Reviews
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX
It's pretty warm
Installed on TouringSEROW.
Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it all together nicely, even though it was a bit of a puzzle.
When I was checking for any abnormalities at the end, to my surprise, Axel's rotation was stuck!
Apparently, the grips were longer than the OEM grips, and the grips were interfering with the handlebar attachment point on the TouringSEROW equipped hand guard.
It's got a corn expander, but...
There is no choice but to use WasherQuantity between Hand guard and Cone Expander.:1 Set of 2pc. was found and resolved successfully!
The actual Heater, as seen in the previous reviews, is quite warm, and Level 1 of 3 levels is about enough.
We are in a snowy area and don't ride in the winter, so it will be useful in early spring or late fall.
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA CELLOW 225, YAMAHA CELLOW 225, YAMAHA Cerro 250, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X
This is good.
Installed on Yamaha ST225 BRONCO.
Installation is a snap!
I installed it and promptly tipped it over.
In the middle of the scrub, he was knocked off his feet by the incline and fell to the ground.
I was dug into the ground where the leaves were piled up.
It did not break and was safe. It also seemed to protect my hands.
I think it's a good price point.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
The quality of the exterior is poor.
[How is it used?
I bought a new CYGNUS X SR5 model for my commuter car and purchased this adapter to replace the mirror.
With this Adapter in place, I am using a Baren classic, Black color, from Tanax Napoleon Mirror.
Was the one you received as per Image?
Although it was as per Image... I thought it would be in the Blister pack like Tanax.
It came in a Petit bag, just like normal OEM Parts. I don't mind this, but...
The Adapter clashed with each other inside the bag, and became covered with scratches.... Or rather, the texture of the product is rather rough to begin with.
Please refer to the pictures.
Was the installation difficult?
For CYGNUS X, the Right Side is Opposite Thread Screw, so be careful.
Turn counterclockwise for Left and clockwise for Right to loosen. Also, the screw on the recessed side of the Adapter is an M10 Opposite Thread Screw.
The Mirror side also needs to be an Opposite Thread Screw.
How was your experience with it?
It fulfills the function itself, which is nice. The height isn't too high or too low.
BAREN classicMirror is a nice addition to the collection.
[Included Parts:were they on?
No, I don't! Tanax's Adapter came with a Washer, I believe.
I wish this came with it.
[Was there anything that disappointed you?
After all, is it the texture part? It's not a problem when it comes to function, but
This is a part that you will see all the time when you ride your motorcycle, so I hope you will pay attention to it.
To be honest, Tanax's Adapter has a beautiful Black Painting, so if you care about the appearance
We recommend Tanax.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
I'm buying a refill.
I bought another ZETA SX3 bar for my wife's Course-only WR250X.
The OEM quality, lightweight and sturdy construction is Race ish without any waste.
The look is the same as the OEM, and the height and mounting position can be changed to Taper Bar without changing the OEM.
View detail
Fits: YAMAHA TT-R125LW, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R125LW
Is it as small as you think?
[How is it used?
I am using it on a SEROW 225.
I've taken care of you a few times. w
Was the one you received as per Image?
The outside was as Image, I'm glad it has an OEM look.
The Sponge is a bit smaller than I expected. I thought it was a bit smaller than I expected.
Was the installation difficult?
It's a Universal Product, so it can't be helped, but the width is a little too wide and it interferes with the product.
The Pipe Handlebar I have installed now is Other Brand Product, I don't know if it's OEM or not.
Quantity:Pair (for Left and Right) was cut out and attached to the equal etc.
How was your experience with it?
I've taken care of you a few times. w (2nd time)
I made a mistake on the way down and hit my chin and chest. The Sponge seems to be working just fine!
To think I didn't have it on...
[Included Parts:were they on?
It came with a Sticker!
[Was there anything that disappointed you?
The Sponge is a bit chunky looking, but the performance is fine!
Therefore, no problem!
Other items that would be helpful
Installation Point or hang
If the width is too wide and jammed, you can adjust it with Scissors.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Upper clamp has a HandlebarSetting scale
I also put this one of Y's Gear on my wife's WR250X for Course.
I used to use the upper clamp with zetasxStabilizer, but Y's Gear's upper clamp has HandlebarSetting scale, so I used Y's Gear's clamp for both upper and lower to save weight and to install Bar pad. The Y's Gear upper clamp has a handlebar setting scale.
