Reviews
Price is high, but texture is satisfactory
I chose this one because it is OEMOption. The capacity is larger than I expected, and I feel that a man can go for one night and two days with enough room to spare. The price is quite high, but when I tried it, I was satisfied with the quality and finish of the Large bag. However, there are no carrying straps or handles, so you need to attach them separately. It would have been better if they had attached a handle, but overall, I am satisfied. View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Installation is very easy, but curing is required.
I installed it on a YZF-R7 and there are no problems.
The rear seat is small, so it is a little difficult to fix the seat bag.
I appreciate this kind of OEM side bag development.
With Universal's Side bag, you need to fix the belt back and forth.
In the case of this product, it is very easy to insert the Bracket into the Pocket and connect it to the Buckle.
It is also a good Point that is taken into consideration so that the excess Belt can also be rolled.
It would be a good or bad thing that the Bag itself only has an opening at the top.
I don't mind, but if you put a lot of small things in there, you may have a hard time taking them out.
In addition, when installing the device, it is necessary to pay attention to the speed limit and balance.
Curing is essential as it interferes with Cowl with gusto.
It is an exclusive product, but I would appreciate a lower price.
Bracket and Quantity:40,000 yen for a set is quite...
View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
Fits: YAMAHA TRACER900, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
Side case is required
It was installed at the same time when the car was delivered.
Since it is OEM, we have no complaints about Fitting and Key.
However, the drawback is that the capacity is small and expensive.
I was told that it could not be used in conjunction with Top case, but as long as I don't drive too hard, I have no problem so far.
I installed the Reflector on the side by myself, for safety.
Some people have put an iron box on their Racer, but I think that an iron box on this motorcycle would be a little too heavy (heavy weight).
(This does not mean that the OEM is not a good fit) and OEM. If you have a full Pannier + SeatBack, you can get a Large in time.
The Side case is basically left on, the Top case is basically removed, and the Ron Two case is put on.
I also thought about purchasing an inner bag, but I am still considering that one.
It is not an OEM, but is an Other Brand Product.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Required for luggage loading
This product is a plate for installing OEMTop case.
You will need a separate Rear Carrier Base.Top case has not been purchased yet, but I am installing a Krieger US20. There is a way to use the Tandem part of the Seat, but I personally don't like it and wanted to be able to do the Tandem as well, which is why I bought it.
The OEM is textured and the build quality is solid and secure. However, I think the price is high; it is nice that it can be separated from the Rear Carrier Base, but I would like to see the price a little lower.
View detail
That's a ManufacturerOEM Product!
The Seat bag was installed because without it, the Seat bag would not be long enough and the posture would be too tight.
This gives more room on the seat surface and stabilizes posture.
It also has a composite tube and functions as a grab bar for Tandem even if nothing is placed on it.
However, it is a bit pricey, and a separate TrunkMount base is required to attach the Top case.
It is not very cost-effective because it is necessary.
View detail
I thought it would be a bit larger...
The box it arrived in was also large, so I thought it would be small. I have not purchased the bag, but I wonder if the bag is also a little small. I have not purchased the bag, but I think the bag might be a little smaller than the bag. View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
That's the OEM Parts!
I wanted Side Back and decided to go with YamahaOEMParts.
There are less expensive ones, but I chose this one because of its design and fit.
As expected of OEM parts, the installation is also very exacting.
However, there is a sense of hanging on.
It is different from the hard case's clingy fixation.
I usually remove it, so I like that it can be easily detached.
It is convenient to have storage space.
View detail
It's a very expensive bag........
I was surprised when I saw the price.
It is that expensive.
But is it actually an OEM of SW-Motech, or is it very well made?
Fitting with the Carrier is excellent and the stability of the luggage is great.
The capacity is just right for a change of clothes and souvenirs for an overnight touring trip, and I would use TA-Q-BIN if I have more luggage.
It is Exactly for the SportsHeritage design of the XSR900.
However, it is quite expensive, so think carefully before purchasing.
View detail
A little expensive, but...
Both SidesQuantity:I thought it was a Set, but the price was only for One Side...
It's a little expensive, but... it's very expensive, but it's not something that is distributed in such large numbers.
Installation is as expected of an OEM, and of course, no modifications are required.
The same color as the frame? So it is not noticeable even if the side bag is not attached.
Costa? But the sense of security is excellent.
Probably made by SW-Motech, so SLC standard Bag can be used.
ABSBag can probably be used as long as it is SLC standard.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Convenient anyway.
I wanted to go full Pannier and bought it anyway.
Easy to use, no wobbleetc. and high quality.
