Reviews
For 17 years.
I bought the same Exhaust System 17 years ago at a local store and installed it myself.
I was looking for a new exhaust system for my Silencer when the weld cracked.
The sound is still the same and quite quiet.
Good looking, good price.
I also appreciate the fact that you can sell me an Exhaust System that fits my 36 year old Motorcycle (HA02), which is the same age as mine, for a long period of time.
View detail
awesome!
Received the product in a big box with extra protection! Just fitted this on my SR400 and now it looks cleaner than before! quality is good and its easy to install too View detail
Short Exhaust System with crisp sound
Installed on a JA55.
I like the Short look! (Exhaust pipe part was personally painted) 。
Japan Government Certificated is not, but Baffle is a Quantity:2pc. If a Set is installed, it is Large and not noisy.
There is a little interference near the Silencer when the Right leg is lowered.
It may be better to take measures with ThermoVantage or Heat Guard of Universal nature.
The basic replacement process is the same as for other Exhaust Systems.
However, the band that holds the Silencer in place is quite hard, and without vise pliers, etc., it is a struggle.
View detail
Hypervalve
I replaced the weight roller, clutch spring, etc. together, so I can't tell the effect of the hyper valve alone, but I can tell the difference on hills, high speeds, etc. far more than with the NORMAL valve. View detail
OEM Exhaust System will cause interference.
I think it is a good price for a Fender Eliminator Kit, but the blinker interferes with the Exhaust System if it is not an Exhaust System Up Type. View detail
Hypervalve
I had installed it on my LEAD125 before when I was customizing it in various ways, and I felt that it increased acceleration without decreasing fuel efficiency, so I installed it again this time! View detail
ClutchP Ring
I feel like my driving and acceleration has changed. ?? View detail
Light Roller
Not sure of the g-count, but it's pretty light ??
We'll see if it was the right decision to replace it on the run we're about to make.
View detail
I'm happy with the result, but the installation might be strange for Large.
I asked a nearby Shop to install it, but the installation work seemed to be Large strange.
First of all, the Exhaust System was supposed to be an Exclusive Design product, but when it was installed, the Exhaust System hit the Step Board of the Body and could not be installed (the removed Step Board could not be put back on) &arrarr; He had no choice but to cut the contact part of the Step Board round.
Then, the Bolt for the mounting bracket was 1 pc too short and could not be attached &arrarr; I used a longer Bolt from the shop.
As a result, I am satisfied with the color, style, and sound, but I am a little disappointed that the installation is Large strange.
View detail
Attached to Bore UPEngine
Installed on a LITTLE CUBFIEngine with 88CC bore.
It was installed without any problem, but when the Center Stand is raised vigorously, it hits the Exhaust System.
The Sound of with Baffle is my favorite, but people around me say it is too loud.
I was worried about the design and the Exhaust System Up Type, but I am glad I went with this one.
View detail
Great
It is recommended for people who always go uphill steeply, for example, when commuting to work.
The engine noise is quite loud, although it runs quickly, probably because it maintains the RPM that produces the most Torque.
If you like the idyllic DIO 110 that toots along at low rpm, I don't recommend it. I sometimes wonder if I should change it back.
View detail
Top quality, looks great
This is a top quality item. The welding is handmade and strong. The look is perfect for the bike. The new spar weight 150g, the pair of pillion supports it replaced weight 1500g, a big improvement. The piece fit perfectly to the standard exhaust and frame, millimetre perfect. Great value-for-money, thanks Webike and Wirus Win! View detail
Weight 14 Grams
Since there was no mention of weight in the product description, I relied solely on the product description.
The weight is 14 grams, 6 grams less than the OEM 20 grams.
Installation is not difficult as it is simply a matter of replacing the OEM Product.
The changeover has clearly increased acceleration. The difference can be clearly seen in DASH and overtaking acceleration at the end of a traffic light. Rapid acceleration even on an uphill.
The time to reach the maximum speed is clearly faster, but the maximum speed itself does not seem to have been lowered either.
As for Demerit, the exhaust noise is still too loud.
Fuel economy is still worse than OEM when driving only around town, but not much different when driving at a constant speed in Touring.
The price is the same as OEM and large size, so it can be recommended.
View detail
It's cost-effective.
I was looking for a product to improve performance on my Monkey125 motorcycle. I found T-Rev and WirusWin products, and I chose WirusWin products while thinking about which one to choose between the two. It was a very good choice because it was cheap and functional. Features such as improved responsiveness, improved fuel efficiency, and improved mobility are excellent. It's still before installation, but it's a product that I'm looking forward to after installation. I'll use it well. Thank you. View detail
Focus on appearance
Product Description. Sound good." I think it is Large sturdy even without Baffle.
I'm happy with the look of the product this time.
View detail
Cool looking Exhaust System
Sound quality is very good
Without Baffle is a little noisy.
Might be a little annoying to drive in a residential area.
View detail
be motivated
Performance has not changed significantly due to FI, but the sound is great.
Satisfied with motivation Sound
View detail
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
![Atomic Twin Exhaust [Full Exhaust]](https://img.webike-cdn.net/catalogue/images/89992/grom3_atomic_twin_fullex_baz_d_TS.jpg)
The unique look of the WirusWin exhaust was what sold me on the product
About quality and texture, I can confirm that the quality is great and that the materials used are tube stainless steel for the exhaust system and plate stainless steel for the license plate relocation kit.About the feeling of use, The unique look of the WirusWin exhaust was what sold me on the product but I am very impressed with the quality of the build and sound it produces. Products to buy together, WirusWin have an open air cleaner kit for the Grom that would be ideal to also add to your cart to complete the basic performance upgrades. Difficulty of installation, I can say the fitment of the exhaust system was easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike, the license plate relocation kit was a little more involved due to the wiring. Cost performance and comparison with other products, The pricing of the product is great. You receive an exhaust system that is made using high quality stainless steel material and has a high quality surface finish. Cheaper exhaust systems are available but for a little extra this exhaust system was my choice. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Sharp Exhaust System for CUB was installed on MOTRA.
The Rod Silencer Exhaust System that was previously installed on my MOTRA broke, so I purchased the Sharp Exhaust System for CUB from Wills WIN and installed it on my MOTRA. The exhaust bracket bolt for CUB was cut off because it interferes with the Brake pedal arm. However, since the mounting bolt is gone, we have to consider how to mount the silencer. I found a Silencer band that I could use from the parts I had on hand, and I was able to install it by modifying a long nut and Universal Stainless Steel Bracket in kind. When I started the engine immediately, I heard a nice thick IdolRing sound. However, when the Throttle is turned up, it makes an explosive noise. I drove the car for a while, but the noise was so loud that I felt sick when I was driving. So, I made my own Baffle and installed it. With this, I was able to reduce the exhaust noise to a level that would not disturb the neighbors. I like the SMART design of the carburetor. I think it is a good material for a custom base with good cost performance. The current engine is for JAZZ, and MOTRA does not supply OEM parts, so I have no choice but to use the same engine to keep it running. The result is a very satisfying one. If you want to copy this, please do it at your own risk. View detail