Reviews
In a sense, it is a cosmetic parts.
Response up, acceleration up, fuel efficiency at startup, and ease of embracement, etc. can be obtained. [Hyper Bulb]
[Hyper Bulb] ‥
Also known as. Decompression Valve." 1wayValve." Parts that can depressurize the inside of the crankcase, also called 。 Decompression Valve is apparently being introduced in the Race world as well!
How Hyper Bulb works and how it works. ‥
■Working ■
Power loss can be reduced by reducing pressure resistance in the crankcase.
■ Mechanisms ■
What is Hyper Bulb? ‥
Hyper Bulb is another name for Decompression Valve." Internal Pressure Control Valve 1wayValve." It is also called
The valve is in the middle of the Body passage. 。 When pressure builds up, the system pushes the Ball up to release the pressure.
Piston valve is tightened to relieve pressure during descent and to prevent backflow during ascent 。 Blowby gas flows in one direction to prevent backflow.
Example:Underwater. When On the ground. Which can run faster?
→ of course. On the ground. I would answer. 。
Underwater, the water pressure is so great that there is no way to run at the same speed as on the ground. 。 in other words Underwater, the pressure is so high that it slows them down." That means
The engine is constantly undergoing compression, and the pressure inside the crankcase is higher than the Large pressure. 。 This pressure becomes resistance (Pumping loss) 。 there Hyper Bulb. The use of the "C" in the Crankcase to maintain a negative pressure inside the Crankcase reduces resistance and prevents power loss in the engine.
■Merit■
Reduction of engine braking
● Improve Response
Improved fuel efficiency
Improved startability
Oil Life Up
Reduction of engine braking, response improvement, and startability improvement of engine parts by the decompression effect.
As a result, you can experience the effects of response up, improved startability, etc. 。 Improved fuel economy Reduced wasteful combustion leads to increased fuel economy 。 Oil Life Up reduces the burden on the engine and the damage to the oil. 。
■Demerit■
Cannot be disassembled for cleaning.
Winter is particularly frightening. 。 When the water in the Valve freezes
Since the pressure cannot be released, the pressure in the crankcase increases rapidly, and eventually the pressure becomes unbearable and the oil spurts out.
If you put it on backwards, it will lead to a Large accident. 。 There is also a life-threatening demerit→ that is, if you put it on backwards, the pressure will not be released.
There have been cases of fatal accidents. 。
Large change in which oil spurts out while driving, etc.
Cannot be disassembled and cleaned. Surprisingly fatal.
Blowby gas contains oil mist and moisture, so there is a high possibility of oil emulsification.
As a countermeasure, periodic disassembly and cleaning is necessary, but since this Hyper Bulb cannot be disassembled, it must be replaced periodically, etc.
You should also have a proper understanding of those Demerit before making a purchase.
Mounting Method
→Working time:It takes 5 minutes to do it (laughs).
Simply cut the middle of the OEM hose with scissors and install the Hyper Bulb in between (Instruction Manual included).
After installation
◎Improvement of Response Improvement
◎Idling vibration reduction
◎Engine braking reduced.
You will experience it immediately.
The downsides are disassembly and cleaning and the price (LOL).
I was like, "This small thing costs 6,000 yen! I thought (laugh).
But considering the cost effectiveness, I thought it would be cosmetic.
I know it is a bit of a stretch, but I think of it as wear-and-tear parts, like putting in expensive oil (laughs).
It is easy to install, so please use it as one of the custom parts for your motorcycle.
View detail
Easy to ride with reduced embrittlement.
I wanted to make the white color less noticeable on a matte black car body, so I applied Carbon Seat that I had at home.
Easy to install, effective and affordable.
Periodic cleaning is necessary.
View detail
Smoothed out the embrasure.
Durability is normal because it is a consumable item.
The CowlCover was installed at the same time as the Hyper Ignition Coil was installed to prevent oil deterioration, etc. The time lag at Throttle ON/OFF was reduced, and the throttle off embrace became much smoother from full throttle to full throttle.
View detail
Hypervalve
I had installed it on my LEAD125 before when I was customizing it in various ways, and I felt that it increased acceleration without decreasing fuel efficiency, so I installed it again this time! View detail
It's cost-effective.
I was looking for a product to improve performance on my Monkey125 motorcycle. I found T-Rev and WirusWin products, and I chose WirusWin products while thinking about which one to choose between the two. It was a very good choice because it was cheap and functional. Features such as improved responsiveness, improved fuel efficiency, and improved mobility are excellent. It's still before installation, but it's a product that I'm looking forward to after installation. I'll use it well. Thank you. View detail
Fits: HONDA byte, HONDA byte, HONDA byte, HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus)
Easier to run.
Installed on Byte. The work took less than 10 minutes.
The engine noise became quieter and acceleration smoother, and although the difference was minimal for a 50cc engine, the effect was clearly noticeable.
Although the engine braking is weakened due to the structure, it is not so much that it is dangerous, but rather that the feeling of falling forward due to the Axeloff is reduced, making it easier to ride.
I would highly recommend it to all ZOOMER drivers who share the same vehicle body.
View detail
Excellent anti-embrittlement measures.
I had heard it was good, but I didn't realize how much it would change….
