Reviews
Good vibes (^_^)
We also attached a heat guard when installing the muffler (^^)
It got together in a nice touch (*´-`)
Installation was easy, too. (^_^)
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Cheap for Stainless Steel
Because I did not have an Exhaust System, I purchased it for the time being. It was the cheapest in Stainless. It is quite quiet when wearing Baffle. The car inspection also was no problem below 94 db. By the way, if you remove Baffle you can not get on Level's explosion Probably 100 db or more. I think that it looks like a unique personality that does not look elsewhere. It is better to add slots to Pipe attachment and add Exhaust Band. After ten thousand kilometers, the Tail Pipe at the Baffle attachment part was broken and the Baffle was lost, so we abandoned the use. It was disappointing because I liked it quietly and quite. Ba View detail
good.
Easy to install, simple look, excellent in Cost performance and very good feeling.
However, I feel that sound quality is more than expected. The volume is also better than Small a little more.
View detail
Construction is solid.
Used in conjunction with YamahaOption's Rear box.
The hole when attaching the base plate of Box is opened in the carrier
It seemed not to match Yamaha 's thing and it was necessary to reopen it separately.
It would not have been necessary to open it for GIVI or Ku Case.
The texture of Stainless is solid and quite good.
I regret that it became difficult to lock the Seat slightly after installation.
View detail
It is a bargain!
Attached to CUB 90. I coped with painting the liquid Gasket because I could not get old Gasket, it was no problem except for about 30 minutes. Accuracy is good and the holes are not aligned etc. etc. There is no Trouble
I wonder if the sound should be a bit more Small Shark. It sounds quite motivating while driving
It is not set, but there is no power drop and feeling turns above NORMAL
It is a bargain if this content is around 15000 yen
View detail
Despite at 1st shipped wrong exhaust model, Webike were quite fast to expedite a collection courier from DHL to take back the wrong goods,and re send back the intended exhaust. All this processes move in a timely manner but only to miss out to use on my
Despite at 1st shipped wrong exhaust model, Webike were quite fast to expedite a collection courier from DHL to take back the wrong goods,and re send back the intended exhaust. All this processes move in a timely manner but only to miss out to use on my December road trip. Customer service promptly keep on emailing about the status and steps of the exchange. Nevertheless will still order from you guys,price quite reasonable,only if the shipping charges could be a bit lower View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Reduction of emblem
? 【What made you decide the purchase?】 Reduction of mandatory emblem
? 【How was it actually used?】 Mandatory It certainly makes a little emblem feel Mild
? 【Was it difficult to install? (Hard parts case)】 It can be mounted easily anything
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Do not mistake the direction of optional mounting
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] Required None in particular
? [Request to Manufacturer - Please tell me if there are any improvement points】 Required Looks cheap
? 【Have you compared items?】 Required None in particular
? [Others] Any
* Optional items can be filled in as much as possible.
View detail
Fits: YAMAHA Axis Street, YAMAHA Axis Street
Rear box 's "solid feeling" has increased
Opportunities to go out at Axis Treat to Camping touring increased and it took a considerable weight on the Rear box, so OEM's Carrier thought so intently that I exchanged it.
The load limit weight of OEM Carrier is "3 kg" However, in reality, I think that it is no problem to put items of about 10 kg.
However, in that narrow Carrier, each part was subject to load and there was a possibility of breakage, so I planned to replace it with a solid carrier.
It was this Tandem bar that I found in such a place.
When I opened the box I received, in addition to Body
- M8 Bolt 25mm ×4
Collar 3mm ×2
- Original sticker
- OriginalPlate
- Handling Instruction Manual (A4 paper Quantity : 1pc. )
Was bundled.
Handling Instruction Manual simply "Color installation location" Although it is only a thing that explained the installation, since the installation is easy only with desorption of 4 Bolt fixing the Carrier, did not feel the shortage.
Although it is in the picture below, OEMBolt has different Lengths before and after Length is different on the front side and the back side, but since Bolt used for installation has 4 same lengths, it is only on the Front side "Color" It seems to use.
I did not specify Torque for tightening, so I narrowed it down by intuition, but I think that it is better to follow it if the specification is listed in YAMAHA's service manual.
There are a lot of holes in the Bracket for the Rear box, which seems to correspond to each company's Rear box, but there were six places to correspond to our GIVIBase.
We used four at the outside, "fixed feeling" after fixing to OEM Carrier "Corrugated Plate" It's definitely better than fixing with.
However, the fixation holes on the Front side have become elongated holes, but the thing of this time was full at both ends so that it became installed.
Although it is not a hard work, there may be places made by "manual work", so there may be scenes that require processing depending on the object.
Also, I also have told other people, but the corner below Bracket is sharp and sharp, so wash after installation etc etc. There may be times when you need attention when touching with.
There was also a place which became Giza Giza in the finish of the welded part, but there was no problem because it is a position to hide if attached Carrier.
Although I am satisfied with my own functionally and looks well, the best Neck could not be purchased quite easily until my Small Payment came up at the price.
View detail
It is a good Sound !!
Because there is no manual, it took a while to install.
Although it was the first exchange of Exhaust System, an optional Gasket [KITACO] Used, exhausted without any leaks successfully installed.
The texture is pretty solid, Large satisfied from Cospa!
Sound of the essence is deep bass and considerable volume than I imagined. Even if Baffle is attached, it is good enough sound, so I will leave it attached. Running [Torque] I feel it does not change much.
I tried it, but I do not have After Fire and I do not need carburetor adjustment. I did a good shopping!
View detail
Mounting easy
Installation was easy for Mecha.
According to the description of the product, the effectiveness of the emblem became weak. It seems to contribute a little to improving fuel economy. Regarding the startability of the Engine, it seems that the pressure inside the Crank is steadily decreasing, from the point where the effectiveness of the emblem is weakening, and the burden on the Engine Starter Motor seems to be decreasing.
I think that the effect on price is sufficient.
View detail
In keeping with BMS-R's Exhaust System purchase
When purchasing BMS-R's R-EVOExhaust System for YZF-R25, we bought it together.
Other Manufacturer also has a Heard Guard but I chose this because there is no price and Logo.
There is no problem with packaging, but Instruction Manualetc. It is not included. (Cost reduction?) Just tighten together with Bolt at the end of Exhaust pipe of R25.
Although compatibility with Exhaust System was unknown, although some uneasiness remained, wearing. The interference between the Exhaust System and the Heard Guard is a feeling that it is not grueling.
Depending on the Exhaust System there may be a possibility of interfering with the Heard Guard.
Just made of Aluminum? The texture was as expected, so we are satisfied.
Heat resistant Seal and ordinary sticker were included.
It might be a good idea to paste another Sticker on the Heard Guard section.
View detail
Easy improvement
I wrote that embrechment at AxelOff was written, but after testing it was really reduced when I ran the test.
I feel I've improved my dandruff without heart or startup.
The appearance of the product itself is rather cheap, but it does not matter so it does not matter.
Easy to help!
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
I hear that the disappointment is intense - - - -
I hear that the out-of-offs are fierce, but for now I can use it without problems.
The bass sounds more resonant than OEMExhaust System and it is very comfortable.
And it matched with Blue's R25 and WirusWin's Sticker and it looked very much better.
I am satisfied that I can not loudly rinse too much volume without Baffle.
However, the attached Gasket is incredibly brittle!
It cracks when it is installed - - -
I currently use the attached Gasket with liquid Gasket, but it may be better to purchase Gasket separately.
Even Gasket was good, it was a perfect score!
View detail
For APE, it will be noted with Type that does not see much
Attached to APE 100.
For APE, the Exhaust pipe will come next to it, so it will be another impression.
(I was quite asked at Touring)
Is it good for Dirt?
It does not interfere with Drain bolt at all and does not interfere with Plug, so it's easy to exchange.
However, please note that the Exhaust pipe is right beside, depending on how the feet are lowered.
I bought two Exhaust Pipe Guards and completely guarded it.
Sound is unexpectedly normal, when I put Baffle it is slightly lower but I do not feel like being annoying.
On the contrary it might be unsatisfactory for those who value sound.
View detail
I like the burning color of Titanium
Purchase Titanium's Racing Type, enough performance when considering the price.
With the OEMExhaust System, using the 6th gear at 4500 revolutions tends to be Knocking, but after switching it will be very smooth.
Sound is wastefully useless so it can be used for commuting.
Just while I change my clothes I have idling trying to warm up and I will stall in about three minutes. I hope that if you blow a little.
Other than that I am satisfied so let me assume the rating of star 4.
View detail
Great exhaust ... And the sound is neither loud nor quiet. And the main thing comes out under the tail. Shoot db killers without them the best (Google Tranlation) Excellent exhaust ... and the sound is not loud or quiet. And most importantly it comes unde
Great exhaust ... And the sound is neither loud nor quiet. And the main thing comes out under the tail. Shoot db killers without them the best (Google Tranlation) Excellent exhaust ... and the sound is not loud or quiet. And most importantly it comes under the tail. Remove the db killer without them best View detail
Volume above expected
Attached to SR 400. Connected to Normal exhaust pipe Especially, I had little room, so it was Large strange to fit in. I like Design.
With the Large volume more than I thought, there is also a shame feeling shy in the neighborhood a little. However, the exciting sound of excitement while driving is about a good Sound to be loveable, doubling the pleasure of Touring.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
As expected
I was concerned about emulsification of Oil and was considering buying an Oil catch tank but I purchased it thought that One-Way Valve is more effective to prevent the flow of water into the Engine.
The installation time can be easily done in about 10 minutes, the price is cheaper than the products of other companies and it is excellent in Cost performance.
However, it is not good for Visual. Moreover, it is unable to be disassembled and it is unknown how durable it is.
I do not yet know the effect of Oil on emulsification, I think that Engine braking from 4th speed to 3rd speed and 3rd speed to 2nd speed is Mild and I am doing as expected performance.
Based on the above, it was set to ★ 4.
View detail
To people who place importance on appearance.
I bought this separately because the Guard was not attached to the Slip-on Silencer I bought.
Because Manufacturer's Logo is not attached, I can stick a sticker so I liked it too.
Screw It is possible to attach a hole without deviation of the hole.
View detail
For Fi
I replaced it with a new car 500 km. NORMAL's Exhaust System is heavy. It can be considerably lighter. Since I attach Baffle, the sound will not be bothersome. Driving by removing it to drifting will cause troubles in your neighborhood. I bought Joint gasket at the same time, but it is not necessary.
I was able to install Exactly even without liquid Gasket.
View detail