Flexible Bracket is not the type that can be folded down after installation, but the type that can be rotated back and forth freely. 。
YAMAHAOEM, Y's Gear's Flexible Bracket is
There are 3 types.
A Type H:115mm×W:100mm
B Type H:100mm×W:85mm
C Type H:75mm×W:65mm
I chose C Type because I want to show Refreshing around Handlebar.
However, if the vehicle has a screen such as SS or Scooter, the bracket may interfere with the screen, and it is not suitable for vehicles such as Separate Handlebars where the vibration of the vehicle body comes directly to the bracket.
after replacement
[Good point]
◎Mirror can be rotated and folded, making it easier to cover.
It can be neatly stored in→Cover.
◎Even when parking SPACE is narrow, it is possible to narrow the width of the car as much as possible.
◎Bracket is thicker and more rigid, making it resistant to vibration and less prone to Mirror shake. ◎Bracket is thicker and more rigid, so it is resistant to vibration and does not feel the shaking of Mirror.
◎Of course, Japanese Vehicle Inspection Correspondence.
[Bad point]
◎Maybe it is the way the Bracket is made, but the Mirror is more inward-looking, so visibility is reduced. ◎Bracket construction or Mirror is more inward, so visibility will be reduced.
◎Installation and adjustment can be time-consuming due to the many moving parts (laughs).
◎They are resistant to vibration, but because of the wide range of motion, the angles will Gap slightly if left unattended. →SmallAdjust frequently.
There are good parts and bad parts.
There is no problem at all for car inspection. 。
It would be better to use it with your own fine-tuning.
There are similar products even if they are not OEM. The point to pay attention to is the thickness of the base of the bracket. The thicker the bracket, the longer it will last.
View detail
To my friend's Motorcycle.
Ordered for installation on a friend's Motorcycle.
The installation went without any problems.
I was thinking that the tools would be a Drill and a Hole saw.
Hole saws are expensive to buy new, so if you don't have one, you should ask a Motorcycle shop for one.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
For moped
I purchased this for my parent's moped JOG.
Size:It has two ventilation holes, which is good for ventilation during the summer season. The removable interior is also in beige and looks stylish. It is made by Yamaha and has none of the cheapness of the half helmet sold at home centers.
The only problem was that the Buckle that holds the chinstrap was thin and very difficult to fit.
View detail
Yamaha/DEVIL SolidBlousonJacket
I have a heavy-duty adventure-type jacket with inner detachable inner for severe winter, but I was looking for a casual jacket to wear when touring serow. It is different from KUSHITANI's Original Jacket and has a red line as an insert color. (Final edition・Red) I chose this one because the MATCHING with the "M" looked better. As for the thermal performance, I ran for 2 hours in a row in the city in sunny weather with temperatures below 10℃, and I had no problem in my opinion. The only thing is that the shoulder and elbow pads are stiffer than I expected. (This is a comparison with Goldwin) It feels like a flat board and the fit is not good. It may get better with repeated wear, but if it does not get better after one season of wear, I would like to replace it. The sewing, the texture of the fabric, and the zipper are all KUSHITANIQuality, and they satisfy my desire to own a KUSHITANIQuality. View detail
Genuine Yamaha Tank Pad for MT10
This was something I had been meaning to buy but never got around to it. My mistake as I ended up with a small scratch from my jacket on the tank. Rather than get a respray, I just thought it best for now to get a new tank pad which will cover the scratch and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on teh genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Useful Items
I bought this because I had trouble avoiding documents every time I needed to store my helmet because of the size limit. It is an official Y's Gear product, so the fit and quality are perfect. If you are on Glyphus, you should buy it anyway! If you are on Glyphus, just buy it! View detail
The accuracy of the OEM Product and the atmosphere of the Parts themselves are good!
Compared to other brand products made in China, this is an OEM product, so the accuracy is number one! If a small rock hits the surface, it will not prevent damage to the light surface because the gap is too large. And the price may be high. Still, it is self-satisfaction to put OEM on the product. View detail
Fits: YAMAHA FZ6-S Feather, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6-N, YAMAHA FZ1, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Reliable OEM
The XSR900 is the first DIY replacement.
There were cheaper filters available, but we went with OEM for reliability...
Well, I guess it's a matter of mood (chuckles).
View detail
Purchased for touring purposes
I know what it's like to sit down and feel somewhat different.
Expect to see how the rest changes after long hours of driving.
If it makes it less of a pain in the butt, great.
View detail
Fits: YAMAHA FZ6-S Feather, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6-N, YAMAHA FZ1, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Used for YamahaBOLT Shoulder Bag.
I have been replacing Oil with YamahaBOLT Shoulder Bag around 3000Km of running,
The oil filter is changed at the same time every two cycles.
In that case, Filter uses this YamahaOEM product.
If you choose by price, ThirdParty products are more attractive.
OEM is the only choice in terms of buying peace of mind.
I have used Other Brand Products in the past and had a very hard time removing them.
Since then, we always choose OEM Products.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
It looks natural, like it was already there.
I had it installed when I took delivery of my car, so I don't know how to install it, etc.
I wasn't going to put Protector on, but it was cool, so I had it put on.
It's surprisingly overhanging, so it will protect you in case of an emergency.
I have yet to experience the effects of the product, but I think it is both visually appealing and practical.
It is just too expensive. You should negotiate with the store to put it on at the time of delivery.
View detail
OEM Product when in doubt
I ran it for a little bit, but it has a moderate grippy feel, so I feel it's for street use.
Isn't it big? I thought for a moment, "It's too big," but I didn't care. It was too expensive, even for an OEM product.
How durable is it?
View detail