However, MaintenanceCycle is exploring
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
this is astonishing
Product Name
Hyper Bulb
Item Number
W-825-6970
Vehicles
Grom (JC61)
Number of man-hours
About 30 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, -Driver, Pliers system,
Why did you choose this product?
I bought it because it was recommended to me by an acquaintance who is a Grom rider. I wondered if it was true because there were many effects that I had researched, but my interest was piqued and I decided to purchase it.
Was the one you received as per Image?
It was exactly as shown in the Image. It is a bit larger than I expected.
Was the installation difficult?
Installation was difficult. It took a long time because I had to install it around the small wiring area and the tools did not fit as well as I would have liked. I think it would be better not to cut the original rubber wire in case this product breaks.
How was your experience with it?
Emboiling has been reduced. Also, the fuel economy has improved a bit. From a commuter's point of view, I am very happy. It will take some time to get used to it at first because the embolement will be weakened. However, I was surprised that the ride quality changed so much with this smallest component. You should change this. It is not too much of a tool, so anyone can change it. I think you should hurry up to order it now that it is in stock. You can feel the change in the body of the car.
[Included Parts:were they on?
It came with a Sticker and I was satisfied with the high quality feel.
[Was there anything that disappointed you?
It seems that inspection is required, but it is also strange to remove the Large, so I would like it to be made so that inspection, etc. is not necessary.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
this is good
I could feel the effects!
Response up is very clear!
The embellishments were tight, so I put on the Hyper Bulb and then
Mild and easy to drive around town and touring!
If you are not sure, you should put it on.
Parts cleaner inside while replacing the oil.
Cleaning.
View detail
Downshift is a nice touch.
Downshift now has mellow Engine braking. It is good for city driving, and I am glad I installed it when I was touring. I recommend it to other Z125pro riders. View detail
PCV Valve equivalent
I purchased this since Choinori does not have PCV valve. RPM revs down smoothly when letting off the throttle.About quality and texture Overall I am happy with the purchase. View detail
Very good.
Engine braking was considerably reduced.
Easier to ride.
Supplement
The lower pressure was lowered so the Hyper Ignition Coil (https://www.webike.net/sd/24632359/) and
Plug cord was replaced.
The hose on the air cleaner side can be installed without cutting.
No longer needed in the future. It is easy to restore it when you no longer need it in the future.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Top etc. with smooth Engine braking.
I'm glad Engine braking was smooth and up etc. when I put this Valve than OEM.
I extended the Hose and attached it to the back of the Cover in a creative way so that it doesn`t look like it`s behind the Cover.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Anti-embedding measures
You can feel that the emblems are Mild in the Others' GEAR, although the 2nd to 1st gear is a slight change.
In layman's terms, it's easier to ride!
I don't know about fuel economy or anything else yet, so I'm looking forward to the future.
It looks like (Polish) …… so I painted it Red.
It could be a hassle to clean it around the Oil change, but if you want the ease of riding, it's probably a good buy.
View detail
good
The engine braking is calmer and the Response is better, I used to avoid using the 3rd gear to 2nd gear engine braking because it was too hard, but now I can use it. I wonder why NORMAL doesn't have the One-Way Valve.... View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
I'm impressed with the change in operation! Best of all.
It is installed in Grom JC75.
Installation is easy if you give up pulling out of the OEMHose root and take the method of cutting the Hose.
I gave up trying to pull it out because I couldn't even get my fingers in the root and it was hard.
Cut the OEM Hose for Parts...just throw away the included Hose, take care of the orientation and plug it in between!
The engine braking that used to be overly aggressive when trying to apply the same engine braking as a car with more engine displacement volume than 125, now stops smoothly.
Isn't that a necessity if you drive a 4-speed grommet? It's such a change.
The bad thing is the look you all wrote about, Plastic looks cheap.
View detail
It's relatively low cost and installation is very easy to do, even if you're a do-it-yourselfer!
Rod Silencer Exhaust System and Quantity:I bought it as a set!
I don't have a lot of mileage after installing it, so I don't know how well it works, but I'm planning a long distance touring trip soon.
I'll be reporting again on the effects of wearing the Touring after the Touring!
Also, the Manufacturer says it will improve fuel economy, which I'm looking forward to! Stay tuned!
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Recommended
I installed it on my Grom. It is very easy to install and if you can do a little bit of maintenance, you can install it in 10 minutes. The effect is to reduce the engine braking and improve the response. (especially in the mid to high RPM range) I was able to experience the I'm happy with it because it was exactly what I expected. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
If it works, it's cheap
I haven't received it yet, so I can't comment on its installation or effectiveness, but theoretically, it works It looks promising Perhaps the content is a very simple trick
From those who have already used it, the engine braking has indeed been reduced (125's Single, if you don't think about how well the throttle is returned, the speed will be too slow ), so I'm hopeful that the comments have been issued
On the other hand, the comment of Parenthesis bad has also been fired in succession The OverRACING slider will be attached to the top side, so expect it to hide I'm working on it! I'm a little worried that I can't install both, but since it's a rubber hose LargeIt will be sturdy! I don't expect it to power up, but the emblems are as claimed If it's reduced, it will certainly make the ride easier
I'm waiting for the goods to arrive with great anticipation!
View detail
Loss Without Attachment
Engine braking mentally to say the least
Tool Slotted screwdriver can only be done in 5 minutes
I wonder if there are so many Parts for beginners
View detail