Reviews
![Service Manual [Complete Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
Fits: YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER
It's a must for self-maintenance.
I am glad I bought this book because it contains disassembly and assembly procedures and key points. I'm just an amateur, so I had some difficulty with the names of parts and tools used, but I think it's essential if you want to do maintenance yourself. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Packing can be taken
The capacity is satisfactory. The packing (Gasket) attached as a watertight measure is easy to remove!
When the case is opened with a full load of something in it, the packing may interfere with the object, causing it to fall out.
It's easy to reattach it, so I push it back on with a lot of pressure, but honestly, it's a hassle.
We plan to glue it up eventually.
View detail
Fits: YAMAHA bolt, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, SUZUKI BOULEVARDS50(INTRUDER800,VS800GL), SUZUKI DESPELADO800(MARAUDER800/VZ800), YAMAHA Bolt, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1700R100 ROADSTER, SUZUKI INTRUDER1400, BMW R1200C, HONDA VT400S, HONDA VT750S, HONDA SHADOW Custom, HONDA SHADOW400, HONDA SHADOW750, HONDA STEED400
I use this Type from Y's Gear on every Motorcycle!
This cover is a domestic product, and I have always used this type of cover from Y's Gear, including my previous motorcycles, and this is the third one of different shapes that I have purchased.
This type is not Completely WaterproofSpec. but it is designed to be used in the event of heavy rainfall, where some rainwater will soak into the MotorcycleBody. (3rd photo) I buy knowing that.
one-eyed:Kawasaki Ninja 400 => The size of the cover was a little too large. (Maybe I got the Size wrong) The wind was blowing, the Cover was flapping, and the corners of Henry beguine's synthetic leather SeatBack were rubbed and sore. (5th photo) I think it is better to protect the attachment of soft material with Towel or something and cover it with Cover. I think it is probably due to the flapping caused by the wind.
The second:Imported 750cc => Almost ExactSize for three whole years and still in use, no tears in Cover, with Hole. I think it is an excellent product. During the rainy season, the inside of the MeterGlass fogged up once when I left the Cover on and the motorcycle steamed up, but it was fixed by removing the Cover and drying naturally. I think it is inevitable when storing outdoors.
third (e.g. in a series) (Item purchased this time):Yamaha Bolt => Almost ExactSize and will last as long as the second one. Leather Tool case with 100size, for human head, WaterproofShowerCap (3rd photo) and then this Cover is applied over it.
I think it fulfills its role as a Motorcycle Cover well.
When outdoors, I use the Covers because I think they are more dust-proof and also provide some security measures than storing the motorcycles bare.
Our Motorcycle Placement (Outdoor) The building is not exposed to direct sunlight until late afternoon. It also has a roof that is about the size of an eave, and depending on the direction of the wind, it can also keep out direct rain. Therefore, the Motorcycle Cover may have lasted for a long time.
As noted in the notes, the heat of the Engine and Exhaust System is allowed to cool before applying the Cover.
View detail
It was new!
It was an old Scooter Manual, so I ordered it not expecting it to be new.
I was surprised to receive a brand new, completely unused product.
View detail
An indispensable book
As it is well known, this book is indispensable for maintenance.
This is the second model that I have purchased, but I need to refer to the parts catalog because I can't find detailed parts part numbers and connector shapes only from this book. Also, the price is ….
View detail
Easy to understand.
[How is it used?
Was the one you received as per Image? Better than I expected.
How was your experience with it? Careful explanation.
[Points to note] It is not yet in use.
How did it compare to other products? Good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Installation is very easy, but curing is required.
I installed it on a YZF-R7 and there are no problems.
The rear seat is small, so it is a little difficult to fix the seat bag.
I appreciate this kind of OEM side bag development.
With Universal's Side bag, you need to fix the belt back and forth.
In the case of this product, it is very easy to insert the Bracket into the Pocket and connect it to the Buckle.
It is also a good Point that is taken into consideration so that the excess Belt can also be rolled.
It would be a good or bad thing that the Bag itself only has an opening at the top.
I don't mind, but if you put a lot of small things in there, you may have a hard time taking them out.
In addition, when installing the device, it is necessary to pay attention to the speed limit and balance.
Curing is essential as it interferes with Cowl with gusto.
It is an exclusive product, but I would appreciate a lower price.
Bracket and Quantity:40,000 yen for a set is quite...
View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
Easy installation
My motorcycle is YAMAHA XMAX300. I need to take my children to school at ordinary times, so it is not safe without backrest, so I bought this original backrest, which is worthy of the original parts. It is exquisite in design, and it can be installed without damage if there is a certain practical ability. Note that the back and base are sold separately. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA XMAX
useful bag
This bag is designed and produced by YAMAHA in Europe. It is mainly used with the 39L tail box. It can be placed in the tail box tightly. Of course, it can also be used alone. The bag is carefully designed and designed, and the interior is shockproof. Although the price is small, it is recommended to buy. -------------------------------------------------- -------- This bag was designed and produced by Yamaha in Europe. The main purpose is to use the 39L tail box. It can be placed in the tail box strictly. Of course, it can also be used alone. Although the price is expensive, it is recommended to buy. Powered by Google Translator View detail
YZF-R15Parts List
We had a hard time identifying the target car model.
What is the other book 1CK4.5?
I thought about buying one to see if...
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
The tail box that can be loaded
This YAMAHA Euro rear trunk has a volume of 50L, which can carry a lot of items, which is enough for a long-distance motorcycle trip. The weight of the rear trunk is only 4KG, which is very light, and the original factory workmanship is also very strong. It is necessary to pay attention to the installation of this The tail box needs to purchase the lock cylinder A or B separately, and the matching shelf is required to install it smoothly. -------------------------------------------------- -------- After this Yamaha Euro, the luggage accumulation is 50L, which can be loaded with a lot of items. It is enough to cope with the long -distance motorcycle brigade. The weight of only 4kg in the rear box is very light. The original workmanship is also very strong. The tail box needs to buy lock core A or B separately, and the supporting shelves are required to be installed smoothly. Powered by Google Translator View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA XMAX
soft backrest
I bought this YAMAHA rear glove box backrest from webike. It can be installed on the top of my 39L trunk to make the people in the back seat more comfortable. Its area is larger than other cushions and the softness is good. The installed Sometimes you need to drill holes in the tail box to install it. I bought this YAMAHA rear box back to the back of the Webike. It can be installed on the tail box of my 39L to make the people in the back seat more comfortable. Its area is better than other cushions. Time needs to be poured on the tail box to install. View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA TMAX530, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09
Very expensive.
I bought this to install a DIY Container box on my y'sGEAR Carrier. I understand that it is expensive due to small production. I think it is unavoidable. However, I think it is reasonable to pay 500 yen.
I guess it could be that it was used outside of the dedicated product at 100 paces, but the Bracket fell out even though it was tightened with the specified Torque. We had taken other measures to secure it, so the box did not fall off. I think it is necessary to check the tightening of the bracket during breaks.
View detail
Made of soft PVC (polyvinyl chloride)
Body bends loosely. No bad interference with other objects.
I am a HONDA party, but my bicycle is a YAMAHA, so I bought it for that.
Frankly, YAMAHA's Tuning Fork Mark is not as high as HONDA's WingMark.
But I felt the price was a bit high for this.
When I carry it with me, I keep it with my other keys, but when I drive, I use the One-touch to disengage it so that I only have the keys and the light Key Holder.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10 SP
Y's Gear for YAMAHA riders
[How is it used?
Chain maintenance, etc.
Was the one you received as per Image?
As shown in the Image. The color of the baked finish!
How was your experience with it?
This was my first time using Maintenance Stand, but I researched on Net and YouTube before STAND-UP. It's a little nerve-wracking, but once it's on the Hook, it goes up quickly and easily!
[Points to note]
Although this product itself does not have this problem, I think you should check the Front Brake Lock and other parts carefully because you may knock over the motorcycle if you do not use it faithfully to the basics.
How did it compare to other products?
I think the price is high. I think the price is high, but it is good because Parenthesis is good.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R25, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA XMAX
For YAMAHA 39L rear storage box
I bought a YAMAHA 39L rear storage box from webike, and when it arrived, I found that it was not equipped with a lock cylinder. As a result, the instruction manual said that the lock cylinder needs to be purchased separately with a type A or B lock cylinder, and the type A lock cylinder can match the original motorcycle key. Type B is a separate key, my motorcycle is keyless start, so I bought this type B, it matches perfectly. -------------------------------------------------- -------- I bought the YAMAHA 39L rear box at Webike. After arriving, I found that it was not paired with the lock core. As a result, the instructions said that the lock core needs to buy a type A or B lock core separately. Type B is a separate key. My motorcycle was started at keyless. I bought this type B, which perfectly matched. Powered by Google Translator View detail
Fits: YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700
Purchased to deter theft.
Purchased W800 new car to earth lock for theft deterrence.
It is 2.5m long, so it is easy to connect to Motorcycle.
Now I guess we'll see about the durability.
View detail
Fits: YAMAHA TRACER900, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
Side case is required
It was installed at the same time when the car was delivered.
Since it is OEM, we have no complaints about Fitting and Key.
However, the drawback is that the capacity is small and expensive.
I was told that it could not be used in conjunction with Top case, but as long as I don't drive too hard, I have no problem so far.
I installed the Reflector on the side by myself, for safety.
Some people have put an iron box on their Racer, but I think that an iron box on this motorcycle would be a little too heavy (heavy weight).
(This does not mean that the OEM is not a good fit) and OEM. If you have a full Pannier + SeatBack, you can get a Large in time.
The Side case is basically left on, the Top case is basically removed, and the Ron Two case is put on.
I also thought about purchasing an inner bag, but I am still considering that one.
It is not an OEM, but is an Other Brand Product.
View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300AS, YAMAHA FJR1300AS, YAMAHA FZ8, YAMAHA MT-07, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA SCR950, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Easy to use original burglar alarm
My motorcycle is YAMAHA MT07. I often need to park the car on the side of the road. In order to prevent the car from being stolen, I need to install an alarm. I have seen other brands on other websites before, but most of them need to be broken. Or punch holes for the vehicle, I don't like this installation method, so I bought this original alarm on webike, non-destructive installation, the motorcycle has a reserved interface, just plug it in directly, the sensor has three The three induction modes can be adjusted, the vehicle shakes, and a loud alarm will sound. -------------------------------------------------- -------- My motorcycle is YAMAHA MT07. Because the bike is often parked on the side of the road. In order to prevent the vehicle from being theft, I need to install an alarm. I have seen other brands on other websites before, but most of them need to break the line. Or punching the vehicle, I don't like this way of installation, so I bought this original alarm on the webike, which is not damaged, and the motorcycle has a reserved interface. The sponsor mode can be adjusted, the vehicle shakes, and a loud alarm will be made. Powered by Google Translator View detail