WirusWin Motorcycle Engine Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

WirusWin

04 Mar 2024

Hyper Valve

Fits: SUZUKI GSX-R125

Japanese Webike user

5/5

In a sense, it is a cosmetic parts.

Response up, acceleration up, fuel efficiency at startup, and ease of embracement, etc. can be obtained. [Hyper Bulb]

[Hyper Bulb] ‥
Also known as. Decompression Valve." 1wayValve." Parts that can depressurize the inside of the crankcase, also called 。 Decompression Valve is apparently being introduced in the Race world as well!

How Hyper Bulb works and how it works. ‥
■Working ■
Power loss can be reduced by reducing pressure resistance in the crankcase.

■ Mechanisms ■
What is Hyper Bulb? ‥
Hyper Bulb is another name for Decompression Valve." Internal Pressure Control Valve 1wayValve." It is also called
The valve is in the middle of the Body passage. 。 When pressure builds up, the system pushes the Ball up to release the pressure.
Piston valve is tightened to relieve pressure during descent and to prevent backflow during ascent 。 Blowby gas flows in one direction to prevent backflow.
Example:Underwater. When On the ground. Which can run faster?
→ of course. On the ground. I would answer. 。
Underwater, the water pressure is so great that there is no way to run at the same speed as on the ground. 。 in other words Underwater, the pressure is so high that it slows them down." That means
The engine is constantly undergoing compression, and the pressure inside the crankcase is higher than the Large pressure. 。 This pressure becomes resistance (Pumping loss) 。 there Hyper Bulb. The use of the "C" in the Crankcase to maintain a negative pressure inside the Crankcase reduces resistance and prevents power loss in the engine.

■Merit■
Reduction of engine braking
● Improve Response
Improved fuel efficiency
Improved startability
Oil Life Up
Reduction of engine braking, response improvement, and startability improvement of engine parts by the decompression effect.

As a result, you can experience the effects of response up, improved startability, etc. 。 Improved fuel economy Reduced wasteful combustion leads to increased fuel economy 。 Oil Life Up reduces the burden on the engine and the damage to the oil. 。

■Demerit■
Cannot be disassembled for cleaning.

Winter is particularly frightening. 。 When the water in the Valve freezes
Since the pressure cannot be released, the pressure in the crankcase increases rapidly, and eventually the pressure becomes unbearable and the oil spurts out.

If you put it on backwards, it will lead to a Large accident. 。 There is also a life-threatening demerit→ that is, if you put it on backwards, the pressure will not be released.
There have been cases of fatal accidents. 。
Large change in which oil spurts out while driving, etc.

Cannot be disassembled and cleaned. Surprisingly fatal.
Blowby gas contains oil mist and moisture, so there is a high possibility of oil emulsification.
As a countermeasure, periodic disassembly and cleaning is necessary, but since this Hyper Bulb cannot be disassembled, it must be replaced periodically, etc.

You should also have a proper understanding of those Demerit before making a purchase.

Mounting Method
→Working time:It takes 5 minutes to do it (laughs).
Simply cut the middle of the OEM hose with scissors and install the Hyper Bulb in between (Instruction Manual included).

After installation
◎Improvement of Response Improvement
◎Idling vibration reduction
◎Engine braking reduced.
You will experience it immediately.

The downsides are disassembly and cleaning and the price (LOL).
I was like, "This small thing costs 6,000 yen! I thought (laugh).
But considering the cost effectiveness, I thought it would be cosmetic.
I know it is a bit of a stretch, but I think of it as wear-and-tear parts, like putting in expensive oil (laughs).
It is easy to install, so please use it as one of the custom parts for your motorcycle. View detail

WirusWin

06 Jul 2023

Hyper Valve

Fits: HONDA byte, HONDA byte, HONDA byte, HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus)

Japanese Webike user

5/5

Easier to run.

Installed on Byte. The work took less than 10 minutes.
The engine noise became quieter and acceleration smoother, and although the difference was minimal for a 50cc engine, the effect was clearly noticeable.
Although the engine braking is weakened due to the structure, it is not so much that it is dangerous, but rather that the feeling of falling forward due to the Axeloff is reduced, making it easier to ride.
I would highly recommend it to all ZOOMER drivers who share the same vehicle body. View detail

WirusWin

05 Apr 2023

Power Filter Kit

Fits: HONDA MONKEY125, HONDA Monkey 125

NO NAME

5/5

Integrates into the original intake tube for an easy install

About quality and texture, I can confirm that the quality is great and that the materials used are stainless steel tube for the intake manifold and a cotton gauze air filter pod. About the feeling of use, Integrates into the original intake tube for an easy install. The longer then normal intake manifold looks trick with the air filter pod positioned below the left side of the fuel tank and also allowing for a better power delivery. Products to buy together, While looks and performance are improved over the original setup the ability to use the bike in all types of weather is not. Either adding a water proof covering or changing the filter for one that is water proof would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the filter kit for my installation was easier then other filter kits due to the stainless steel intake manifold integrating into the original plastic intake tube making the connection onto the throttle body easy. Cost performance and comparison with other products, The pricing of this product is great even though slightly higher then what is available from most of the other brands. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail

WirusWin

30 Mar 2023

Hyper Valve

Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125

Japanese Webike user

5/5

this is astonishing

Product Name
Hyper Bulb

Item Number
W-825-6970

Vehicles
Grom (JC61)

Number of man-hours
About 30 minutes

Required Tools
Torque wrench, hexagon socket, Hexagon socket, -Driver, Pliers system,

Why did you choose this product?
I bought it because it was recommended to me by an acquaintance who is a Grom rider. I wondered if it was true because there were many effects that I had researched, but my interest was piqued and I decided to purchase it.
Was the one you received as per Image?
It was exactly as shown in the Image. It is a bit larger than I expected.
Was the installation difficult?
Installation was difficult. It took a long time because I had to install it around the small wiring area and the tools did not fit as well as I would have liked. I think it would be better not to cut the original rubber wire in case this product breaks.
How was your experience with it?
Emboiling has been reduced. Also, the fuel economy has improved a bit. From a commuter's point of view, I am very happy. It will take some time to get used to it at first because the embolement will be weakened. However, I was surprised that the ride quality changed so much with this smallest component. You should change this. It is not too much of a tool, so anyone can change it. I think you should hurry up to order it now that it is in stock. You can feel the change in the body of the car.
[Included Parts:were they on?
It came with a Sticker and I was satisfied with the high quality feel.
[Was there anything that disappointed you?
It seems that inspection is required, but it is also strange to remove the Large, so I would like it to be made so that inspection, etc. is not necessary.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail