Reviews
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
SRX400 (3VN) Savior of the
SRX400 (3VN) The Arm part of the Blinker is made of rubber, so it breaks off over time. Each time this happens, we have been replacing it with OEM parts, but the price is 10,395 yen! I was looking for other brand products and found this product. There is no SRX400 in the list of compatible models, but there is SR400, and it is Wise GEAR, and it looks the same, and the name of the product is "SRX400". "Universal I bought it, and it fits perfectly. the diameter of the recess of the Rear Fender and the position of the potch are Exactly, and the shape seems to be the same as the OEM. As you can see in the picture, the color of the Lens is Clear, but the Valve is Amber, so I thought it was OK. The price is about double compared to other brand products, but I was able to buy it for 7/10 of the OEM price, so I am satisfied with it. View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
It went on easily.
Although it was described as mediocre, it is exactly the same shape as the SRX400 (3VN) OEM blinker, and I was able to install it without any modification.
I also like Clear Lens.
The quality is good, as it is a quintessential Y’sGEAR product.
View detail
Fits: YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt
Yamaha Turn Signal Relocation Kit
About quality and texture - Quality as usual with Yamaha is good. About the feeling of use - No issues. The turn Signals are easy to see and there is enough room for the Saddle Bags. Products to buy together - Nothing. Difficulty of installation - Installation is not hard, takes two to three hours. I took my time. You have to access the wireing harness, so the rear fender needs to be removed and then reinstalled. I like the way the rear fender looks on the Bolt and I did not want to use the Fender Eliminator Kit. I am glad this kit was available. Cost performance and comparison with other products - Reasonable. About shipping and packaging - Excellent. Any concerns, cautions, or advice when purchasing - None. View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
I use Front and Rear Set.
I used to use CB71Type's small Blinker, but I felt uncomfortable with the small Blinker as I proceeded with OEM-like customization, so I decided to use this one which is used by OEM.
It's highly visible and has a 70's and 80's look to it.
good point
This is an OEM product, so the brackets are strong and durable.
Visibility is not a problem. No problem with visibility.
It looks like an 80's motorcycle.
It can be used not only for SR but also for XJR.
A bad point
The price is high. The price is high, but the product is good.
I think the initial model SR500 blinker was the same shape as this one…Square TypeBlinker but it has a classic look.
It is described as Universal, but it is a proper part because it is an OEM of Yamaha.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
There is no Instruction Manual or anything like that.
If you remove the License Plate, you will find a similar part, so it is like replacing it with this one.
If you just want to install it, you can use 4 Small Bolts (License PlateQuantity:2pcBracketQuantity:2pc), but I have to disassemble the whole Rear Fender for wiring and Blinker removal.
I drilled a hole in the mudguard to get around the Wiring, as there was a good depression next to the Bolt that holds this Bracket in place.
You don't need to extend the wiring itself, and you can handle it as it is in NORMAL. (The Blinker's Wiring is pulled from the Coupler in the Wiring compartment behind the Tail Lamp, so there's no need to mess with the Wiring itself.)
There is a cutout in the mounting hole so that the Bracket on the base of the Blinker can fit in the wrong direction, so it is easy to fix the Blinker temporarily and check the direction.
It's a full normal car, so I don't know how to attach it to an external Fender etc.
View detail
It's a RALLY50 atmosphere!
My father-in-law's ToRacer 2017 with piaa Fog Lamp and Quantity:We installed it with the Set. The installation was left up to us from the order at a certain Large type nationwide ChainMotorcycle dealership, but we thought it would have been good to install it ourselves since it didn't seem to need any special processing. View detail
I could use it to put on an external fog.
I bought it because it's an OEM fog bracket, so it was strong enough and seemed to be able to be installed reliably.
The fog itself is Yahoo! Chinese.
The size of the fog attachment area is almost the same as the OEMOption PIAA. Because the size was Size, Washer was the quantity:I added only 1pc. and installed it.
Parts that can be hung, so the strength of the OEMBracket is all you need.
View detail
ManufacturerOEM, but it's hard to install
The bracket can be perfectly fixed with the exclusive design of the car
Anyway, it's bright and easy to drive
I don't drive much at night, but I can feel the effects when I go into Tunnel
For safety reasons, I take falls all the time There may be pros and cons to this
Although there is a detailed instruction manual for installation, it is not as easy as it sounds It is difficult to install in some areas
LargePeople have difficulty with male fingers, so you may want to borrow a woman's or a child's hand for a Smooth It is not
It's just a bit expensive
You can buy it on Amazon or something like that as a Single Item for about the same amount of Gold Most importantly, you can't get an Exclusive Design Bracket
Meekly this Quantity:It is recommended that you purchase a Set and pay for the labor to have it attached to the shop
View detail
It is a wonderful item. The price is high (; _ : )
Depart before sun rises, arrive at your destination at AM 7 o'clock, arrive at the return home after eating local breakfast, and enjoy Touring at the Style where you will return home by 2 PM at the latest. (Then Family Service)
For this reason, but I often pass through the mountain road just at night, with absolutely no mountain road of street lights "One by one is darkness" I was scared of the situation and decided to purchase.
At the beginning A AZ ○ N thought about cheap fog selling at N, but I felt uneasy about footing and reliability (important) Purchasing daringly with the desire to introduce high ones.
I am impressed with high precision about Footing.
I feel the brightness of lighting as PIAA!. Late night & heavy rain & no street light & used under bad condition of mountain road, we could drive safely. It was expensive but I'm glad I bought it.
Digression : It was surprisingly surprising that it was interrupted in the front.
View detail
Great.
I bought SEROW, but I just purchased Fog Lamp because I could not do much night driving with Headlight alone.
The impression attached was satisfactory.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
Since the car body was a Silver, it becomes the shapely tightened Image and is very more satisfactory than the black/Orange of until pure. Attachment was completed without also carrying out end processing of wiring and processing anything. It is time re
Since the car body was a Silver, it becomes the shapely tightened Image and is very more satisfactory than the black/Orange of until pure. Attachment was completed without also carrying out end processing of wiring and processing anything. It is time required 10 minutes. View detail