Reviews
Low volume, turn it and it's creepy!
When I ran the car right after installation, it was so quiet and boring that I immediately ordered an Exhaust System from Wills WIN!
Wills WIN sounded LARGER, but I was dissatisfied with the way it ran, so I ended up going back to BEAMS.
When I replaced the inexpensive WILLS WIN, I could see the difference in performance and I thought it was a good exhaust system again.
I cannot feel the difference of smoothness as much as YOSHIMURA, but it advances more firmly than the cheap exhaust system which only has a big sound!
I now like the sound of the engine braking after high rpm rotation. (^^)
By the way, I also got this one at Outlet of WeBig for about 36,000 yen,..,
WeBig is God.
View detail
Crafting accuracy is too poor.
I bought a Semi-racing baffle to see if it would be a change of pace.
The original Baffle fits perfectly, but I had no trouble removing and installing it.
Of course, there is no chattering sound that occurs when the diameter is not matched.
When we tried to replace it with this item, the Edge was still there when it was cut from the base material Pipe, and it was wider than the original bore diameter.
(similar to the situation where a simple cut of the Hose in Scissors will not result in a horizontal cross section).
I forced it into place by knocking it in with a Hammer.
The Size is different from the original caliber.
It still makes a shrieking sound and is not worth the price.
(It was my fault for forcing it in, but I also had a hard time removing it.)
Drop the Edge in Grinder to get closer to the original caliber.
For the time being, we made it easier to remove and install, but did not eliminate the chattering sound when AxelOff is turned on.
I don't think it is the original sound.
I was disappointed, although it was a Manufacturer that I liked because of its hard-edged design.
Even if the product was defective, it would be at the point of shipping visually recognizable Level products.
I felt that they were not a trustworthy Manufacturer.
View detail
Sporty looks ◎Mild characteristics
Sporty looks ◎Mild characteristics
■ Design
The OEM exhaust pipes were black, but now they are stainless steel, and the silencer is titanium or yellow, so it looks like the exhaust system has been changed. The silencer is also in Titanium or Yellow color, so it looks as if the exhaust system has been changed.
■Weight
Exhaust pipe is stainless steel, so it is a little heavier, but overall it is almost 3 kg lighter than OEM and less than half the weight. I thought I wouldn't notice it while driving, but there is a noticeable change when cornering, perhaps because the lunch box is gone. The center of gravity must have changed.
Mounting
OEMPillion Bar is OK, so if you are changing from OEM Exhaust System, you can install it as it is. One blog says to remove the rubber parts attached to the screw hole that holds the silencer band, but do not do that because it will rattle the screw and loosen it. The old Gasket was removed by pulling the protruding part with pliers, which spread out like a spiral.
Sound quality
I thought it was only 4db louder than OEM, but it is 1.6 times louder in sound pressure, so I feel it is louder. I think it is quieter than YOSHIMURA's R-77S, but considering the neighborhood, I think this one is a little quieter.
I thought the sound would not be that loud since it is JMCA, but when I rev it to high rpm, the sound is so loud that I cannot hear anything around me. It sounds more like ba-ba-ba than ba-ba-ba.
Performance
I have tried to test the results of this Exhaust System with KOSO Air cleaner + Air duct removal + IntakeInner duct removal after 100km of driving after ECUReset. I feel that the overall Torque is slightly improved, but it is not that much different from the OEM power curve. If I had to say something, I would say that the OEM's Torque dropped from around 6500 rpm, but now it stays up to around 7500 rpm. However, it is obvious that the fuel is thin, so it would be better to consider the introduction of a sub-computer if you use high RPMs frequently.
■How to choose
If you want to buy a Titaniumium silencer Exhaust System with a little bit lower price, or if you like the looks of the Exhaust SystemSingle Body, it is a good Exhaust System, If you are looking for performance with the Exhaust SystemSingle Body, it would be more convincing to buy one from a Manufacturer that provides BenchData (whether it is really fast or not is not important).
Exhaust system with short tube length tends to sacrifice low speed Torque, and this exhaust system is not an exception. If you are a light tuned driver, you may be happier to choose a longer Exhaust System that does not sacrifice Torque.
However, since it is ultimately budget and preference rather than performance trends, it is best to choose an Exhaust System that you like.
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF
It is a good sound.
Installed on an '18 SB.
I was happy with the sound OEM,
SALE I was hit by a demon called "the
There is also an Instruction Manual for installation, so you won't get lost.
The Gas Inspection Report is also included.
As for the sound quality, I'm sure people have different opinions….
For me, the bass is clearly stronger than the OEM ratio,
It was very comfortable to listen to.
As for the volume, the bass is still strong.
I think it's getting Larger,
Frankly, I don't think there is any difference between OEM and Large.
Also, the sound changes when switching to VTEC,
You can hear it with Haddrill.
View detail
Fits: HONDA ADV160
Impressions after a little driving after Exhaust System replacement
About the product→The details are beautifully made. The welding etc. is very well done and I am very satisfied with it. However, I think the silencer should be a little bit larger to fit my car.
The sound→bass is very effective. When accelerating from a stoplight, I tend to open the Axel. The sound peculiar to single cylinder is comfortable. The normal running sound is not so different from the standard exhaust system.
Performance→ I feel that the overall acceleration performance has improved, although it is only a feeling. Smooth acceleration in all ranges feels standard?α.
View detail
Beams Front pipe
No Rust, Torque is a little more or less jerky than NORMAL. View detail
Fits: HONDA ADV160
Exhaust System replaced.