I like the simplicity of the design, and I like the HandlebarSetting too.
View detail
Fits: YAMAHA TT-R125LW, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R125LW
It's still not very durable.
Design and the North American YamahaGYTRBrand are cool items.
It also comes with a GYTRSticker as an added bonus.
Best
But the durability is not good. It should be replaced in 6 months to 1 year.
It's time to replace our Bar pad.
Webig has them in stock, which is great.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
It's cheaper than buying from Single Item.
I chose this in order to install the Taper Bar of YZ250FX to my wife's Course running exclusive vehicle WR250X 2009.
It is thought to be the same Parts as the Handlebar Clamp of 2006 YZ250, but this Quantity:Set is a good deal.
I have not installed it yet so I don't know the details, but I will give a detailed impression again after installation.
It is clear that the design, color, and position of the OEM WR250XR and Handlebar Clamp do not change when using these parts, and the upper clamp has a unique YZracer Handle positionCenter mark. It is very convenient.
Because the clamp of Other Brand Product changes the position, I have been avoiding Taper Bar until now, but with this, I will introduce this to my 2007 WR250X without hesitation and install YZracer Handlebar.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX
Here are my thoughts on the installation
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!
This time, it was installed in SEROW250!
The most difficult part is to take out the Connector which connects Wiring and put it back in the original position.
this [Color] If you can clear it, the rest is easy.
View detail
Fits: YAMAHA TT-R125LW, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R125LW
OEM Product.
I bought a long pad and I had to cut both sides of the pad because it was too long. The pad material is not urethane but foam, so the price is reasonable. View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA CELLOW 225, YAMAHA CELLOW 225, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA tricker
It looks great on Yamaha's older Off motorcycles.
[How is it used?
I installed it on my 1998 SEROW225WE, which is a city driving Main.
Was the one you received as per Image?
Just like the image!
This is a product that was already on the market before I started riding motorcycles, and it looks great on older Off-road motorcycles.
Was the installation difficult?
The Clutch Side will not come on unless you replace the Lever holder for this product (it is included).
How was your experience with it?
The body is made of ABS plastic and there is no core rod, so the protection of the fingers against contact with obstacles and falls is weak. "Windbreak." Ya "Protection from weeds and thin branches." It is a degree.
But it would look great on an old Yamaha type Off car!
[Included Parts:were they on?
In addition to the body, the Clutch Side for ReplacementHolder and Bolt & Nut are included for installation.
[Was there anything that disappointed you?
I bought this product knowing the MeritDemerit of this product and I have not been disappointed.
If you're thinking of buying, see above. How was your experience with it? column and compare it with the actual purpose of use to make a decision.
Other items that would be helpful
Point and hang of installation
Although it is simple, I think that it can be installed without a problem if you are able to do beginner level maintenance because the Instruction Manual with the installation diagram is attached (If you are not confident, please leave it to PRO).
[Availability and clarity of the Instruction Manual
As mentioned above, there is an Instruction Manual available, and if you take your time and don't panic, you'll be able to tackle Large (please leave it to the PRO if you're not confident).
[Notes]
Don't compare it to a sturdy Guard with a core! Above. How was your experience with it? Since it is as described in the section "To keep you warm in the winter." "Fashion as a thing of the time." (I'm installing it 100% for Fashion purposes).
[ITEMS TO BUY TOGETHER
None in particular.
[Opinions and requests to Manufacturer
As of 2021, Yamaha's off-road motorcycles are no longer available, but please keep this product in your line up for as long as possible (as it will inevitably deteriorate due to UV rays, etc., and you will miss it when you replace it next time).
View detail
Fits: YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
After all, OEM.
I had the OEM compatible one on, but I really wanted the OEM Mirror, so I bought it.
I'm embarrassed to say that OEM has good visibility and parenthesis design… I'm reaffirming it now (lol)
good point
Visibility is excellent. It's really easy to see.
It is much stronger than compatible products. The durability is sure.
The shape is really beautiful, if you want to make it CafeSpec. it might not look good, but if you want to make it NORMAL or Handlebar Up TypeSpec. it looks best.
It's cheaper than I thought.
