Reviews
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XV400U, YAMAHA YJ50SP, YAMAHA XV1100, YAMAHA SRV250, YAMAHA V-MAX1200, YAMAHA SRV250S
Large and easy to read Mirror!
[How is it used?
KIJIMA's Mirror was not practical and was replaced in tears.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It is only a replacement for the NORMAL. It can be installed without any problem at all.
And since it is for Yamaha, no Adapter is needed.
How was your experience with it?
It is large, not blurred, and very easy to see.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
It is a little too large to be stylish, but I would give it a high score.
▼Mirror is Large but this Mirror is easier to see than Normal and is a good recommendation with good parenthesis!
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
Yamaha's Opposite Thread Screw is a pain!
Since Yamaha's MotorcycleRight Side is an Opposite Thread Screw, it is a gate that everyone must pass through when replacing the Mirror.
I have to bother to bite the Adapter, but I can't help it since it is a Spec. (Lol)
As for durability, it is Steel and will eventually get Rust. In my case, I am sorry to say that the Screw pile somehow lost out to Aluminum and was crushed.
View detail
Hard to install and unintelligible V-Cut
We signed a purchase agreement for the vehicle last December, at which time we also placed an order for this Option. The car was delivered on April 17, but the Option arrived in late June.
Installation is unusually difficult, probably due to the radiator shape, regardless of whether it is an OEM or other brand product.
When I installed it, I found a V-shaped cut in the upper center of the Radiator, which is not guarded in any way. Is there any meaning in that V-shaped cut?
I should have bought Other Brand Product, I thought.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-09, YAMAHA CYGNUS Gryphus, YAMAHA MT-09 SP, YAMAHA MT-09 SP
This is very useful
[How is it used?
I installed it on my MT-09. The price is reasonable, including the additional Spacer that was required for installation.
Was the one you received as per Image?
I had checked various sites and found that Helmet could just barely fit in the box.
Some items did not fit, which was slightly different from the Image.
How was your experience with it?
It is very convenient to have it because it can be used as a backrest for the person behind you in the Tandem, and most importantly, it can hold more luggage than you think it can.
[Points to note]
Note that with the MT-09, this upper type is a spec. that fits perfectly without doing anything, but with the MT-09, it is a spec. that fits perfectly without doing anything.
30Type L requires a Spacer, so that's about it? I think it is not so much.
View detail
Overpriced and out of stock
I had a hard time finding it in stock.
It just happened to be there and saved the day.
View detail
Size is standard
I purchased the Anthracite M. I have read many reviews on other sites that the size is too small.
I was completely right not to be misled, although there may be some differences in fittings from one manufacturer to another.
I ordered a HJC CS-15 in M and it was just the right size because I had no problem with the M. I have a question......................
When you put it on, do you put it on while spreading the two ends? Naturally, the neck area is narrower.
I have to spread it out to put it on properly. The chinstrap was fine. Numerous Reviews.
I am really, really glad that I didn't get swept away just because it is there. However, Shield is expensive.
Durability is still unknown.
View detail
Increased loading capacity
I think it's good
Carrier is light and does not affect the ride.
More importantly, the ride quality is always bad due to overloading beyond the load capacity. w
Mostly satisfied
View detail
I haven't tried other products, so I can't compare.
I have no complaints at all, from the removal of the NORMALRFender to the installation of the Fender Eliminator Kit, which can be done without any problems by following the instructions in the attached Instruction Manual.
The License Plate Angle, License Plate Light Illumination, and Reflector, which should not be complained about even if it is brought to the DMV Inspection Line as it is.
The design is not too flashy, just right.
View detail
Fits: YAMAHA YZF-R7
Used for XJR400R
YZF-R7 is using SumitomoCaliper's Brembo radial pump, so we installed it on XJR400R. The separate tank bracket and the bracket to prevent the tank lid from loosening are OEM products that must be purchased separately. It is quite easy to operate. View detail
OEMs are sure.
Since it is an OEM, I don't think this is the best way to go about it.
I don't know until I need to be concerned about OEMs.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT23, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT23, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
OEMParts are trusted Large!
Installation was difficult due to the structure of the vehicle, but since it was OEMParts, it was safe to use. I removed the old one and saw that it was still usable even after driving 20,000 km. View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XV400U, YAMAHA YJ50SP, YAMAHA XV1100, YAMAHA SRV250, YAMAHA V-MAX1200, YAMAHA SRV250S
YamahaY's Gear Rearview Mirror Evaluation
I purchased this to replace the Rearview Mirror on my vmax 1200.
As expected of a Y's Gear Yamaha product, Mirror's visibility and texture are unmatched by other products.
The Mirror replacement and installation process was easy, even for an amateur.
The Mirror attached to the used Vmax of a low model year was Other Brand Product Mirror, but the newly purchased YamahaY's Gear product has changed the Mirror to Quantity Mirror.:Pair (for Left and Right) Both Yamaha OEM Mirror models provide good visibility and a pleasant touring experience.
View detail
Fits: Others YF-9 ZENITH SportsStripe, Others YF-9 ZENITH Pinstripe
easy to read
The Visor should be spread out until it is completely flat. View detail
Fits: YAMAHA MT-07, YAMAHA XSR700, YAMAHA XSR700
as it should be
I had replaced the Rear with Y's GearKYB earlier and finally replaced the Front as well.
OEMFork (Oil viscosity + oil level adjusted) It's almost OH time, so I thought it would be just the right time for Timing.
The MT-07 was the first MT-07 to be modified with front and rear suspension. It's the way it should have been." I have the impression that the Motorcycle has become a "Motorcycle".
Due to strict Cost constraints. 250cc with horsepower." The 07 is an undeniable "07," but it is a fine 700cc sports-type motorbike when taken to this level.
The damping is properly applied, so there is no slamming when banking over rough surfaces or through gaps. Even in situations where you are driving at a leisurely pace, the Quantity:Depending on the set, it is less lumpy than NORMAL, but rather more comfortable because of its better fit.
Since it is a ForkAssy replacement, the work hurdle is lower than installing a CartridgeKit or PD Valve.
The Spring is common with NORMAL, so it is possible if you plan to ride for a long time, including future customization.
View detail
It was surprisingly Tight.
I have been using SHOEI and ARAI Helmet.
I was thinking of buying a size M this time as well, since I felt like I was an Exactly in size 57-58.
I dared to choose L Size because it was out of stock, but it was surprisingly Exactly.
I wear Glasses, so the M size might have been a little tight.
I haven't made any long trips yet, so I don't know how it feels to wear it for long periods of time, but it's not bad.
View detail
It's vulnerable to scratches, but what can I do?
The OEM Clear shield was so badly scratched and visibility so poor that I went with the Blue shield while replacing it.
I waited a month and a half for a BackOrder that was ready to be out of stock because the color was lighter than what I had seen in the pictures.
During the daytime, it is very easy to see. No glare.
At night, it was darker and darker than expected.
Since it is an Anti-Fog Shield, it is susceptible to scratches, but this time, I applied glass coating to test it as well.
If this can be kept for about 6 months, the pace of Shield replacement will be extended, so I think Merit will be there.
View detail
Fits: YAMAHA FZ6-S Feather, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6-N, YAMAHA FZ1, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
When in doubt, OEM
There are other brand products that are cheaper than this, but here we use reliable OEMs.
I heard that some Other Brand Products are stingy with their internal structure.
View detail
It would look better if it were there, but it is sold separately from the Sissy bar.
Sissy bar and Quantity from YamahaOEM:It is a Pad that will be Set.
The zipper allows you to take out the sponge inside, so you can do things like maintenance.
It seems to be a ManufacturerOEM, but considering the price, it seems so expensive that it is no wonder! However, considering the price, it seems to be so expensive that it is no wonder!
Bar and Quantity:It would be nice if there was a Set sale for a slightly lower price, or something.
View detail
It is just the right Size.
I like the size, which is not obtrusive, but still makes a statement.
It is not recommended, but it is convenient to hang a bit of Helmet.
I think the quality of the paint and the quality of the OEM parts is quintessential.
Since Tandem is almost never done, the appearance is determined though the Parts are attached only by Parenthesis.
But the fact that the pad is sold separately is a little bit annoying...
View detail
Diversion to HJCHelmet from Y's Gear OEM source
Helmet is HJC's IS33?
One of the pins of the standard Pin Lock Shield was removed and the wind noise while riding was noisy, so I thought about buying the same Shield, but I learned from Impression that a Shield that does not support Pin Lock from Y's GearYJ17 is available, and since it is less expensive than the Pin Lock Shield, I bought this Shield. I bought this one because it is less expensive than the Shield and I don't use Pin Lock Seat.
The only difference is that it is not compatible with Pin Lock Seat, and the engraved model number is exactly the same, Exactly attached.
View detail