Reviews
Needed for replacement of suspension.
It is solidly built and seems to be able to withstand the vibrations of SR. The height is adjustable, which is nice. View detail
Replace SR with WM's Semi Double Seat IV.
This is a replacement from DAYTONACOZYSeat, but the Seat height will be slightly lower.
The raised Rear makes it easy to check the Fitting position on the buttocks.
The seat feels soft and quite thin, so it seems hard to sit for a long time.
The space between the Seat and Tank (about 2 cm) is slightly empty, so if this bothers you, you may not want to do this.
We are bulking up with TankOffsetParts from Bore Ace, so the gap is about 1cm.
The bi-Ping gives a slightly softer impression, which may be to the liking of different people.
I had no problems at all with the Fitting of the installation.
View detail
Type ordered and …….
It took me a while to do the work because I had to remove and install the tires in order to replace them.
Mr. WeBig…… Do you check the contents of the product once it arrives from the supplier?
It's not the Type I ordered.
I didn't return it because I had to wait quite a while for it to come in and I was happy with either Type, but this is a return item.
View detail
Short aluminum fender
Fits and works perfectly on my Genuine G400C; otherwise known as the Shineray XY400-2, with roots to Honda's CB400SS from the early to mid 00s. View detail
Good product, but overpriced.
It's a pretty small bikini, so it's not so windproof, but with the Extension, it's quite effective at high speeds. 。 From the looks of it, I don't want to put Extension on it, but oh well.
The construction is very careful and not plastic.
But if you ask me if it's worth 78,000 yen, it's not.
View detail
Although the visual part is Large tight.
For Motorcycle with Side Stand, I don't feel it is that practical, but it makes a good Accent!
It is also useful for attaching a side bag
Just a little expensive, I guess.
View detail
It's a far cry from NORMAL.
Up Fender is good, but exchanged for Makeover
I'm using it as it is in the buLock tieya, but it's totally alright!
Installation was very easy and good.
It would be better if it were a little cheaper.
View detail
Satisfied, except for the price.
It would be nice if the price was a little lower, but it is perfect for Motorcycle makeover.
Installation can be a bit of a challenge, so take your time and install it when you have time to spare.
View detail
Wow that's cool
Installation is very easy, but it is a bit narrow and may require some tools.
It's not a noticeable part, but it's necessary for suspension replacement, and I think it makes the Sprocket look larger and cooler.
View detail
Modern outlook on every retro bike
Fitting on: SR400 Much lighter then original fender, it provides a gorgeous modern outlook on every retro bike. Easy to clean and polish View detail
A stylish look
Fitting on: SR400 Very light weight and firm construction compare to the OE one, give your bike more stylish look. Aluminum requests polishing in a few months but easy to clean. View detail
I know it's costing a lot, but it's a little too expensive.
Wind protection is a must since it is a Touring Main. 。 I installed CHIC DESIGN's Bikini cowl on my other W800, and it was so well designed and windproofed that I bought one for my new GB.
But it's a knock-off of Aluminum, so it must cost more, but it doesn't look Large, it's terribly cumbersome to install, and there's no way it's more than twice the price.
A Chinese product with a similar design would cost 5,000 yen. It is suitable for those who can be satisfied with WM's brand.
View detail
Not rusting is best. Although plating was not bad, either, he liked the stainless blunt method of light, and it purchased. It is a favorite.
Not rusting is best.
Although plating was not bad, either, he liked the stainless blunt method of light, and it purchased.
It is a favorite.
View detail
It combined with the front fender and purchased. If it attaches as a description, it will be attached simply. It is better to perform center ply firmly. Since the edge portion is sharp, handling should take care.
It combined with the front fender and purchased.
If it attaches as a description, it will be attached simply.
It is better to perform center ply firmly.
Since the edge portion is sharp, handling should take care.
View detail
Size is Small
The width of the fender is narrower than that of the OEMPlating fender. (Fender) Is the w800 Fender correct? View detail
You don't need a Separate handle to look good, Cowl.
This is a definite Cowl.
This is Aluminum Cowl from the long-established WM.
Since the angle can be used for other than Separate handle, it is recommended to use Quantity for Handlebar selection.:Pair (for Left and Right) It will not be done.
It's also windproof, and the design is superb.
I am a Color:Unpainted and attached as aluminum.
good point
The design suits not only the Separate handle but also the Pipe Handlebar.
The texture and design of aluminum is excellent.
It fits perfectly even with normal meter.
It is also highly aerodynamic.
A bad point
High price.
But I think the price is not too high for such a high quality.
I think the Cowl will be very unique with its performance, eye-catching design, and texture.
If you modify the Bracket, you can use it for other types of cars, and it will be an interesting custom.
There are also Classic series other than SR out there.
View detail
MiddleShort fender
Smaller than OEM and cool! View detail
It's just beautiful!
I replaced my Normal chainCover because it was cracked, and I was looking for something sturdier than Normal with a nice shape, so I went with this one.
WM has been specializing in SRParts for a long time and has been making parts for a long time. We are sure that this is the right part for you.
good point
It looks beautiful and shiny because of buffing.
■Material:It is sturdy because it is Stainless.
The Chain is easy to see, which improves serviceability.
A bad point
If dirt gets on the Cover, it will be noticeable. Please clean it frequently.
I'm happy with the result, because it's easier to maintain and dress up the chain.
There are some custom parts that remove the chain cover, but it will affect the durability of the chain if there is no cover on the chain.
View detail
I think the Retro look suits the CB well.
It's aluminum, so it's light and doesn't look like it's being worn.
If possible, the windshield should be a little thicker, and the light frame should be about 2 cm from the Cowl when viewed from the side.
View detail
CB1100 2012 Metal Cowl
What can you say, but a great looker and keeps the draft off the chest. Now to the bike fitting - it was like a glove, around the light bucket, top brackets and bottom bracket as supplied for the 2012 model (fitted base bracket to the horn block and top brackets onto top tree bolts - so a need to state the model/year correctly). Needed a few dry fits and removed the light to be able to grab the bucket inside nuts. Very minor issue with the bolts/nuts for the screen/cowl, as those located beside the instrument cluster a little too long, so swapped out for shorted bolts and nyloc-nuts. Fitment around the light frame lens and shape a true sign of the handmade craftsman - nice in natural finish with wee light buff. The shipment and correspondence was not an issue (even with COVID-19), website clear on supplier progress and the freight journey from Japan to New Zealand. Recommend the supplier and the product, again thanks. View detail