Reviews
Warmth comes from the hips.
I was so impressed with the MULTISTRADA 1000DS HeaterSeat that I had test-driven before that I decided to install it on my car.
Because it is a Yamaha OEM, installation is extremely easy. The connector on the car body side is also pre-wired for exclusive use, so the setup was completed just by connecting the two.
The STD one was thicker and I had no complaints, but the new one, which is called "Comfort," is even firmer and more comfortable.
Of course, sitting continuously for long periods of time, coupled with an upright riding position, will cause pain, but it will certainly reduce that pain.
The heat function was at a level where I could finally feel the effects of the heat when the output was set to max. I'm not sure if the skin on Small's butt is too thick, but I couldn't get a "wow!
However, this is going to be a tough season for Rider, and the benefit of having the Heat function is expected to be Large.
The Seat thickness has been increased, so there is a change in the footing level. If you can tolerate this, it would be a good choice for a long-distance companion.
In addition to the Engine and Lamp, recent vehicles have more and more items that consume power, so we need to manage the battery properly.
View detail
TENERE700RALLY50Seat
The seat height is 2cm higher than the normal seat, but it is slimmer than the normal seat, and the footing is not so different.
However, it is harder than the Normal seat, so the Normal seat is preferable for long-distance touring.
Will high seat also fit in if used?
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
In SingleSpec.
Purchased because the Tandem seat had become dirty.
Parenthesis is better, but in terms of quality, it is weak against UV rays and the color peels off. It also feels brittle for the price.
I would be satisfied if the price was lower, but I guess Motorcycle supplies seems a little less cosmetic.
View detail
It's handy to just put it on, but...
I love it on my Axial Treat, my commuter SPECIAL Knife, it's cheaper than buying a Tucker and reupholstering it, and it feels right. The only downside, however, is that it was stolen. I was on my way home and had to leave my bike for 15 minutes and the seat cover was taken? It's probably a Small Monk's Prank, which is frustrating. But it's better than being cut up by Knife, I'm sorry. I have to order the same one again. View detail
Comfort Seat
After installing the seat. I realize have missing part. Im searching in the entire box and buble wrap, but still cant find it. What should i do? View detail
It suits me well
I purchased this with a period Point I installed it with the image of pulling it from the front side to the back It is a special product for Y's Gear's MAJESTYs, not a cheap Seat cover I think it suits the body of Mad Titanium very well
But is there just some air in the seating position? The seating position is hollow and bulging However, this may become accustomed to it as you sit on it I rode it for a little while, but I felt a little bit of stiffness of MAJESTYs It seems to have been reduced by only one thing (Maybe it's just how I feel) Also, there is a Wrinkle in a few places, but it takes time It looks like it will disappear over time, so I'll ride it as it is
View detail
Not bad, but
Even though the surface texture does not go to Paper File rather than I thought it was quite rough.
Because I have a Seat high when riding with Suit etc. I think that it rubs when getting on and off and the fabrics of Pants hurt.
People who do not mind may not be interested because I have a lot of opportunities to get on work...
View detail
Fits: YAMAHA MT-03, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT-25
OEM Product? (Lol)
At the time of installation, locking did not start well at first, trial and error did. I thought it was a defective item and contact Y'sGEAR. I corresponded politely.
As a result, hang is necessary for installation, and it turns out that it will be difficult to lock if it does not go well.
It was a relief as it got along well, but how about OEM Product ?,,, ( - - ;)
It is ◎ that the documents were put under the Cover and closed with the on-board tool included
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA XT250X, YAMAHA XT250X, YAMAHA XT250X
I think it is a good Seat for improving pain and position improvement.
With OEMSeat, because Seat high is low, Positioning is cramped, the burden on the knee is Large, I got tired at long distance Touring, so I bought a 3 cmUP Touring seat.
Positioning has become easier even when the knee stretches and runs for a long distance as Seat became high. I also thought that pain was much easier to buy compared to OEMSeat, but the gap between Tank and Seat is Large, Color is SIDE's Gray does not mind, Rain and other epidermal We are considering reloading so as to penetrate from the seams.
View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino
The sheet became new and felt it refreshed. Since it had a form of a beautiful sheet, the whole sheet was imagined and purchased, but a photograph is a thing only with a seat cover and I somewhat regretted it. However, since a function is together
The sheet became new and felt it refreshed.
Since it had a form of a beautiful sheet, the whole sheet was imagined and purchased, but a photograph is a thing only with a seat cover and I somewhat regretted it.
However, since a function is together if a cover is changed, it is satisfied.
I think that the difference between a seat cover and a sheet should be put up in detail since the image of a goods printing photograph is unclear.
View detail