Reviews
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Packing can be taken
The capacity is satisfactory. The packing (Gasket) attached as a watertight measure is easy to remove!
When the case is opened with a full load of something in it, the packing may interfere with the object, causing it to fall out.
It's easy to reattach it, so I push it back on with a lot of pressure, but honestly, it's a hassle.
We plan to glue it up eventually.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Mounting LargeChange!
The installation was a hassle anyway, I had to remove the Cowl around the Rear and the Damper at the SIDEPannier mounting point to install it.
If they had thought a little more about the design of the Mount plate, it would have been easy to remove the Grab Bar and install it.
The product itself has a sporty design and is unobtrusive when the Rear Box is not worn.
View detail
It wasn't in Screw.
It is a product for exclusive use of ToRacer9GT.
I bought it because there is an attachment with Damper mechanism for Side case in Toracer, and I was thinking that if I want to attach GIVI, I have to do a lot of processing.
I disassemble a part once in order to install Key cylinder, but when I try to disassemble again, I feel that Screw is too hard (Screw which cannot be tightened to the end occurs after all), and after removing Screw, there is Gold powder around it, and the part of Screw system is considerably about. After removing the screw, there is gold powder around it. (¯?¯?) It's a shame because of the price. It's too bad because the price is just too high... I don't know what's worth the price of this product.
ScrewQuantity to fix the key cylinder, which should be included in the package.:Because it was troublesome, I ran to the home-centre and bought a similar screw. 2pc was not found, and even if I tried to return it, the Dan Ball was taken out by Garbage, and Case was disassembled for the Key cylinder installation. I was reminded that the inspection immediately after it arrived was Large thing.
View detail
The accuracy of the parts is not good.
It is a product for exclusive use of ToRacer9GT.
I bought it because there is an attachment with Damper mechanism for Side case in Toracer, and I was thinking that if I want to attach GIVI, I have to do a lot of processing.
I disassemble a part once in order to install Key cylinder, but when I try to disassemble again, I feel that Screw is too hard (Screw which cannot be tightened to the end occurs after all), and after removing Screw, there is Gold powder around it, and the part of Screw system is considerably about. After removing the screw, there is gold powder around it. (¯?¯?) It's a shame because of the price. It's too bad because the price is just too high... I don't know what's worth the price of this product.
It is easy to install and remove from the car body, and the matching appearance is as expected.
View detail
Dedicated Case and Quantity:Set
I think it is necessary for the installation of the Side case only for Tracer9GT.
I think, because the role of this Parts is the Quantity of Side case:Pair (for Left and Right) Because the role is only to absorb the vibration that shakes to the
In fact, when I put Case on, I found that this Parts doesn't work to support Case.
But in that case, the load of the part where it attaches with the body and the main increases, and the claw of the part where it attaches with the Case might break and fall off.
I don't want to be a pillar of humanity, so let's put it on straightforwardly.
It's a pretty heavyParts, so the weight of the car will increase. Let's hope I go on a diet to lighten it up! (Lol)
View detail
YAMAHA Saddlebag Support for Adventure Rear Carrier NOT Fitted to 2015 Yamaha XT250 Serow
I ordered this pair of saddlebag support rails for my 2015 XT250 Serow to mount on a Yamaha rack I also ordered. The rack is great but the rails do not fit it. The mount points on my rack are 180mm apart but the saddlebag rails are approx 297mm apart. I suspect it's my fault for ordering the wrong part as now I see it states that the rails fit the ADVENTURE rack, not the one I ordered. Hoping for some kind of exchange from Webike and they seem like good folk. Apart from that the support rails do seem to be well made with decent machining and neat welds plus the coating seems quite durable. That's all I can say for now. View detail
Not complete set
The item not included the rubber pad.why?im very upset coz i need this rubber for fitting the luggage.im very upset very expensive and that item not complete set. View detail
Fits: YAMAHA XT250 SEROW 1YBL 1YB9 1YBF 3C5Y 3C5M 3C5C 3C56 3C5S
Functionally satisfied?
I rubbed with Back at Hokkaido Touring for a week, the Black paint was scarred and thinned.
(You can see Silver)
As of now it has not rusted.
Supporter So why can not you rub them?
The delivery was about three months in a while,
It will take about 3 weeks. I have to wait for three months, but I can not cancel it.
It was nice to have arrived early, delivery is dissatisfied.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Well, it is suitable for the price.
As it is a Type installed with Suction Cup, I first thought that it was a defective product because it was out of packing, as soon as I took it out of packing, I was thinking it was a defective product, but if I washed the Suction Cup with a mild detergent and cleaned Tank again , It has stopped coming off. (I think that it is better to have a little explanation. )
R25 has a flat part of Tank when installing the Suction Cup, so it is difficult to install such special items, so I think that it is unlikely that it is universal Tank Bag first.
However, since it only comes with smartphone and Battery, do not expect it except for its use.
Also, from the top of the transparent Vinyl, the response of the smartphone is bad.
View detail