Reviews
Fits: YAMAHA BirdCity125
WirusWin WideTreadKit for registration of light motorcycle with side wheel
I think the tread is wider, so I feel more ground contact, but the tires are on the outside, so if you ride as usual, you may rub the wheel on the side of the road, so I think it is better not to go through the road. View detail
one's feeling while riding
The glide comfort has improved dramatically. The height adjustment is very useful for my short stature. View detail
Down a little and the footing is improved!
The replacement was done as a DIY project by myself; it was a little difficult to remove the normal suspension and install the new DownSuspension by lifting the rear wheel from the Center Stand position.
It would have been a little easier to work with Jack in the car.
The suspension hardness can be changed, but since this is a commuter spec, I set it to the longest setting.
The footing has been improved.
Side Stand is used as OEM, although care must be taken when stopping.
I am generally satisfied with the product.
View detail
I have no problems at all with Circuit driving and I recommend it for its high quality!
I installed it to run Circuit on my GROM (21 yrs old). Once I tried a type that only slightly increased the NORMAL footpeg (peg), but it was not useful at all because it scraped the road surface at the corner. So I replaced them with these Rear Sets, and I am satisfied with the Large change, as they do not scrape the road surface at all, even at full bank.
The position is 150mmBack and 70mmUp, but it can be used for city driving as it has a decent amount of bank and yet the position is not too high. Of course, it is quite high compared to NORMAL, so I think it is not suitable for long touring (I have not tried it).
The price is reasonable among the products made by FOR JAPAN MODEL MANUFACTURER, but the quality is good Large change, and it was not inferior at all to the other famous manufacturer's rear sets installed on GSX-R1000 that I ride in the main. The footpeg is knurled all the way to the tip, so the boots do not slip and can be held firmly, making it easy to ride. Also, I don't know why, but GEARShift is now slightly easier to use.
Since the footpeg of GROM is fixed to the swing arm pivot by co-tightening, the Rear Maintenance Stand cannot be used when replacing the footpeg, and the engine must be jacked up or the body must be hung from above. I replaced the arm pivot by using the front stand and hanging it from the top. If you are not confident, it is better to ask the shop to replace it.
Rear master cylinder is fixed to the Rear Sets on the Right, but since its position has changed from NORMAL, the Master Cylinder Hose interferes with the Side Cover on the Right and the Side Cover cannot be installed as it is. I was not able to change the hose routing, so I had to change the hose routing. I had to cut down the side cover a little to avoid the interference because it was too much trouble to change the hose routing. It took me only 15 minutes to complete the work with a thread saw, sandpaper, and water-resistance paper finish. Please refer to the photos on this page for reference.
View detail
Rediscovering the advantages of OEM
The footing has improved somewhat, but even so, if it bottoms out on bumps… I went back to OEM after all.
It seems to increase the height (length) of the Fork Spring with the attached color, but maybe 60?Down is No Color and 40?Down is… with the color.
View detail
Fits: HONDA Forza Si, HONDA Forza300, HONDA Forza300
The ride will be harder
Lowdown spring and Bracket were introduced to improve the footing
The footing has improved, but the ride is a little stiffer
View detail
It was useless.
LEAD 125's Normal rear shock makes it impossible for the unevenness of the road surface to be fully absorbed and makes the surroundings of Rear unstable.
I purchased this item to improve riding comfort.
Although I thought that it was exclusively for a car model, Shock itself is like a universal product and it is a form that forcibly mounts the attachment part whose Screw diameter is different.
I feel uneasy riding with the rattling coming out to the attachment part, bad ride and rattling.
Large The absorbency when I got over a difficult step was not bad so I wanted to keep using it, but because I am afraid I removed it.
View detail
Fits: SUZUKI address V125, SUZUKI address V125
It was diverted to STREET MAGIC equipped with ZZEngine
Purchased for diversion to STREET MAGIC.
Although the price increases from a certain D company and K company, the adjustment range is wide accordingly (Pre-road no step - Damping 20 stages) so you can adjust it to your liking.
Furthermore, since full height adjustment type car height adjustment is also possible, even when STAND rubs at the time of banking it can be dealt with even if. (However, if you raise the car height, Rear tire will be grounded when using Center Stand, so it will be slightly disadvantageous on the Maintenance side)
Also, as there are two kinds of M10 and M12 in STREET MAGIC's Rear suspension Mounting Bolt, do not forget to check the vehicle's Mounting Bolt diameter before purchasing. My vehicle (TR50V CA1LA-103***) Was M10, so I was able to install.
View detail