Reviews
Torque will go up.
I bought it because I heard that it reduces the effectiveness of embellishments.
I didn't feel the amazing effect as shown on YouTube.
All are slight changes.
Still, it is better to have it than not to have it. 。
If it helps at all.
View detail
Hypervalve
I replaced the weight roller, clutch spring, etc. together, so I can't tell the effect of the hyper valve alone, but I can tell the difference on hills, high speeds, etc. far more than with the NORMAL valve. View detail
Not sure how to install the item please help
Picture 2 (from winrus) that was also poorly printed and added to the package show the valve been mounted with the wire ring and round edge towards the engine. The other (user) pictures show the white ring the other way around. with the white part facing the other way. View detail
So-so?
The high RPM extension is good, but I would like to see a more detailed Instruction Manual. View detail
Mostly satisfied
Engine braking is now Mild and can be pulled in all areas. View detail
The installation effect is certainly there.
1Engine braking fee rings became gentler.
2Reduced deceleration
3Axel opening/closing jittery feeling with the donut has been reduced.
4I feel like there is more extension in the high RPM range.
I feel that the rolling resistance of the Tire is reduced when embracing, and the run and run distance is increased.
The above is the Merit that I felt and installed.
is …
When observing the transparent hose extending from the engine after driving, it can be seen that water droplets are adhering to the inside of the hose, and the moisture from the blowby gas mixes with the oil mist to form an emulsion that clogs the One-Way Valve, making the Valve unable to control the internal pressure, which may destroy the engine. It is also a fact that the One-Way Valve becomes clogged and cannot control the internal pressure that may destroy the Engine.
Also, the water in the valve freezes and the product does not work in the winter;
It's mandatory to clean the Hyper Bulb regularly…
The installation is not self-sufficiency, but self-responsibility, so it is not a product that can be left in place, so those who cannot maintain it themselves should refrain from doing so;
The price is reasonable and the product is very effective.
Not sure about fuel economy.
View detail
WirusWin Hyper Valve
About quality and texture I don't know the quality Because it's my first time using this part About the feeling of use I feel less burdened by the engine Products to buy together internal diameter 6 mm rubber hose Difficulty of installation easy, simple Cost performance and comparison with other products I don't know what it'll be like because it's plastic About shipping and packaging Any concerns, cautions, or advice when purchasing Many people said they would use the 115cc engine to reduce the fatigue of the engine, so I bought it and now I just installed it, but I believe it will definitely work View detail
I might want one for my CT125.
I used it on my CT125CT110 HUNTER CUB.
As soon as the car was delivered, I immediately thought of the strength of the emblem.
By installing this, the awkwardness was considerably reduced.
Recommended for CT125.
View detail
I felt the Engine braking reduction!
I bought it because the engine braking was too dominant and difficult to ride in NORMAL.
As per other reviews, Engine braking reduction is certainly a change.
Smooth embracing and easy to handle.
I didn't expect it to be very effective, but it is worth the purchase.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
JC92 is difficult to install
I installed it on my JC92, but the position of the hose coming out of the engine seems to have been changed and it is quite difficult to do.
I didn't cut the Hose and snaked it to install it, considering Maintenance.
It is true that the engine braking has become milder, and the clunking at low speeds has become less frequent.
View detail
Cospa good
Engine feeling changed to Large. However, it has already installed NGKPlug, non-resistance Plug cap, and SP Takegawa's HYPERIgnition.
It sticks to the climbs that were Downshift from 5th gear. (Same speed) Also, since Axeloff's emblem is Mild, the next acceleration felt easier with Accelerator operation.
I think it's responding Smoothly because it can hold the embrasure.
But it is hard to put it on by yourself because it is behind the Cell.
If you have a rad pen with a bent tip, you can use BoltON without TubeCut. I use this Pattern.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Gradually after you put it on.
[How is it used?
It is a Touring MainSpec. but I bought it to drive on the mountain.
Was the one you received as per Image?
The product is a good product, solid as Image.
Was the installation difficult?
It was a Manufacturer product and was easy to install.
It was a bit of a pain to remove the Clip!
How was your experience with it?
When I first put it on, I didn't feel much, but...
Gradually, especially at high GEAR, the embrittlement is reduced.
If it's low and reverse - low speed, it's easy to ride.
[Included Parts:were they on?
It came with everything.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's good if the aim is right.
I used it for CRF150L. I think it could have been Universal Product instead of car model.
It is not particularly difficult to install, but you need to be careful because it is difficult to understand the direction of installation.
The engine is a single engine and the GEAR ratio is low, so there was a time when I felt that the BackTorque was strong, but when I installed it, I got a good feeling of the embracing condition as I aimed. The feeling may be different for each person, but I like it.
However, there are times when the Engine is not applied properly.
View detail
I need a place to mount it.
The engine does not decelerate like braking, so it is not jerky, but the installation location is under the box under the seat, so it is troublesome to get there. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
JC92 can also be used.
It can also be used with JC92.
It has the effect of reducing the BackTorque at the time of embracing.
It also improves dandruff.
This internal pressure control valve needs to be cleaned periodically because the valve sticking due to oil emulsion occurs.
I haven't taken it apart to check, so this isn't exactly accurate.
I think this Internal Pressure Control Valve is a self-weighting One-Way Valve. So it should be installed more than 45 degrees and ideally upright. If it is Lead Valve like Mr.Teramoto's T-REV, you don't need to worry about the angle, but I think the performance is better with self-weighted type. If you can get negative pressure of intake manifold, it is better;
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
moderately good
[How is it used? embrasure reduction
Was the one you received as per Image? Street Image
Was the installation difficult? It was easy.
How was your experience with it? It's easier to run.
[Included Parts:were they on? LargeIt was sturdy.
[Was there anything that disappointed you? There is not
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
SpeedDown on the embraces has been resolved!
As for installation, it was very easy because it only cut and interrupted Blowby which is connected to Air Cleaner Box from Engine head in the middle.
The stall caused by the engine braking during AxelOff has been alleviated and it has become very easy to ride.
Now we just need to hope for better fuel economy!
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Easy Custom
[How is it used?
It's like an engine. It's like a braking system.
Was the one you received as per Image?
Street Image
Was the installation difficult?
I had to install it in a tight spot. It wasn't easy.
How was your experience with it?
I hope you changed your mind.
[Included Parts:were they on?
I'm putting it on the picture.
[Was there anything that disappointed you?
None
Other items that would be helpful
It wasn't for the jc92, but I was able to install it.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
Hyper Bulb
I decided to buy the Grom Owner because it seems to have a lot of them. The emblem became Mild, the vibration was reduced, and it became easy to ride. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
pimp
It is easy with a pon. I don't know if I can feel the effect of using it because I don't ride much because it's been cold lately… I guess the durability is to come. View detail