Reviews
awesome!
Received the product in a big box with extra protection! Just fitted this on my SR400 and now it looks cleaner than before! quality is good and its easy to install too View detail
OEM Exhaust System will cause interference.
I think it is a good price for a Fender Eliminator Kit, but the blinker interferes with the Exhaust System if it is not an Exhaust System Up Type. View detail
It looks nice and neat, but you won't be able to bring it into an authorized Dealer.
Installation was somewhat difficult and the Instruction Manual was confusing.
The angle of the License Plate Holder is adjustable, but of course it is mounted at the proper angle.
However, the fact that it is installed with an adjustable angle in the first place is itself a Color:They are going to be in a Gray state. (From authorized Dealer, Engineering Dept.)
After I installed it, I filled the hex Screw holes with Pate and modified them so that they are not adjustable.
I would not recommend this to anyone who wants to bring it to a dealer for repair, etc., because it will be a problem if you have to remove it after installation.
However, it is a recommendation for those who do not care about the appearance of the Rear Area, and for those who install it at an appropriate angle.
View detail
I think it is a good product.
Easy to install, stable, good product. View detail
Accuracy?
I put it on a Cb250r.2019MODEL.
The holes in the bracket that attach to the body do not line up with the screw holes in the body.
As a stopgap measure, we deformed it with Pliers and installed it.
Therefore, BlinkerLeft is slightly distorted.
I'm not that picky, so I'll just bite the bullet and go with it.
I am disappointed in this accuracy as I purchased it for $10,000.
Also, the Instruction Manual is a single sheet of paper and quite unfriendly.
I referred to the blog of a kind person who purchased and installed another company's product.
There will be no more Repeat of products here in the future.
View detail
Fender eliminator
Quality of the product is awesome. Nice welding quality. Plug for the license plate LED fits perfect, no extra work required, cable is a bit long in my opinion. Installation on the bike was easy, the part has a perfect fit, and it looks great on the bike. Shipping was done super fast to Germany. Packaging was perfect, no damage could happen to the parts. View detail
Hmmm, they're cheap.
The Fender Eliminator was cool and I put it on.
After installation, I didn't really notice it, but it looks very cheap. It is worth the price.
I appreciated the included Parts.
If there is something else you are interested in, that would be fine too.
If you are cheap and want to put it on anyway, it is possible.
View detail
Not as described.
I bought this product because it said it was compatible with the '91 D Tracker, but the position of the screw fixing hole does not match.
To be honest, it was a waste of time.
If you are considering this for your old D Tracker, don't buy it.
It's a bit of an inch.
View detail
Refreshing
The LED License Plate Lamp did not work after 2 months. It's a shame that the LED license plate lamp stopped working after 2 months. I asked about it and was told that there is no compensation. View detail
Appearance Refreshing in Slim
I bought this product because it is Slim compared to other products.
The rear area has been refreshing a lot.
The installation itself is easy, but removing the OEMFender is pretty Large strange.
You need to push the Wiring into the body side, but I recommend you to remove the Helmet in to work on it because Harness is stopped by Bracket inside.
You can change the angle of Number. Please do so at your own risk.
If I were to write a few disappointments, they are as follows.
1.Color of Body
I personally would have been happy if it was Black instead of Silver because the body side is Black.
2.Reflector is not included.
The OEM Reflector is used, but the thickness of the Reflector impairs the overall sense of balance.
3.Waterproof processing of License Plate Light Wiring
I felt that the Wiring bare and Waterproof treatment was lacking.
I rolled Vinyl Tape because my Heat Shrink Tube didn't fit through it.
View detail
Quality products, includes wiring, plug and play, no cutting
This has all needed parts . Plug and play wiring. Looks good, all stainless steel. I put this on a 2022 USA spec grom, JC92. Angle of plate is adjustable, Notching required to mount plate in usa. View detail
The installation is a little Large strange.
The price is cheap, but the installation is large and strange. I would recommend this product to anyone who is new to customizing. View detail
Good vibes
I installed it on my 07 dTRACKER.
No drilling was required and Wiring was very easy as it can be popped on with the Coupler.
The Bolt that came with it was too short, so I bought another one that fits.
View detail
WirusWin no soil removal kit Japanese cars can also have a strong American style
The WirusWin soilless removal kit is suitable for Rebel 250/500 models, allowing the car to create a full visual impact of tires and show a strong American style after installation, but it will increase when riding on rainy days after removing the original wheel cover The possibility of muddy water splashing on the rear wheel, this is the only drawback that needs to be compromised to create a personal style! Recommended for you who like to be different! ---------------------- ------------------------ I bought their cycling jerseys before, and I recently planned to take a trip to a farther motorbike, so I bought a set of split raincoats for emergencies. The texture is relatively light and skin-friendly, and it does not take up space for storage. The back also adds a high-brightness night vision reflector, which greatly enhances the safety of night riding. The water splashing effect has been tried, and it is okay. The daily heavy rain should also be competent. Looking forward to the following Rainstorm riding waterproof effect! Powered by Google Translator View detail
Bracket cracked in a little over a year.
I bought SR400FI to use Fender Eliminator quickly and cheaply. I thought it was easy to install and seemed to be sturdy, but after a year or so, when I inspected the Number because it was shaking too much, I found that the Bracket part was cracked about half.
Even though it's cheap, I'm a little disappointed because I thought it would have a lifespan of about 5 years.
View detail
Fender Eliminator Kit
The SR Large Threshold OEM Rear Fender is now gone. View detail
Flaws not shown in the photos.
I bought this one as an experiment because I don't have a product detail picture.
Fender Eliminator, but it is unusually long and backward spaced, and the quantity:Pair (for Left and Right) It is very ugly with two Gold Bracelets in full view and full of gaps.
It's a shame because the quality and strength of the Bracket is solidly built.
I took it off immediately, put it back on NORMAL and sold it on Yahoo!
View detail
Inner is scuttling ・・・・・
Since the inner fender is removed, the inside of the tire house is not as good as it used to be, so I cut the Normal inner fender and put it on with just the included Bracket, License Plate Light and Reflector Bracket. Used.
Considering the inability to use the main plate and the processing of the Normal inner fender, the cost is not so good, so it is a little expensive, but it is a little bit more expensive than Quantity with Inner fender from other companies.:We recommend that you purchase the Set.
View detail
Dissatisfied
The OEM Blinker Coupler does not go through, although it is a compatible model
We can't even process it because of the steel;
We have no choice but to cut and process the wiring
View detail
Bank of lodging money lost
As others have commented, with OEMSeat, I can't see the tail lamp hidden
I was forced to buy a new Seat or a new Fender lessKit for myself with this It is
View detail