Reviews
Good buy. Must wear in fall and winter!
[How is it used?
In use on NMAX 155.
We started using it in November in Kanto, where it has become a little chilly.
Was the one you received as per Image?
There was no Large Gap in the product performance itself, but the following two points were a little different from what I had imagined.
It was bigger than I thought it would be.
. more than I thought. [Color] It was Smoke (I was imagining something like Mellow Smoke).
Was the installation difficult?
There are no particular difficulties; simply remove the Mirror and re-tighten it together.
Since the MirrorMount Bracket is installed, it was a little troublesome to tighten it together with the MirrorMount Bracket in terms of adjusting the mounting holes.
How was your experience with it?
After installation, the effect was very Large and the running wind in my hands was drastically reduced.
When combined with Electrothermal Gloves, they run comfortably without any loss of warmth.
I have used it on rainy days, and it has a certain effect, though not as good as the Handlebar Cover.
Although the size is Large, the width fits inside the Mirror, so there is no problem with slipping through.
It is better to fine-tune the mounting position so that the finger fits firmly between the Brake lever and Knuckle guard.
If you install it with Rucksack re, you will lose the finger clearance and have to do the adjustment twice.
The effect of the installation is Large, so I plan to keep it installed through the fall/winter and early spring.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Quintessential OEM
I bought it to hide scratches and to prevent future scratches.
This is a quintessential OEM Product.
It can be attached perfectly and looks great.
View detail
Very good
I am very happy with the design that I never get tired of and the security of wearing it. View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Not much change.
I bought the standard Size because it was too tight.
It is only to the extent that it seems to have become a little kitsamashi.
View detail
Warmth comes from the hips.
I was so impressed with the MULTISTRADA 1000DS HeaterSeat that I had test-driven before that I decided to install it on my car.
Because it is a Yamaha OEM, installation is extremely easy. The connector on the car body side is also pre-wired for exclusive use, so the setup was completed just by connecting the two.
The STD one was thicker and I had no complaints, but the new one, which is called "Comfort," is even firmer and more comfortable.
Of course, sitting continuously for long periods of time, coupled with an upright riding position, will cause pain, but it will certainly reduce that pain.
The heat function was at a level where I could finally feel the effects of the heat when the output was set to max. I'm not sure if the skin on Small's butt is too thick, but I couldn't get a "wow!
However, this is going to be a tough season for Rider, and the benefit of having the Heat function is expected to be Large.
The Seat thickness has been increased, so there is a change in the footing level. If you can tolerate this, it would be a good choice for a long-distance companion.
In addition to the Engine and Lamp, recent vehicles have more and more items that consume power, so we need to manage the battery properly.
View detail
If you have it, it's safe.
The service manual is a good thing to have because it provides information that can be used to make decisions in the event of a problem. View detail
Fits: YAMAHA Bronco., YAMAHA Bronco., YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA SR125, YAMAHA SR125, YAMAHA SR125, YAMAHA SR125, YAMAHA SR125
ManufacturerOEM Product Peace of Mind
ManufacturerOEM Product for peace of mind. Reasonable price. Good delivery time.
One more thing that would be nice would be to include a card made of paper to write down the date and time of oil change and mileage. (I just need to write it on the memo paper and save it by myself.)
View detail
T9GT performance damper
Install performance damper on my bike. Previously bike feels a bit wobbly during high speed, now it's more plant and stable. Highly recommend for others thank. View detail
T9GT engine protector
Install engine protector on my bike. Material was sturdy and fits well, giving added protection on my engine in case on accidently drop. View detail
T9GT comfort seat
Install original comfort seat on my bike. It provided extra cushioning for my butt and good support on long distance trip. Highly recommend for others thank. View detail
T9GT comfort seat
Install original comfort seat on my bike. It provided extra cushioning for pillion and good support on long distance trip. Previously pillion can easily slide up front (especially on hard braking) causing uncomfortable for rider. Highly recommend item to upgrade. View detail
Best protection pads
Install new production pads on my bike. The material is with highest quality. It fits well and looks good on my bike. Highly recommend for others thank. View detail
The pressure on the cheeks is somewhat better.
Replacing it will relieve some of the pressure on the cheekbones.
But,
It is better to increase the HelmetSize by one size than to replace it with a thinner Cheek Pad.
I recently thought it might be a good idea...
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 Tracer, YAMAHA MT-09 Tracer, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
I'm glad I traded up.
I replaced it myself, but it was quite large.
However, the effect is outstanding.
It was amazing to be able to feel the change just by stepping over the Motorcycle before starting to ride.
When I drove the car, I could feel that the rear of the car was so soft and smooth on the road surface, whereas the normal suspension made the car feel fluffy and unsettled.
Sorry, I'm not very expressive. Crying
As others have mentioned, I'm a little concerned about the orientation of the Preload Adjuster hose coming out of the bottom side near the Engine.
View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Essential for DIY maintenance
Recently, when I buy a motorcycle, I always buy the service manual along with it.
I don't do much tinkering with my motorcycle anymore, but I want to do at least some maintenance myself, so I think Torque Management is essential.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Don't fall down.
Engine, FR/RRAxle, ClutchBox, Generator, etc.
There are various types of sliders and guards, but this time we installed a guard on both sides of the engine.
I don't want to test the effect too much, but first of all, I think it will be grounded first because it sticks out more properly than EngineUnit.
The foundation is made of Plate and Pipe of the genus Gold, and is attached to the frame, creating a certain degree of rigidity.
In addition, the gold plastic finisher with the Yamaha logo and the decorative spacer reduce the ruggedness that is often seen in the Guard and make it a stylish Yamaha-like product.
I don't want to be a burden to you, but I think it is a good choice to stock up on them as a fallback plan.
One point, the bolt at the stopping point on the front side of the vehicle may need to be Torque managed properly.
Incidentally, there is another YamahaOEM in the shape of a starfish, which is also a Quantity:I think it will be even more prepared if it is attached with a Set.
View detail
Fits: YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
sure enough
I think the quality is good because it is a product of Y's Gear. It is difficult to install this product if you only own a Wrench. At least Wrench, Ratchet, Tie Wrap, and Nipper are necessary. The quality is good, so I am satisfied with the cost performance. However, I think the load limit cannot be relied upon in a good way. I think so. View detail
Windproofing and soundproofing effects are there.
This is a replacement from Puch Screen.
PoochScreen is Large type and will look forward over Screen.
The windproofing and soundproofing effect is very large, but on the other hand, in the rain, raindrops on the screen significantly worsen forward visibility.
This Screen is about 12 cm shorter than the pooch and has good forward visibility.
However, it was not as windproof and soundproof as expected.
It would have been nice if the front edge of Screen was 5 cm higher.
Of course, the effect is much larger than the OEM's initial Screen.
The quality of the Acrylic pooch is almost undistorted and you can see the front over the Screen, but this Screen looks slightly distorted.
In the middle of winter, when there is little rainfall, I think I would revert to pooch.
View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail