Reviews
this is really good
It's really easy to install and the wiring is neatly finished.
It is more expensive than an external product, but it is very convenient because it does not require additional buttons and is displayed intuitively on the instrument panel.
Since it can be adjusted up to 10 levels, I am very satisfied because I can adjust it appropriately --------------------------------- ------------------------- The mounting is really comfortable and the wiring is finished neatly It's more expensive than outside, but it doesn't need additional buttons , but it's really comfortable because it is intuitively displayed in the instrument panel. It can be adjusted up to 10 stages, so you can adjust it properly. Powered by Google Translator
View detail
Mounted on YB125
I bought it because of the cold weather.
I can't help but feel like an old lady when I look at it, My fingertips are too cold to hold Clutch." What a relief!
Instruction ManualThe installation was easy, although there is no manual.
Blinker operation is also fine.
View detail
Installation on Other Brand ProductHandlebar
I used to be a Grip warmer nay-sayer and used winter gloves that were as thin as possible or that didn't change the feel when I held them, but after touring last year, I realized that I would have to rely on electric heat this winter because it was so cold.
I was worried that I would have to replace the grips when they wore out, but since I was driving less, I decided to install Y's Gear's OEM grips warmer.
When I ordered the Grip warmer, it says that it cannot be used with the OEM hand guard because our MT-09SP is a 2021 model, and the Grip warmer part numbers seem to be different.
In this case, we are going to use the quantity of the product to be attached to the made by HURRICANESwallow handle of Other Brand Product.:Pair (for Left and Right) I was fine with either one, but I ordered the one that cannot be used in conjunction with OEMHand guard.
Installation was as easy as connecting to the Coupler provided by OEMOption.
*The work to remove the Left SideGrip in the preliminary preparation was the most Large strange.
Grip size seems to be the same as OEM, but we had replaced it with Domino Grip and it was a little sticky, but we got used to it.
The performance of the Warmer was perfect, and I found it to be a reassuring piece of equipment not only in winter, but also in April and May, when my hands would get cold if I used thin gloves.
However, there is no need for 10 temperature settings, even though the OEMSwitch is difficult to control, and 5 settings are sufficient.
This time it was installed on Other Brand ProductHandlebar, but the grip length was perfect because it is a special product drilled exclusively for MT-09, and ZETA hand guard was installed on the bar end, but it could be installed without touching the throttle. The ZETA hand guard was also installed on the bar end, but it did not touch the throttle.
At first, we hesitated to go with the less expensive DAYTONA product, but we chose the OEM product because it can be operated from the OEMSwitch, the operating status is displayed on the meter, the coupler for connection is provided on the car body, and the Axel side has a throttle pipe for easy replacement. The Axel side has a Throttle pipe and is easy to replace.
Considering the fact that the entire grips will be replaced when they run low, it would be helpful if the GripSingle Item were a little less expensive.
At the moment I am thinking of returning to normal Grip for the summer, but I am not sure if I can remove the Left SideGrip since I have attached it firmly with Cemedine SUPERX as specified.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA MT-09 SP
I am glad I installed it!
Installed on a 2022 MT-10SP. All that is needed is the designated Grease (YAMAHAGreaseB), Cemedine X, and Parts cleaner.
On the Left Side, remove the NORMAL Grip end and Grip, apply Cemedine X according to the Instruction Manual, spray the inside with Parts Cleaner, and quickly press it in before it dries, as Parts Cleaner acts as a volatile lubricant, The parts cleaner acts as a volatile lubricant, so it is necessary to do this quickly. It is best to align the direction of the cords to some extent before pushing them in.
The Right Side is simply replaced with a NORMAL ThrottleGrip, so there is no gluing required here, so it is easy. Apply grease to the designated areas and assemble. Note that some commercially available grease may damage the resin, so OEM grease is the safest choice. In particular, since this is the part of the throttle, we do not want the throttle to return due to deformation and deterioration of the resin, so careful judgment is required.
The cord is attached according to the instructions in the Instruction Manual, and after temporary attachment, the handlebar is adjusted to the quantity.:Pair (for Left and Right) Move it to the most LARGE to make sure there is no interference and fix it firmly in place. It will take about one hour if you do it slowly. The length of the cord is extremely long, so it must be distributed in a balanced manner.
When installed on MT-10, you can operate it within the Meter, but you can arbitrarily assign 1 to 10 Levels to the 3-positions of LOW, MID, and HIGH in the Pre-set. I set 3 for LOW, 5 for MID, and 10 for HIGH, and it was sufficient at high speed in MID at about 5 degrees Celsius. Also, even if I turn off the Ignition, it remembers the previous state (ON, OFF state and LOW/MID/HIGH) when it is turned on next time, so there is no stress. The operation itself can be easily operated with the Handlebar SwitchRight Dial.
The price is high, but I am glad I bought this product.
The grip diameter is the same as that of the NORMAL, so there is no sense of discomfort when gripping it.
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA CELLOW 225, YAMAHA CELLOW 225, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA tricker
This is for Yamaha cars
This is a product that has remained unchanged since it was standard equipment on the DT200R in 1988. I grip the end of the grip, so I don't like the type of guard that is fixed to the end of the grip, and I think this is the best for windproofing. View detail
Very nice OEM quality
The tips are a perfect fit...and casually in the same color as my whells. Manufacturing is high quality ( unlike some chinese copies in the Internet) and it adds value to the Nmax. I'm very pleased! View detail
Fits: YAMAHA BJ50, YAMAHA BW'S, YAMAHA BW'S, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA Mateseries, YAMAHA AXISTREET, YAMAHA VOX, YAMAHA VINOMolar feh, YAMAHA VINO(4-StrokeXC50), YAMAHA VINO(2-StokeYJ50R), YAMAHA MAJESTY125, YAMAHA JOGAPRIO, YAMAHA JOGPOSHE, YAMAHA JOG(4-StrokeCE50), YAMAHA JOG, YAMAHA GRANDAXIS100, YAMAHA GEAR(2-StokeBA50NH, YAMAHA GEAR(4-StrokeBX50)
It is easy to install. and it will protect you properly.
It is easy to install. View detail
Y's Gear
The design is sturdy and well constructed. View detail
Fits: YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Only one side.
Quantity in product image:Pair (for Left and Right) Who might think that?
(I was the one lol).
Upon arrival, I rushed out to purchase another one.
The quality of the product is solid, as is the OEM quality of the product.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA MT-09 SP
I had a Grip heater installed at YSP Shonan and they were very kind and courteous.
I haven't tried it yet, but there is a possibility that I will use it during my trip to Noto since I leave at sunrise on the SSTR, so I think I will be comfortable at that time. View detail
As expected from an OEM...perfect workmanship!
The new MT-09 has a power coupler for the grip warmer, so it's very easy to replace the grips and connect them. It is just as good as the Standard Equipment. The only thing that hurts is that the price is double that of the previous model, the Grip warmer! View detail
Fits: YAMAHA NMAX 155, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY
Very easy to use
My motorcycle is YAMAHA XMAX300. The cold winter is coming. In this season, no matter how thick gloves you wear, you will feel cold in your fingers. I saw this YAMAHA original heating handle on webike. This handle is suitable for various models of Yamaha and is equipped with the original power interface. It is a little troublesome to install and need to remove many covering parts on the motorcycle. View detail
Can't get through the winter without it.
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Same as in the photo
Was the installation difficult?
It is not that difficult to use the OEM's Coupler because it is available.
The Instruction Manual is also well written, so there is no problem if you read it and proceed.
How was your experience with it?
The good thing about this product is that the OEM's Meter screen shows ON/OFF of Grip heater and
Where the current temperature control comes out.
In addition, there is no need to wear an extra Switch because it can be operated with the Handlebar Switch.
The best thing is that the Grip diameter is the same size as the OEM, so there is no discomfort at all.
The grip is completely comfortable, and I have no complaints even on long distance touring.
Warm enough to never touch with bare hands, low temperature burns, or rather, burns!
[Was there anything that disappointed you?
My only complaint is that the Y's Gear hand guard cannot be installed when this HeatGrip is installed.
I found out that when the Grip heater is installed, the shape of the Axel side Bar End changes.
Hand guard using OEMBar End cannot be used.
The OEM Bar End has one tier, while the Option-supplied Bar End has two tiers.
Looking at Axel from the side, it is indeed with Stages....
And the saddest thing is that it will be possible to install the Bar End in the middle of the 2022 MODEL without changing it.
Now the Hand guard can be fitted at the same time.
Another point, it doesn't have to be adjustable in 10 steps.
Quantity to so much severe while traveling:It is a hassle to Set.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Bar End should be able to be installed without modification.
View detail
Essential in winter
In winter riding, thick gloves are only half the job. The most important thing is to keep out the cold wind. This original YAMAHA hand guard is excellent for keeping out cold winds, exquisite workmanship and easy to install View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX
Items high on the priority list for those in cold regions.
Motorcycle is in hibernation due to snowfall in our area during the winter months. Therefore, I use it for early winter and spring. When I go to the mountains, the temperature drops rapidly, so the Large size is very helpful. I use it when the outside temperature is around 12℃.
I asked my favorite Motorcycle shop to install it. I envy those who can do it by themselves.
On the other hand, for motorcycle shops, there are sales in various aspects such as motorcycle body sales, vehicle inspection labor charges, insurance agency fees, product sales, and installation labor charges.
I like that the Indicator is Blue, because I am not good at distinguishing between RedGreen and RedGreen. I am not good at distinguishing between RedGreen and Blue. I had it mounted on the Left Mirror for installation. I had the Indicator mounted on the Left Mirror, but then I put the Smartphone Holder in front of it, which made it a little hard to see.