OGKCUBT Aero Blade5 and SHOEI X-14 with Income attached.:2pc. Set storage was possible.
At any rate, Large is convenient because you can put in bonbons of luggage.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Mounted on YZF-R6
I saw the Side BackBracket for YZF-R7 on the market and bought it together with the bag to increase the load capacity since it looked like it could be installed on the R6 in terms of design.
https://www.webike.net/sd/24981150/
The problem of loading for practice sessions etc. was solved because it was successfully installed.
CONCLUSIONS:
- Spacer can be installed. Bracket can be attached by removing the Spacer.
- Slightly hits the blinker, so adjustment is necessary when the bag is attached.
- Helmet holders can coexist depending on the item.
The design of the Cowl is slightly different, or it is necessary to put a Spacer between the Body and Bracket.
This time K-CON Aluminum spacer collar (φ8.2/20×5) To Quantity:Pair (for Left and Right) In Quantity:1 Set of 4pcs. used.
https://www.webike.net/sd/1343095 /
AGRAS Helmet holder( https://www.webike.net/sd/23562969/), but coexistence can be achieved in a manner of speaking if an additional Spacer is bitten.
Additional. (φ8.2/20×10) If you add the two collars of "Limit", the Bag and Blinker, Helmet holder and BagBracket will interfere a little, but Limit can be installed.
Adjust to your liking, but note that adding color will shift the bag position downward and interfere more tightly with the blinker.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Mounted on MT-07
I had it installed on my MT-07. The quality and capacity are perfect. It can be installed SMARTly because it is an Exclusive Design of the car model. The price is higher than other manufacturers, but you can feel the peace of mind that only an OEM product can provide. View detail
Although it is not the original use of …
I bought this to attach my Large TouringBack. I was hoping the Grab Bar would work in conjunction with it, and it does! It looks cool and is exactly what I expected. I'm not planning on adding a Box at this point. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA Tricity155, YAMAHA YZF-R3, YAMAHA BirdCity, YAMAHA YZF-R25, YAMAHA TRACER GT, YAMAHA TRACER900, YAMAHA NIKEN, YAMAHA MT-10, YAMAHA MT-07, YAMAHA NIKEN GT, YAMAHA MT-09, YAMAHA MT-03, YAMAHA XMAX
Applicable Large Size
EUROYamaha's top case is 50L, but if you have a side case, 39L will be enough, and I think this will be more convenient for daily use.
It's also convenient to carry around because it has a handle.
It may depend on the type of car, but if you put a lot of luggage in it, it will become heavier and the center of gravity will change and the behavior of the motorcycle will change.
The only drawback is that it requires a special mounting plate.
It would be great if it had universal Plate support like GIVI, but...
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Some car models may require a large installation.
I bought a used box on Yahoo! I bought the box used on Yahoo!
The plate itself is only fastened with three bolts, but the front part of the Tracer 9 requires the removal of various covers, and since this is the first time to remove these parts, it took almost three hours from the start to the completion of the work through trial and error.
In addition, while I was removing the covers, some of the rivets that stop the covers went missing......
It's my pong hang's fault though (Lol)
When I put it on the box, it's still good! Side case and Quantity:With the Set, the Tourer style has come out very well.
View detail
Relief
I think that the common attachment is the one piece ScrewBracket type MaterialAluminum is common, but the one made by Y's Gear is Material:The screw brackets are not aluminum and the material strength seems to be good. I might think so. View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900
It won't look like a Bikes Peak, but it will be useful for travel.
The design is sporty, but you don't wear a side bag in BikeSpeak competition. The design is sporty, but I wouldn't wear a side bag on a BikeSpeak competition bike, but the thing is very good. View detail
A must-have for Side Back Mounting
A must-have for both OEM and other Other Brand products to have a side back, and since it's an OEM support, it's easy and stylish to install and will work with almost any side back. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA Tricity155, YAMAHA YZF-R3, YAMAHA BirdCity, YAMAHA YZF-R25, YAMAHA TRACER GT, YAMAHA TRACER900, YAMAHA NIKEN, YAMAHA MT-10, YAMAHA MT-07, YAMAHA NIKEN GT, YAMAHA MT-09, YAMAHA MT-03, YAMAHA XMAX
I am satisfied.
I bought it to increase the load capacity
It is very attractive that it can be installed in EUROYamaha OEM Carrier without Base!
The size is not excessively large and easy to use
I've been using it for about 4 years and it's been very durable as it hasn't broken anywhere
Unfortunately, I've given away my Yamaha Motorcycle, but this Top The case purchased UniversalBase and
I have been using it continuously
View detail