Reviews
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
![Service Manual [Supplemental Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
Supplement for late model
It is a Supplement to the Second Type Model of XJR400R.
Each adjustment point corresponds to a later period.
The vehicle I purchased was a MODEL with Immobilizer, so I wanted to check the Wiring diagram around the Front and to check the detailed differences.
The information I wanted to know was well described, so I could check it while performing maintenance.
View detail
To maintain your car properly
You will get detailed and correct information.
However, in my case, I bought it in the sense of Collection.
View detail
Fits: YAMAHA bolt, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, SUZUKI BOULEVARDS50(INTRUDER800,VS800GL), SUZUKI DESPELADO800(MARAUDER800/VZ800), YAMAHA Bolt, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1700R100 ROADSTER, SUZUKI INTRUDER1400, BMW R1200C, HONDA VT400S, HONDA VT750S, HONDA SHADOW Custom, HONDA SHADOW400, HONDA SHADOW750, HONDA STEED400
I use this Type from Y's Gear on every Motorcycle!
This cover is a domestic product, and I have always used this type of cover from Y's Gear, including my previous motorcycles, and this is the third one of different shapes that I have purchased.
This type is not Completely WaterproofSpec. but it is designed to be used in the event of heavy rainfall, where some rainwater will soak into the MotorcycleBody. (3rd photo) I buy knowing that.
one-eyed:Kawasaki Ninja 400 => The size of the cover was a little too large. (Maybe I got the Size wrong) The wind was blowing, the Cover was flapping, and the corners of Henry beguine's synthetic leather SeatBack were rubbed and sore. (5th photo) I think it is better to protect the attachment of soft material with Towel or something and cover it with Cover. I think it is probably due to the flapping caused by the wind.
The second:Imported 750cc => Almost ExactSize for three whole years and still in use, no tears in Cover, with Hole. I think it is an excellent product. During the rainy season, the inside of the MeterGlass fogged up once when I left the Cover on and the motorcycle steamed up, but it was fixed by removing the Cover and drying naturally. I think it is inevitable when storing outdoors.
third (e.g. in a series) (Item purchased this time):Yamaha Bolt => Almost ExactSize and will last as long as the second one. Leather Tool case with 100size, for human head, WaterproofShowerCap (3rd photo) and then this Cover is applied over it.
I think it fulfills its role as a Motorcycle Cover well.
When outdoors, I use the Covers because I think they are more dust-proof and also provide some security measures than storing the motorcycles bare.
Our Motorcycle Placement (Outdoor) The building is not exposed to direct sunlight until late afternoon. It also has a roof that is about the size of an eave, and depending on the direction of the wind, it can also keep out direct rain. Therefore, the Motorcycle Cover may have lasted for a long time.
As noted in the notes, the heat of the Engine and Exhaust System is allowed to cool before applying the Cover.
View detail
An indispensable book
As it is well known, this book is indispensable for maintenance.
This is the second model that I have purchased, but I need to refer to the parts catalog because I can't find detailed parts part numbers and connector shapes only from this book. Also, the price is ….
View detail
Easy to understand.
[How is it used?
Was the one you received as per Image? Better than I expected.
How was your experience with it? Careful explanation.
[Points to note] It is not yet in use.
How did it compare to other products? Good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Installation is very easy, but curing is required.
I installed it on a YZF-R7 and there are no problems.
The rear seat is small, so it is a little difficult to fix the seat bag.
I appreciate this kind of OEM side bag development.
With Universal's Side bag, you need to fix the belt back and forth.
In the case of this product, it is very easy to insert the Bracket into the Pocket and connect it to the Buckle.
It is also a good Point that is taken into consideration so that the excess Belt can also be rolled.
It would be a good or bad thing that the Bag itself only has an opening at the top.
I don't mind, but if you put a lot of small things in there, you may have a hard time taking them out.
In addition, when installing the device, it is necessary to pay attention to the speed limit and balance.
Curing is essential as it interferes with Cowl with gusto.
It is an exclusive product, but I would appreciate a lower price.
Bracket and Quantity:40,000 yen for a set is quite...
View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
YZF-R15Parts List
We had a hard time identifying the target car model.
What is the other book 1CK4.5?
I thought about buying one to see if...
View detail
Made of soft PVC (polyvinyl chloride)
Body bends loosely. No bad interference with other objects.
I am a HONDA party, but my bicycle is a YAMAHA, so I bought it for that.
Frankly, YAMAHA's Tuning Fork Mark is not as high as HONDA's WingMark.
But I felt the price was a bit high for this.
When I carry it with me, I keep it with my other keys, but when I drive, I use the One-touch to disengage it so that I only have the keys and the light Key Holder.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700
Purchased to deter theft.
Purchased W800 new car to earth lock for theft deterrence.
It is 2.5m long, so it is easy to connect to Motorcycle.
Now I guess we'll see about the durability.
View detail
Fits: YAMAHA TRACER900, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
Side case is required
It was installed at the same time when the car was delivered.
Since it is OEM, we have no complaints about Fitting and Key.
However, the drawback is that the capacity is small and expensive.
I was told that it could not be used in conjunction with Top case, but as long as I don't drive too hard, I have no problem so far.
I installed the Reflector on the side by myself, for safety.
Some people have put an iron box on their Racer, but I think that an iron box on this motorcycle would be a little too heavy (heavy weight).
(This does not mean that the OEM is not a good fit) and OEM. If you have a full Pannier + SeatBack, you can get a Large in time.
The Side case is basically left on, the Top case is basically removed, and the Ron Two case is put on.
I also thought about purchasing an inner bag, but I am still considering that one.
It is not an OEM, but is an Other Brand Product.
View detail
To get down to business, .
[How is it used?
I have owned a broken SEROW225 (1KH) for several years, but have been operating it naively.
Since the structure is relatively simple, we were able to do it naively while understanding the structure while Rose.
Recently, I decided to do something around Engine, ”let's do it right”, and I've made up my mind to do it.
(a little expensive). I purchased the Service manual to ensure correct maintenance.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
What is the right thing to do? I thought it was quite Large that I understood the
until now Maybe this will work. I can be confident in the Oh, no. and finding mistakes, etc. It is like trying to match the answers.
[Points to note]
Nothing in particular. The cover is easily dirty.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Required for luggage loading
This product is a plate for installing OEMTop case.
You will need a separate Rear Carrier Base.Top case has not been purchased yet, but I am installing a Krieger US20. There is a way to use the Tandem part of the Seat, but I personally don't like it and wanted to be able to do the Tandem as well, which is why I bought it.
The OEM is textured and the build quality is solid and secure. However, I think the price is high; it is nice that it can be separated from the Rear Carrier Base, but I would like to see the price a little lower.
View detail
That's a ManufacturerOEM Product!
The Seat bag was installed because without it, the Seat bag would not be long enough and the posture would be too tight.
This gives more room on the seat surface and stabilizes posture.
It also has a composite tube and functions as a grab bar for Tandem even if nothing is placed on it.
However, it is a bit pricey, and a separate TrunkMount base is required to attach the Top case.
It is not very cost-effective because it is necessary.
View detail
I thought it would be a bit larger...
The box it arrived in was also large, so I thought it would be small. I have not purchased the bag, but I wonder if the bag is also a little small. I have not purchased the bag, but I think the bag might be a little smaller than the bag. View detail
A little large.
[How is it used?
I was looking for a Key Holder to attach to my motorcycle key, and since it is a Yamaha Motorcycle, I purchased this one.
The Black looked a little cheap in the picture, so I chose the Brown, even though I was worried about stains.
Was the one you received as per Image?
As shown in the photo, it is quite solidly built.
However, the key is too large for a recent motorcycle, but for an old car, the key is too small, so I think it is too large.
How was your experience with it?
The Ring part is too firm, so it is a little Large strange to put it through the key.
As mentioned above, it is a bit large for the key, but I don't mind the large size when I am riding my motorcycle.
We are satisfied with the appearance of the product as well as the prevention of loss.
【Review】
The quality of the product itself is good, and I am first of all satisfied.
If possible, it would be nice to have a smaller size.
I have also used the Rubber Key Holder from Motif, a Motorcycle body, but that one comes off quickly, so I think this product is better if you are not sure.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
That's the OEM Parts!
I wanted Side Back and decided to go with YamahaOEMParts.
There are less expensive ones, but I chose this one because of its design and fit.
As expected of OEM parts, the installation is also very exacting.
However, there is a sense of hanging on.
It is different from the hard case's clingy fixation.
I usually remove it, so I like that it can be easily detached.
It is convenient to have storage space.
View detail
after much trouble
I had been wanting to get one for a long time, but had not been able to afford it, but when the electrical system failed, I bought one.
A book that is somewhat safe to have.
View detail
Parenthesis y!
The beautiful Yamaha blue color is a perfect match for the motorcycle.
The embroidery is beautiful and well made.
View detail