Reviews
Type ordered and …….
It took me a while to do the work because I had to remove and install the tires in order to replace them.
Mr. WeBig…… Do you check the contents of the product once it arrives from the supplier?
It's not the Type I ordered.
I didn't return it because I had to wait quite a while for it to come in and I was happy with either Type, but this is a return item.
View detail
Short aluminum fender
Fits and works perfectly on my Genuine G400C; otherwise known as the Shineray XY400-2, with roots to Honda's CB400SS from the early to mid 00s. View detail
It's a far cry from NORMAL.
Up Fender is good, but exchanged for Makeover
I'm using it as it is in the buLock tieya, but it's totally alright!
Installation was very easy and good.
It would be better if it were a little cheaper.
View detail
Satisfied, except for the price.
It would be nice if the price was a little lower, but it is perfect for Motorcycle makeover.
Installation can be a bit of a challenge, so take your time and install it when you have time to spare.
View detail
Modern outlook on every retro bike
Fitting on: SR400 Much lighter then original fender, it provides a gorgeous modern outlook on every retro bike. Easy to clean and polish View detail
A stylish look
Fitting on: SR400 Very light weight and firm construction compare to the OE one, give your bike more stylish look. Aluminum requests polishing in a few months but easy to clean. View detail
It combined with the front fender and purchased. If it attaches as a description, it will be attached simply. It is better to perform center ply firmly. Since the edge portion is sharp, handling should take care.
It combined with the front fender and purchased.
If it attaches as a description, it will be attached simply.
It is better to perform center ply firmly.
Since the edge portion is sharp, handling should take care.
View detail
Size is Small
The width of the fender is narrower than that of the OEMPlating fender. (Fender) Is the w800 Fender correct? View detail
MiddleShort fender
Smaller than OEM and cool! View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
So so
The quality is not as good as the price. It doesn't fit perfectly on a motorcycle, it has to be forced.I expected a lot, but I'm sorry that I'm disappointed. There are many types of rear fenders, so I hope there are various options. View detail
It's a good shape, but...
First of all, it's a vehicle-specific part, but it wasn't a pimped-out version. (There may be some individual differences.) The bracket part interferes with the tire and it doesn't work even if you bend it and adjust it. Because there was not, I used the long Bolt of M5 to bite the Washer to avoid interference somehow. It is used as a
The car model is supposed to be Exclusive Design, and you need to buy an additional Washer to get it right. I was a bit disappointed that it wasn't available.
View detail
I'm glad we went Middle short
Installation of Fender and Bracket, Installation of Fork and fine tuning of Fork I used it... there are a few Stain-like scratches on the front of the Fender and I used Compound to lightly scratch the front of the Fender The polish was removed to some extent The front wheel part becomes light and is Refreshing I'm glad I did View detail
GOOD!
I purchased this product for use with my Royal Enfield Continental GT650. Two original holes were used and two additional holes were drilled and mounted. View detail
Good quality, but maybe a little pricey
I installed it on a 2017 MODEL CB1100EX with no problems
The quality is good, but I wish the price was lower
If you have a Fender Eliminator or a short fender on, you can use I think it's a good idea because it makes the front area look lighter
The photos are of the Fender after and before it was replaced
View detail
Functional performance aspects Cover itself is good
Motorcycle Parts Overall
Why do you make Reduction in cost with a little thing?
Overall it is very good
Bolt included Stainless Nut Steel iron
How many yen Reduction in cost are you targeting for reason not to make Nut Stainless?
I liked the shape of Body itself as I was thinking in length as well! As I put it out for Anodized processing immediately, the light is duller than this product, but it is a good feeling in Buffing before Anodized
Installation precision is provisional, but there is also free length and its neighborhood is also good
Body is not Fork mounting part is Stainless material
I think that it would be considerably lighter if Aluminum was there, so that VERSION would have been chosen if it came out!
One Bracket feels heavier than Fender
Before mounting it may be remade from the included Bracket by size measurement It feels so heavy and private
Overall it's a good Fender
BracketStainless Mounting NutSteel iron
It is the factor that only went down
View detail
Front fender
Good quality front fender and a nice replacement to give my sr400 a cafe racer look. Looked just like the pictures and fitting was super easy. Would definitely recommend this product! View detail
Fender cb400ss
Nice fender, looks great on my CB. Very light due to it being made from aluminium. Handy that the brackets have slots rather than screw holes so the fender can be raised or lowered to what looks best. Needed to drill one hole to fit the bracket that holds the brake cable but that was easy enough. I think I should mention the finish on the guard is very easy to scratch. I scratched mine just by polishing it with autosol. View detail
Fender Eliminator to sudden rain...
Try!
So I tried to Middle with emphasis on practicality. Short, I can not bear with it too lol
I painted Black to eliminate the presence. The rain is safe with this!
View detail
This fender fits perfectly Kawasaki W800, the width and length is very good. The quality of the chrome layer is very bad though. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afr
This fender fits perfectly Kawasaki W800, the width and length is very good. The quality of the chrome layer is very bad though. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afraid that after a few thousands kilometers and/or a year of usage the fender will need a proper service of putting new chrome layer. Or I will paint it black. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
This fender is said to be made for Kawasaki W800, however the width is little bit too narrow. The quality of the chrome layer is very bad. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy
This fender is said to be made for Kawasaki W800, however the width is little bit too narrow. The quality of the chrome layer is very bad. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afraid that after a few thousands kilometers and/or a year of usage the fender will need a proper service of putting new chrome layer. Or I will paint it black. View detail