A bad point
I can't find it.
The current customization trend is to go back to OEM, so there are a lot of times when I realize the advantages of OEMParts.
And I think that SR is a very popular motorcycle.
This Mirror is a Recommendation, if anyone has a replacement from the OEM Mirror, you should keep it and not give it away.
View detail
Fits: YAMAHA YB-1, YAMAHA TW200, YAMAHA TT250R, YAMAHA SR125, YAMAHA DT50, YAMAHA DT200WR, YAMAHA DT125R, YAMAHA TT250R RAID, YAMAHA YB-1, YAMAHA TT250R, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA BRONCO, YAMAHA TY250Z TY250, YAMAHA DT230 LANZA (DT230)
I know, but OEMMirror is easy to see.
The one that came with it originally was an Other Brand Product, and the visibility was poor and unbearable, so I went OEM.
good point
Visibility is excellent.
It's sturdy. High durability.
It is cheaper than outside.
It is best to keep it because it can be used for other models by the same manufacturer.
A bad point
There is no dress-up effect. On the contrary, I think it is good for Parenthesis.
The Mirror is a decorative element, but originally it was a large cut-out part for checking the rear.
I think you should choose the one with the best visibility.
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA CELLOW 225, YAMAHA CELLOW 225, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA tricker
alleviation of cold
The Size is also there and windproof and reduces the coldness of the hands in winter.
However, because of the soft material, I do not expect much protection, and I do not think that it will be able to protect the hand and prevent lever breakage in the forest road and Attack system. I feel that I can prevent it if it is a summer insect Attack at best.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Exquisite Round is the best!
This Lever has been bothering me for a long time now, but I finally introduced it. The Round shape of the Lever is very different from other companies' products. Although it is Rounded forward quite drastically, thanks to this shape, it becomes possible to pull the brake instead of gripping it with only the first joint of the finger at the input of the smallest limit, and delicate brake operation can be easily performed even during intense Body Action. As expected of Y's Gear. View detail
Fits: YAMAHA TT-R125LW, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R125LW
This is what YamahaMotorcycle is all about!
I'm using it on my 2007 wr250X, and although the Sponge deteriorates quickly, the price is reasonable and the one-of-a-kind design is already great! You can ride your motorcycle like a Yamaha WorkSlider! View detail
Fits: YAMAHA XSR700, YAMAHA Tricity155, YAMAHA TRICITY155, YAMAHA TRICITY155, YAMAHA TRICITY155, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09
Power that is too hot
[How is it used?
I have a BirdCity125ABS with the Handlebar Cover in the winter.
Thin gloves are required to ensure maneuverability.
The combination of Handlebar Cover and Grip heater (COTA ツ) was reputed to be the best.
I installed the Grip heater this time.
Was the one you received as per Image?
As you can see in the image, it is as thick as a normal Grip and I am very happy with the Large!
Was the installation difficult?
I was worried that even I, a Custom beginner, would be able to do it.
I watched a few installation videos on Youtube and it looked like I could do it, so I did the Challenge!
Removing the existing grip was also surprisingly easy.
There was nothing difficult about fitting and wiring (just SnapSnap and fit).
It looks like a smaller amount of Grip bond would be good.
As a result, I was able to install it without any problems!
How was your experience with it?
It's already too hot for the three levels of high, so I recommend using it on medium or low.
[Included Parts:were they on?
Harness and Bond need to be prepared separately.
[Was there anything that disappointed you?
Not just as expected, but more than expected.
Other items that would be helpful
Watch the installation video on Youtube, it's easy!
Harness varies depending on the model and year, so it is better to check beforehand.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA XJR1300, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX, YAMAHA WR250RX
Add hot items
Although the technology is a beginner, it is very easy to install and has excellent performance. It's not uncomfortable off-road, it's not broken. I think it's the right quality for the price. View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Handguards
Handguards are excellent. They arrive earlier than expected. It fits nicely to my bike. I installed immediately after receiving the item. View detail
Fits: YAMAHA TT-R125LW, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R90, YAMAHA TT-R125LW, YAMAHA TT-R125LW
Yamaha has YamahaOEM
This Bar pad is a must have item for any Yamaha rider. We are ordering another one. The quality of the Sponge inside is cheaper than the zeta, but it doesn't matter. View detail