Reviews
Needed for replacement of suspension.
It is solidly built and seems to be able to withstand the vibrations of SR. The height is adjustable, which is nice. View detail
Good product, but overpriced.
It's a pretty small bikini, so it's not so windproof, but with the Extension, it's quite effective at high speeds. 。 From the looks of it, I don't want to put Extension on it, but oh well.
The construction is very careful and not plastic.
But if you ask me if it's worth 78,000 yen, it's not.
View detail
Although the visual part is Large tight.
For Motorcycle with Side Stand, I don't feel it is that practical, but it makes a good Accent!
It is also useful for attaching a side bag
Just a little expensive, I guess.
View detail
It's a far cry from NORMAL.
Up Fender is good, but exchanged for Makeover
I'm using it as it is in the buLock tieya, but it's totally alright!
Installation was very easy and good.
It would be better if it were a little cheaper.
View detail
Satisfied, except for the price.
It would be nice if the price was a little lower, but it is perfect for Motorcycle makeover.
Installation can be a bit of a challenge, so take your time and install it when you have time to spare.
View detail
It combined with the front fender and purchased. If it attaches as a description, it will be attached simply. It is better to perform center ply firmly. Since the edge portion is sharp, handling should take care.
It combined with the front fender and purchased.
If it attaches as a description, it will be attached simply.
It is better to perform center ply firmly.
Since the edge portion is sharp, handling should take care.
View detail
Not rusting is best. Although plating was not bad, either, he liked the stainless blunt method of light, and it purchased. It is a favorite.
Not rusting is best.
Although plating was not bad, either, he liked the stainless blunt method of light, and it purchased.
It is a favorite.
View detail
I think the Retro look suits the CB well.
It's aluminum, so it's light and doesn't look like it's being worn.
If possible, the windshield should be a little thicker, and the light frame should be about 2 cm from the Cowl when viewed from the side.
View detail
CB1100 2012 Metal Cowl
What can you say, but a great looker and keeps the draft off the chest. Now to the bike fitting - it was like a glove, around the light bucket, top brackets and bottom bracket as supplied for the 2012 model (fitted base bracket to the horn block and top brackets onto top tree bolts - so a need to state the model/year correctly). Needed a few dry fits and removed the light to be able to grab the bucket inside nuts. Very minor issue with the bolts/nuts for the screen/cowl, as those located beside the instrument cluster a little too long, so swapped out for shorted bolts and nyloc-nuts. Fitment around the light frame lens and shape a true sign of the handmade craftsman - nice in natural finish with wee light buff. The shipment and correspondence was not an issue (even with COVID-19), website clear on supplier progress and the freight journey from Japan to New Zealand. Recommend the supplier and the product, again thanks. View detail
I'm glad we went Middle short
Installation of Fender and Bracket, Installation of Fork and fine tuning of Fork I used it... there are a few Stain-like scratches on the front of the Fender and I used Compound to lightly scratch the front of the Fender The polish was removed to some extent The front wheel part becomes light and is Refreshing I'm glad I did View detail
Good quality, but maybe a little pricey
I installed it on a 2017 MODEL CB1100EX with no problems
The quality is good, but I wish the price was lower
If you have a Fender Eliminator or a short fender on, you can use I think it's a good idea because it makes the front area look lighter
The photos are of the Fender after and before it was replaced
View detail
Functional performance aspects Cover itself is good
Motorcycle Parts Overall
Why do you make Reduction in cost with a little thing?
Overall it is very good
Bolt included Stainless Nut Steel iron
How many yen Reduction in cost are you targeting for reason not to make Nut Stainless?
I liked the shape of Body itself as I was thinking in length as well! As I put it out for Anodized processing immediately, the light is duller than this product, but it is a good feeling in Buffing before Anodized
Installation precision is provisional, but there is also free length and its neighborhood is also good
Body is not Fork mounting part is Stainless material
I think that it would be considerably lighter if Aluminum was there, so that VERSION would have been chosen if it came out!
One Bracket feels heavier than Fender
Before mounting it may be remade from the included Bracket by size measurement It feels so heavy and private
Overall it's a good Fender
BracketStainless Mounting NutSteel iron
It is the factor that only went down
View detail
Almost satisfied.
As the sitting position got lower, the foot got better.
Mounting Easy.
However, it seems that rainwater will accumulate in Seat when using it in rainy weather,
At a later date, even if it is sunny, water seeps out when you sit down.
When Seat is removed and SeatRear is on the way, the water comes out steadily.
Even if you stand upright, you can not completely drain water, even if you sun it in a sun-dried state for a half day, even if you leave it for a half day you will see a little.
Do not use it in the rain, Bike Coveretc. It is necessary to take measures to prevent it getting wet.
If it is forced to use it in the rainy weather, you can not use it unless you prepare for Pants to get wet the next day.
View detail
Front fender
Good quality front fender and a nice replacement to give my sr400 a cafe racer look. Looked just like the pictures and fitting was super easy. Would definitely recommend this product! View detail
This is the matching seat for the WM Special aluminum tank II. Installation is easy. You need to use the bracket and small rubber bumpers from the stock seat assembly. Be careful when removing the rubber bumpers. One of mine broke :( The seat wobbles a li
This is the matching seat for the WM Special aluminum tank II. Installation is easy. You need to use the bracket and small rubber bumpers from the stock seat assembly. Be careful when removing the rubber bumpers. One of mine broke :( The seat wobbles a little. I'm not sure if it's the missing bumper, but when riding the bike it is not noticeable. The cowl fits snug at the bolts but has some up-down wiggle room at the tail. Not terrible, but just something I noticed. There is not a lot of cushion and seems about 1"+ lower than stock. Still comfortable and overall great seat. View detail
A nice looking and nicely made Cafe Racer seat. Because my riding is solo almost all the time, I especially like the removable fiberglass pillion cover for the few times a passenger may ride with me. The only reason I did not give a 5 start rating is the
A nice looking and nicely made Cafe Racer seat. Because my riding is solo almost all the time, I especially like the removable fiberglass pillion cover for the few times a passenger may ride with me. The only reason I did not give a 5 start rating is the loose fit on the bike's frame. I love the way the seat looks and it's quality, so I will fit and glue rubber tubes over the bike's frame to eliminate the excess clearance. Other than that, I am highly satisfied with this product. View detail
It had won, when it subscribed for the Monitor Campaign of 250TR of No. 3 and he noticed it. Thank you. Although it was , now a Front fender, and he did not necessarily dislike the size of a NORMAL, and height, the whole car body looked large and th
It had won, when it subscribed for the Monitor Campaign of 250TR of No. 3 and he noticed it.
Thank you.
Although it was
, now a Front fender, and he did not necessarily dislike the size of a NORMAL, and height, the whole car body looked large and the one who likes the being collected into the Compact way was looking for the Fender exactly.
Since eyes were attached, it worked happily.
Attachment was able to be relieved in the structure in which the
Aluminum became brave.
However, it is the grade which would like you to make a description carefully to a slight degree.
If it attaches, atmosphere changes drastically and is satisfied with the compactness of oneself liking.
I think whether it is also good to apply an Anodized some day.
Also making
is solid and it is recommended.
View detail
Since the Rear fender of the NORMAL was large anyhow and it had jutted out, it had been searching. Although the Fender concerned also suited the visual field, since the Monitor was won when it was hesitating, in order that a price might stretch a little,
Since the Rear fender of the NORMAL was large anyhow and it had jutted out, it had been searching.
Although the Fender concerned also suited the visual field, since the Monitor was won when it was hesitating, in order that a price might stretch a little, it equips thankfully.
It combined with the
Front and was shapely finished in the Compact.
The car body of 250TR which looks large unexpectedly feels it refreshed, and is satisfactory.
Although it cannot say that a description is not much polite and wavered somewhat, it can work in general favorably.
Also making
is solid and it is thought that it was good-looking and was collected finely.
It is a Parts in which
custom-made heat is likely to rise.
Elegance made to regard as liking to apply an Anodized some day and to strengthen an Impact.
I think that he would like to already come to click when the price of a few is cheap.
View detail
It is [ !, however ] whether to think that it became quite low a Styling and with a guide peg perfectly!? In my case, the admiration to which the Step became near feels dramatically. riding appropriate for [ although it is CB400SS ]
It is [ !
, however ] whether to think that it became quite low a Styling and with a guide peg perfectly!?
In my case, the admiration to which the Step became near feels dramatically.
riding appropriate for [ although it is
CB400SS ] American one -- clever -- it is --
-- me -- mind -- although it is!
View detail
When ohlins suspension was attached, since it interfered, the chain case of normal was removed. if, as for weak me of mind, a chain goes out -- a guide peg -- being torn to pieces -- an automobile inspection -- not passing -- the guess was believed an
When ohlins suspension was attached, since it interfered, the chain case of normal was removed.
if, as for weak me of mind, a chain goes out -- a guide peg -- being torn to pieces -- an automobile inspection -- not passing -- the guess was believed and it arrived at this chain case.
After attaching, even if the person to whom the guide peg was torn to pieces in SR riding had not heard it and there was no chain case, it got to know that an automobile inspection passed, but they were the goods which existed when it was and which may come out, and may not become obstructive, either but may glitter.
It is begun to run chain oil at the time of carrying out re-spread, and the oil scatter to an ankle is pressed down.
View detail