BEAMS Beams CORSA-EVO II Full Exhaust System has been installed. The color is SMB, but it doesn't look as black as it looks in the picture. View detail
Sounds good.
It's a government-recognized Exhaust System, yet it's fun to run.
The sound is nice too, a bit of a valley in the middle speed ^_^.
Maybe for high pre.
View detail
Enjoy your commute to work
Scooter's Stoto." The sound changed to a nice sound from
It made my commute more enjoyable.
I feel like I'm getting to 50km faster than I thought.
View detail
Great fit
2016 Yamaha Zuma USDM. Shipped fast, and the fit and finish was fantastic. The instructions are basically non-existent if you speak anything other than Japanese, but it's very easy to figure out. Install took less than 20 min. It's louder than stock, but not by much, but it sounds fantastic. View detail
Looks good.
[How is it used?
Was the one you received as per Image?
?Image Streets, Large Variant Beauty
Was the installation difficult?
?Easy to install.
Silencer mounting bracket positioning is a bit troublesome
How was your experience with it?
?Large Beauty
The sound is unexpectedly quiet.
[Included Parts:were they on?
?Gasket was also attached and helpful.
[Was there anything that disappointed you?
?The instruction manual is difficult to read because of the difference between the explanation and the page of the picture.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I think I like the sound of OEM better.
The design is great, and I like the solid color of Stainless because I don't like the burnt color of Titanium, which seems to be deliberate.
In this Class, the weight is almost the same in either case.
We could not tell the difference in driving performance with only 2 kg lighter and 1.5 horsepower more.
As for the sound, I preferred the OEM one, although it is a matter of personal preference.
The OEM model had a good multi-cylinder sound quality despite its small volume, perhaps because the end pipe was a Dual Silencer.
Although this one is more powerful. Duh duh duh. The sound quality has a pulsing feel and is very typical of a single cylinder.
However, I like it because the texture and design are top notch.
View detail
just right
I bought it because the SS400 I bought used did not have a Baffle.
It was quite loud and annoying without Baffle in it.
After adding Baffle, it is just right for me personally, not too loud and not too quiet.
I am also satisfied with the increase in low and mid speed Torque.
View detail
Beams SS400
Direct fit to my 2014 suzuki burgman 200. Metal used is top notch. Weldings are very clean just as i expected coming out of japan. I was looking to replace the stock pipe but i didnt want anything loud, this was it. Boxed very professionally. Happy customer here. View detail
Installed on CYGNUS X Type 5.
[How is it used?
I installed CYGNUS X5 type (2BJ-SED8J) for commuting.
Wbike's conformity only lists SEA5J, but on the Manufacturer's website, it has been Japan Government Certificated to fit the 2017 MODEL 2BJ-SED8J since September 2017 (Taiwan MODELNG) It seems that there is no problem as it was stated.
Was the one you received as per Image?
The OEM exhaust system was very protruding, not good looking, and I had to be careful when parking the bike against the wall.
Was the installation difficult?
It is quite easy, and if you are able to change the oil, you should be able to install it with no problem.
O2 Sensor should definitely work with the Coupler removed. It makes a difference in efficiency.
The Coupler is located in a fairly easy-to-remove place, so do not be sidetracked and remove the Coupler.
How was your experience with it?
First off, it's too OEM heavy and Beams too light! The handling is definitely lighter.
In addition to being lighter, the design is much closer to the chassis, so it feels lighter than it actually is.
On the other hand, since it is quite close to the body, it may interfere if an external Rear shock or a thick Shock is installed.
I'll post a picture for your reference.
Also, the exhaust pipe is designed in such a way that the filler cap can be properly removed.
[Included Parts:were they on?
Exhaust Gasket is included, but this is a tricky Gasket to remove next time.
Personally, I recommend YamahaOEM, although it is expensive.
Or if the Gasket you removed is still usable, you could reuse it.
[Was there anything that disappointed you?
Not that I'm disappointed, but the volume is LARGER than I expected!
The sound is not as loud as YOSHIMURA's Exhaust System, but it is quite large because I was used to the OEM system.
It's fine because it's fun to ride, but I have to be careful to warm up the car in the morning.
I used Beams 300SSExhaust System on my previous CYGNUS3 model.
This one was about the same volume as the OEM, so there may be that Gap.
View detail
Matte Black
It was meant to be lightweight, but it sounds pretty good, too. View detail
Recommended!
Straight line stability is improved!
OEM look and recommendations!
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI Z400, KAWASAKI Z400
Slip-on SilencerBody was great!
Exhaust SystemBody was very clean and nice.
However, the BEAMS Aluminum Emblem Sticker to be attached to the Exhaust System that was packaged together with the Exhaust System was bent and could not be attached.
I was filled with disappointment at the last step of the finishing work, Sticker pasting!
View detail
Beams slip on exhaust
I received the beams exhaust slip on surprisingly quickly, barely a week after placing the order. It is now fitted onto my Kawasaki z900rs se along with acropovic headers and looks and sounds excellent , just as I'd hoped. Thanks. View detail
Fits: HONDA CB250R
Japan Government Certificated, but it can be quite annoying.
Japan Government Certificated, but it is quite complicated.
Especially when Idling and running and Axel is passed.
The sucking sound like old Carburetor Vehicles.
I wish Idling was quieter.
Intermediate acceleration was clearly better.
It blows up smoothly without a clogging feeling.
Pushing is a little too much.
Aluminum Collar cambered and lowered 10mm.
Rear Sets When I put it in, my heel hits the ground when I put my sticky foot in it.
View detail