The thickness of the grip is no different than before I changed it, but the grip is gradually becoming slippery. I have been wearing leather gloves for 3Season and synthetic leather gloves since late fall, but synthetic leather gloves became too slippery to operate. This has led me to purchase leather gloves for winter use. I wish the manufacturer would consider more about the material and durability of this surface.
Overall, I am Large satisfied. It is a little pricey, but I am glad I didn't buy a cheap one.
View detail
hands are not cold in winter
My motorcycle YAMAHA NMAX155, in the cold winter, no matter how thick the gloves are, they can’t resist the cold wind blowing for a long time, and the hands will feel cold. The original YAMAHA care worker I bought on webike can block the cold wind very well, so that Keep your hands warm, the original accessories are easy to install, beautiful in design and easy to use. -------------------------------------------------- -------- My motorcycle Yamaha Nmax155, in the cold winter, can not resist the cold wind for a long time, no matter how thick the gloves are, it will feel very cold. The original Yamaha original caregiver I buy on Webike can block the cold wind and let the cold wind make it very good. Keep the temperature on the hand, the original accessories are easy to install and have a beautiful design and easy to use. Powered by Google Translator View detail
Exquisite Balanced Terminals
My motorcycle is YAMAHA NMAX155. The original balance terminal of this car is made of plastic, which is very cheap, so I bought this original YAMAHA balance terminal on webike. It is made of all aluminum and has hexagon socket screws. It is firmly fixed on the handlebar, and the overall feeling is very beautiful after loading, and the handlebar is more balanced during riding. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The balanced terminal of this car was made of plastic and is full of cheapness, so I bought this Yamaha original balance terminal on Webike. It is steadily fixed on the handle. loading the car, it feels very beautiful, and the ride on the car handle is more balanced. Powered by Google Translator View detail
exquisite accessories
My motorcycle is YAMAHA NMAX155. The brake lever of NMAX155 motorcycle is a little hard, and it feels bad when pinched. I bought this original brake lever set on webike. The lever is made of aluminum alloy and has an adjustable function. You can adjust the grip of the lever according to your own hand shape. The installation is very easy, only need to remove one screw to install perfectly. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155, the brake lever of the motorcycle of NMAX155 is a bit hard, and it feels bad to pinch. I bought this original brake lever set on Webike. The lever is made of aluminum alloy and has the adjustable function. I can adjust the grip of the tie rod according to my own hand shape. The installation is very easy, and you only need to remove a screw to be perfectly installed. Powered by Google Translator View detail
Fits: YAMAHA NMAX 155, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY
winter helper
My motorcycle is YAMAHA XMAX300, and the cold winter is coming. No matter how thick gloves you wear when riding this season, your fingers will feel cold. I saw this original YAMAHA heated handlebar on webike. This handlebar is suitable for various models of Yamaha and is equipped with the original factory power connector. The installation is a little troublesome and requires the removal of many covering parts on the motorcycle. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300, and the cold winter is coming. No matter how thick gloves are wearing this season, your fingers will feel cold. I saw this Yamaha's original heating handle on Webike. This handlebar is suitable for various models suitable for Yamaha and equipped with the original power interface. The installation is slightly troublesome to remove many coverage parts on the motorcycle. Powered by Google Translator View detail
Knuckle guard by Y's Gear to keep up with the unique face
I did not intend to install the Knuckle guard when I first purchased the bike, but when I looked at the images of various New Model MT-09s posted on the web, I got used to seeing them, and I began to think that a Knuckle guard might be a good idea because of the unique face. I was also delusional that the guard might generate DownForce when driving at high speeds, so I installed it as a trial.
However, in our case, the handlebar had been replaced with an Other Brand Product for the old MT-09, so it took some time to change the handlebar back to the OEM handlebar. In our case, the handlebar had been replaced with an Other Brand Product for the old MT-09.
As for impressions after installation, I am quite pleased with the appearance, although I do not think it will be of much help since it is a matter of personal preference.
As for the actual effect, the inside of the Gloves may get stuffy in the summer since the wind is not blowing directly onto the hands.
On the other hand, when traveling long distances on highways, Bypass, etc., I felt that fatigue was considerably reduced compared to before.
However, I had installed an EFFEX Handlebar and their Handlebar weight as a countermeasure for Handlebar vibration, but when I returned to the OEM Handlebar to install the Knuckle guard this time, my hand felt a little shaky when I came home from a touring of about 400 km. I am now considering whether or not I can take measures like handlebar weight with this Knuckle guard installed.
And the most interesting point is that the brake master is fixed to the OEM Nisshin master cylinder, so if the master cylinder is replaced with another brand product such as brembo, it may be necessary to make some adjustments to fix the master cylinder. If you have replaced the master cylinder with another brand product, such as brembo, you may need to make some adjustments to fix the master cylinder.
In the case of *SP, there is also the issue of Cruise Control, so I would like to try various things when the Brembo master I have already ordered arrives.
View detail