Reviews
Replace SR with WM's Semi Double Seat IV.
This is a replacement from DAYTONACOZYSeat, but the Seat height will be slightly lower.
The raised Rear makes it easy to check the Fitting position on the buttocks.
The seat feels soft and quite thin, so it seems hard to sit for a long time.
The space between the Seat and Tank (about 2 cm) is slightly empty, so if this bothers you, you may not want to do this.
We are bulking up with TankOffsetParts from Bore Ace, so the gap is about 1cm.
The bi-Ping gives a slightly softer impression, which may be to the liking of different people.
I had no problems at all with the Fitting of the installation.
View detail
Type ordered and …….
It took me a while to do the work because I had to remove and install the tires in order to replace them.
Mr. WeBig…… Do you check the contents of the product once it arrives from the supplier?
It's not the Type I ordered.
I didn't return it because I had to wait quite a while for it to come in and I was happy with either Type, but this is a return item.
View detail
Purchased through Japanese Vehicle Inspection Correspondence.
[How is it used? I purchased this for Japanese Vehicle Inspection Correspondence and theft prevention when I changed my SR400 to Separate handleSpec.
Was the one you received as per Image? It was solidly built.
Was the installation difficult? A small amount of Ditona's Handlebar Stopper was shaved and installed.
How was your experience with it? The Handlebar Lock is now firmly in place.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600
Dress-up
It will look Classical.
I think it is just right for a dress-up.
For better or for worse, the nature of the product is Oil stone.
It is better to have the surface properly prepared.
I was only lazy around the upper Bolt, so I was only lazy around the upper Bolt.
I'm sure there are individual differences, but very small amounts.
Oil blotting is occurring.
View detail
I know it's costing a lot, but it's a little too expensive.
Wind protection is a must since it is a Touring Main. 。 I installed CHIC DESIGN's Bikini cowl on my other W800, and it was so well designed and windproofed that I bought one for my new GB.
But it's a knock-off of Aluminum, so it must cost more, but it doesn't look Large, it's terribly cumbersome to install, and there's no way it's more than twice the price.
A Chinese product with a similar design would cost 5,000 yen. It is suitable for those who can be satisfied with WM's brand.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
So so
The quality is not as good as the price. It doesn't fit perfectly on a motorcycle, it has to be forced.I expected a lot, but I'm sorry that I'm disappointed. There are many types of rear fenders, so I hope there are various options. View detail
It's a good shape, but...
First of all, it's a vehicle-specific part, but it wasn't a pimped-out version. (There may be some individual differences.) The bracket part interferes with the tire and it doesn't work even if you bend it and adjust it. Because there was not, I used the long Bolt of M5 to bite the Washer to avoid interference somehow. It is used as a
The car model is supposed to be Exclusive Design, and you need to buy an additional Washer to get it right. I was a bit disappointed that it wasn't available.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
It's easy to install and has a nice texture, but …
I used it with the DAYTONA Vintage top bridge Handlebar Lock failed
What's wrong with your vehicle?
I was able to lock the Handlebar without the Handlebar Stopper
The thing itself is not bad
I'm going to try adjusting it with Washeretc
View detail
The unexpected struggle
I bought it with apparent appearance. I think that it is good and cheap, because of the price, but I had to bend the Bracket when attaching it. The biggest Neck had to change Handlebar to Separate and it was useless. View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set. It is good to be attached simply.
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set.
It is good to be attached simply.
View detail
The Design of the thing which suits others was not pleasing and it chose this.
The Design of the thing which suits others was not pleasing and it chose this. View detail
Although vibration increases with a specific speed belt and a Mirror becomes difficult to appear, I think that it is good for those who aim at a sporty Style freely since anteversion becomes strong to the grade which is not tight. If Handles are the
Although vibration increases with a specific speed belt and a Mirror becomes difficult to appear, I think that it is good for those who aim at a sporty Style freely since anteversion becomes strong to the grade which is not tight.
If Handles are the Cables of the part NORMAL which became low although it is natural, remainder will come to stand out in cable length.
Although the exchange to a short Cable is not the Level of being indispensable, isn't the direction to worry good to also change a Cable simultaneously?
View detail
it hid, although most will hide by a Tank -- foppish ---like. When a Tank is removed by the Maintenance, it is one article which feels sense of superiority. It does not understand functionally.
it hid, although most will hide by a Tank -- foppish ---like.
When a Tank is removed by the
Maintenance, it is one article which feels sense of superiority.
It does not understand functionally.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
It was used for attaching a fog light. After attachment, since it might shift a little also by light power, it solved by using friction on both sides of a thin rubber sheet. Although it is inconspicuous components, I think that various components
It was used for attaching a fog light.
After attachment, since it might shift a little also by light power, it solved by using friction on both sides of a thin rubber sheet.
Although it is inconspicuous components, I think that various components can use it according to ideas besides a blinker or a fog light, carrying out a state since it can attach to a fork easily.
View detail
It had attached, when the path through a wood was often run by 250TR. Although the purpose is to protect an engine from a stepping stone, the water shuttlecock from the front tire of a rainy day is also prevented. Although it is beautiful at the b
It had attached, when the path through a wood was often run by 250TR.
Although the purpose is to protect an engine from a stepping stone, the water shuttlecock from the front tire of a rainy day is also prevented.
Although it is beautiful at the beginning of attachment, while rushing in, it will become like a photograph.
To the last, if it is used as an under guard, since it is made firmly, I will think enough that a duty is given sure enough, but if you would like to maintain a beautiful state forever, efforts [ stick / periodically / pile up stick and carry out about two transparent protection sheets and / them / again ] may be necessity.
View detail
It is just right die length! However, the splashes of mud of a rainy day are uncanny. it polishes now -- since it has played truant -- a spider -- the measure --.
It is just right die length! However, the splashes of mud of a rainy day are uncanny.
it polishes now -- since it has played truant -- a spider -- the measure --.
View detail
Fits: KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650
Although the chain case of the normal of W650 is a cheap atmosphere for a function and cost emphasis, appearance is improved as changing into a stainless case. The part and a function surface. . . A price is also cheap and recommended.
Although the chain case of the normal of W650 is a cheap atmosphere for a function and cost emphasis, appearance is improved as changing into a stainless case.
The part and a function surface.
.
.
A price is also cheap and recommended.
View detail
It purchased in order to unite with a silver frame. although it is beautiful at first -- a situation -- it is like unreasonableness that maintains a beautiful state. Oscillating measures are also taken in respect of practical use.
It purchased in order to unite with a silver frame.
although it is beautiful at first -- a situation -- it is like unreasonableness that maintains a beautiful state.
Oscillating measures are also taken in respect of practical use.
View detail
He wanted to increase the plating area of a motorcycle and it purchased. Unlike the lever of the black plastic of normal, since it is a product made from aluminum, fairly high texture is taken out. That even free was sorry about is the point which
He wanted to increase the plating area of a motorcycle and it purchased.
Unlike the lever of the black plastic of normal, since it is a product made from aluminum, fairly high texture is taken out.
That even free was sorry about is the point which was carrying out the textured in a part of surface (opposite side of the portion which grasps a lever).
A vine vine is not carried out like other portions.
Although it is not a portion which a hand touches, considering the amount of money, it is slightly regrettable.
since -- it became such dry taste evaluation.
View detail
The object for tandems was also managed, and, either and it purchased as an exterior purely. Although this kana ~ that makes and comes out and in which this price is high just for a moment was thought, various objects for 250TR had only this, as a res
The object for tandems was also managed, and, either and it purchased as an exterior purely.
Although this kana ~ that makes and comes out and in which this price is high just for a moment was thought, various objects for 250TR had only this, as a result of searching.
They are simple and convenient custom parts which anyone can attach easily by bolt on.
View detail