Reviews
Short aluminum fender
Fits and works perfectly on my Genuine G400C; otherwise known as the Shineray XY400-2, with roots to Honda's CB400SS from the early to mid 00s. View detail
Modern outlook on every retro bike
Fitting on: SR400 Much lighter then original fender, it provides a gorgeous modern outlook on every retro bike. Easy to clean and polish View detail
A stylish look
Fitting on: SR400 Very light weight and firm construction compare to the OE one, give your bike more stylish look. Aluminum requests polishing in a few months but easy to clean. View detail
MiddleShort fender
Smaller than OEM and cool! View detail
GOOD!
I purchased this product for use with my Royal Enfield Continental GT650. Two original holes were used and two additional holes were drilled and mounted. View detail
Fender cb400ss
Nice fender, looks great on my CB. Very light due to it being made from aluminium. Handy that the brackets have slots rather than screw holes so the fender can be raised or lowered to what looks best. Needed to drill one hole to fit the bracket that holds the brake cable but that was easy enough. I think I should mention the finish on the guard is very easy to scratch. I scratched mine just by polishing it with autosol. View detail
Fender Eliminator to sudden rain...
Try!
So I tried to Middle with emphasis on practicality. Short, I can not bear with it too lol
I painted Black to eliminate the presence. The rain is safe with this!
View detail
The wing fell into place like a native! Exactly as described on the site. All landing nests matched. I will prepare for painting. Thank you
The wing fell into place like a native! Exactly as described on the site. All landing nests matched. I will prepare for painting. Thank you View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
Very happy with your purchase! The wing fell into place like a native. Exactly as described on the site. Just a chic look. (English) Very happy with purchase! The wing fell into place, like a native. Exactly matches the description on the websi
Very happy with your purchase! The wing fell into place like a native. Exactly as described on the site. Just a chic look. (English) Very happy with purchase! The wing fell into place, like a native. Exactly matches the description on the website. Simply chic appearance. View detail
Looks great, works as it should. No complaints. I think WM Got it right when they designed this one. Everything else is too short or too long, and it still functions well as a water suppressant.
Looks great, works as it should. No complaints. I think WM Got it right when they designed this one. Everything else is too short or too long, and it still functions well as a water suppressant. View detail
There is a light feeling which is not in a Normal fender, and it is satisfied also with texture at astringent gloss peculiar to an Aluminum. A DISC vehicle can also be equipped satisfactorily.
There is a light feeling which is not in a Normal fender, and it is satisfied also with texture at astringent gloss peculiar to an Aluminum. A DISC vehicle can also be equipped satisfactorily. View detail
[Foundation commemoration Monitor] The Monitor was won with the Rear fender by WM, and the Tail kit. Thank you for the . The texture of the Aluminum has a high grade feeling, and is very good. Although the Tire was exchanged for the on-
[Foundation commemoration Monitor] The Monitor was won with the Rear fender by
WM, and the Tail kit.
Thank you for the
.
The texture of the
Aluminum has a high grade feeling, and is very good.
Although the
Tire was exchanged for the on-road Tire, I think that the
Fender is matched.
die length also thinks that a Middle short is not too short too long, and a Balance is good.
Although the
instruction manual was kind but it did not become precocious, it was a range made in DIY.
It is a Recommendation in
TR in the direction of an on-road Tire.
View detail
[Foundation commemoration Monitor] The Monitor was won with the Front fender by WM, and the Tail kit. Thank you for the . The texture of the Aluminum has a high grade feeling, and is very good. The Plastic of the NORMAL was cheap, and since
[Foundation commemoration Monitor] The Monitor was won with the Front fender by
WM, and the Tail kit.
Thank you for the
.
The texture of the
Aluminum has a high grade feeling, and is very good.
The Plastic of the NORMAL was cheap, and since it also felt
die length unfashionably, they were exchanged, and they were felt refreshed.
I think that the Fender is matched although the
Tire was exchanged for the on-road Tire.
Although the
instruction manual was kind but it did not become precocious, it was a range made in DIY.
In a direction to show
TR as shapely, it is a Recommendation.
View detail
The product is good quality and fit well to he bike. You can adjust the position with brackets. Installed in two minutes.
The product is good quality and fit well to he bike. You can adjust the position with brackets. Installed in two minutes. View detail
250TR is equipped. Although the front fender has attached the aluminum fender of the short and RIA was made into Long, Before attaching, the balance of the whole motorcycle was anxious, but it became a psycho result when actually attached! Althoug
250TR is equipped.
Although the front fender has attached the aluminum fender of the short and RIA was made into Long,
Before attaching, the balance of the whole motorcycle was anxious, but it became a psycho result when actually attached! Although he has constructed the cabton muffler of WM, and the tail lamp of POSH,
Did classic touch come out more by having constructed this rear fender?
It became an image of the British vehicle.
Attachment is not so difficult, either.
It purchased and he was Satoru Taisho!
View detail
Although it was a time-tested product, since an authentic positive one was not liking, it exchanged. I think that a form and die length are right just.
Although it was a time-tested product, since an authentic positive one was not liking, it exchanged.
I think that a form and die length are right just.
View detail
SR400 was equipped. The touch which is different from a stainless buff with buffing of aluminum is individually pleasing. About attachment, I think that they are goods exchangeable easily [ it is satisfactory at all and ] to anyone. the die le
SR400 was equipped.
The touch which is different from a stainless buff with buffing of aluminum is individually pleasing.
About attachment, I think that they are goods exchangeable easily [ it is satisfactory at all and ] to anyone.
the die length of the fender itself is not too short, either - long -- it comes out and pure [ it does not elapse, but ] -- no matter where it may be somewhat short and may see from, the circumference of the front made into the refreshing can be directed.
View detail
From the pure fender of 250TR, it exchanged together with the company's front fender approximately. A thing is wonderful. It has been satisfied. Although a pure fender is quite unfashionable, it is beautifully [ as it improves ] smart. (Ho
From the pure fender of 250TR, it exchanged together with the company's front fender approximately.
A thing is wonderful.
It has been satisfied.
Although a pure fender is quite unfashionable, it is beautifully [ as it improves ] smart.
(However, there is no touch [ which was seen ] excessive vanity.) The attachment description was unkind.
the what time [ this ] copy ? -- about -- since it is hard to read by dirty printing.
Although it is clearing work, it is serious first to remove a pure fender.
Because it has stopped with many bolts.
being pure (a tail lamp -- a number is included) -- if it finishes removing, the temporary stop of the stay is carried out to a frame, color is given to three holes of a fender, and a bolt will only be bound tight, positioning approximately.
In addition, in the case of an authentic positive one, tail lamps other than the type attached to a rear frame, etc., naturally, the drilling process to a fender is required.
Moreover, although the point of the binding band is a rivet in the case of the normal fender although it is a cable tie (binding band), and fixed eventually in the hole open on the fender,
Since it usually separates in the case of exchange and such a hole is not opened to a new fender, it will stop with a common binding band.
Since quite a many clearance of a fender and a frame merely occurred, I let the binding band pass on the frame, and fixed wiring.
Attachment was easier than the front fender which cannot bind a bolt tight easily and cannot position it easily.
having considered the price, generally, it was satisfied, and came out and carried out.
View detail
It is good! There is the feeling of a retro with a sufficient degree, there is a profound feeling, and it is 縲? Attachment was also super-RAKU.
It is good! There is the feeling of a retro with a sufficient degree, there is a profound feeling, and it is 縲?
Attachment was also super-RAKU.
View detail