Reviews
Fits: YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt
In addition to the OEMSaddle Bag
The Bolt's rear blinker is located in a position where it easily interferes with the saddle bag attachment, making the choice of a saddle bag surprisingly difficult. By using this Relocation Kit, the interference between the blinker and the bag can be almost eliminated, and the selection of not only OEM products but also external saddle bags can be expanded to a large size. If you are having trouble choosing and installing a saddle bag because of the blinker, we recommend this kit. View detail
MT-09Tracer (15') Can be mounted on
Y's Gear is compatible with the MT-09 Tracer 900 or later, but the MT-09 Tracer (2015 model) I was able to install it without any problems at all in (from reliable sources) Case in point. (determined by the information of the). Fog Lamp of the specification product of PIAA is installed (it is pontooned to OptionHarness in Cowl, but it is high & hellip;), but the hole like Bolt hole is opened in Bracket, it seems that Other Brand Product may be attached depending on the device (self responsibility). As of now Camera of Drorecco has been installed in Mounting Bolt of Fog Lamp, inserting the Bracket of the letter L in between. View detail
Generally, I'm happy with it too …
I think it's a bit expensive! (Laughs)
The texture is also Matte-like, and although the colors are all available, it's a bit of a mystery to me hellip; …
I am satisfied with the overall quality of the product as it is made by the Manufacturer
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
Is good
Can be installed without modification
The Blinker no longer interferes with the side bag, making it easier to use
You'll have to work on the Fender inside out, which can be a bit of a challenge if you're on your own
As others have noted in their imprints, the Instruction Manual has little to say about There is no written procedure, so that's my complaint
View detail
Contributing to Dress-up.
Purchased from OEM's Silver ring for Makeover. HeadlightBody is shiny Black, why Ring Matte Black. Also high price. But there are no other choices. View detail
Take - - - -
OEM Parts So it can not be helped?
If you buy a bolt, the first thing you do not do is to paint Black in the cheap Silver Painting part.
And then crushing Plating.
Among them, the visual effect is amazing because it is the largest Large Plating parts.
However, it is expensive.
It is high monster.
Because OEM has rusted itself, I can not help it without it,
Even if I paint to Plating, it will be peeled so it can not be helped I purchased it with implications.
Every time I saw the car body by replacing the parts, it was okay with this and further suggestion that it was good
I am mad.
Oh, I want to exchange it with Seat of CSpecifications.
View detail
Matte Black
Headlight Ring of the original OEM was exchanged for this Ring because the quality of Plating was poor and the inside was rusted within six months from the time of new car.
As expected, texture is good as Matte black paint film as OEMO option goods. Light case is glossy black, so if you want greed, it was better for one who had gloss with one glance but it is satisfying because this feeling became Classic like this privately.
I did not have much difficulty in installation, but since optical axis adjustment Bolt sandwiched Spring with Plus screw, I think it would be better to loosen and tighten by pushing carefully while pushing my head carefully as it is hard for Small Driver. Do not forget to adjust the optical axis when tightening.
I think that it is expensive to have more than 8,000 yen in the Headlight Ring, but if you would like to change the image of the face with glitter, I think that it is a satisfactory product.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
Not too bad. It is satisfactory for attachment or the product in particular itself. When attaching by oneself, in order to work Rear fender outside carrying out, it was fairly serious, but the blog etc. were made by referring to it. [ ] Since
Not too bad.
It is satisfactory for attachment or the product in particular itself.
When attaching by oneself, in order to work Rear fender outside carrying out, it was fairly serious, but the blog etc. were made by referring to it. [
]
Since only the thing of the grade which removes a Blinker and it attaches to a Stay is written to the
operation manual, it thinks that the point is unkind and reduces one *.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
About DragStar 400 STD, Since the blinker is attached to the sidearm supporting a rear fender as compared with CLASSIC, While it had been pure, the fixing position of the side bag was limited (front slippage), and since the saddle bag interfered i
About DragStar 400 STD,
Since the blinker is attached to the sidearm supporting a rear fender as compared with CLASSIC,
While it had been pure, the fixing position of the side bag was limited (front slippage), and since the saddle bag interfered in the rear step or obstacles -- a fellow passenger becomes difficult to ride -- occurred, it decided to attach the rear blinker stay made from Y'S GEAR.
Although the attachment itself must perform removal of a sidearm etc. for the move of a blinker, if it is for about 1 hour, I will think that work is possible enough.
I think that the fellow passenger's degree of comfort also became good since change (it is not also a conspicuous degree) of the appearance by the position changing of a blinker and the attachment to the appropriate position of a side bag were attained as attached comment.
However, if it thinks only from processing of a griddle in construction material, since it is somewhat expensive, it is considered as four stars.
View detail