Reviews
The construction is also excellent!
I like the design and the quality of the product. View detail
It stands out
I bought it for customization rather than for its intended use. View detail
It looks different!
It needs some fine tuning. I had a hard time getting the Screw to fit easily in some places, but it installed beautifully ?I love the design! View detail
I like Parenthesis.
[How is it used?
It's cool with the installation.
Was the one you received as per Image?
Yes
Was the installation difficult?
Fine tuning is difficult.
How was your experience with it?
Backrest is good.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Instruction Manual should state that the problem is that some screw holes need to be adjusted.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400
Purchased as Pillion Bar for GRA MAJESTY 400
The feeling of sitting in the seat is still quite safe and secure because the back is guarded.:It is made of Stainless Steel for strength and reliability. Installation was done by a motorcycle shop. View detail
I'm not sure how long it will last.
I got a used FAZE with this Rear Carrier.
However, about six months after installing the rear box, I casually looked at the motorcycle and felt that the position of the rear box had been lowered, so I looked closely at the carrier and found that the base that attaches to the motorcycle body had been torn!
I understand that the vibration of the motorcycle will put a load on the base because there is no support from below due to its shape, but I never thought that it would happen.
And upon closer inspection, it seems that it was originally re-welded several times with the same symptoms….
I removed it as soon as possible and looked for another Carrier, but there were no parts (including used ones) that would fit the unpopular Carrier, which had already been discontinued for more than 10 years. However, there were no parts (including used ones) that fit the unpopular carriers that had already been discontinued for more than 10 years.
I could not imagine life without the Rear box, so I had no choice but to purchase the same product.
Currently, every time I get in and out of the car, I remove the rear box and check the base, but this is not good for my mental health, so I am thinking of having a local ironworker add a support from below.
The design and texture are very good, so this is the only disappointment.
View detail
Color does not match.
The colors included with the product did not match, so the front and rear were swapped and installed.
The texture and rigidity are very good. I am looking forward to seeing how well the texture holds up with use.
View detail
I think it's a good structure in terms of weightBalance
I have seen various reviews of this product by others (other sites) that say that a lightweight box is essential because of durability concerns.
However, this may be true for cars with poor balance, since each car model has its own method of fixing to the car body, but I think the position of the GEMMA's fixing part is a good structure in terms of weight balance.
I was relieved when I actually installed it. The welds look very sturdy.
As a result, we installed a 50L Large type box to improve the poor loading capacity of GEMMA.
The only dissatisfaction is the state of installation of the License Plate that was moved.
Vibrates with a buzzing sound during Idling.
I think there is room for improvement.-I will leave it at "1".
View detail
Fits: YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J)
Great
It takes about 13 days from order to arrival. View detail
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Good for Driver and good to buy
As per Title, the person driving will be at ease during Tandem.
That said, he said that it would reduce the anxiety of the person doing the Tandem considerably, and that there were at least three places to grab it.
This makes it easier to keep the weight in the middle and not worry about the Corner slipping down.
By doing so, the stability is increased and driving is much easier with it.
I'm impressed.
I'm sure you'll have to remove the rusty Nut when you install it.
I tried spraying it with anti rust Spray etc.
I used a solid wrench set that cost about 3000 yen.
I am a beginner, but it was not difficult to install.
I recommend it.
View detail
It's pretty handy for Tandem. It looks nice.
MAJESTYS' Tandem seat is getting more exciting! 。 The OEM Pillion Bar seems to be a little low and hard to hold. 。
This WirusWin Pillion Bar mounts on top of the OEM Pillion Bar so it doesn't look as bad and is easier to hold! 。
You can also choose LargeSmall backrest if you like. 。 Since it is made of Stainless Steel, you can polish it with PIKAL once in a while to make it more beautiful. 。
When I tandem with my child, I tie the sleeping bag between the backrest and the child's back, which seems to be quite stable and not scary.
It's not easy to rust, and it's made of stainless steel, so it feels sturdy and I'm happy with it. 。 The Backrest can also be used for a long time because it seems to be able to replace the Cover when it becomes obsolete.
View detail
Fits: YAMAHA Majesty S, YAMAHA SMAX
It's stainless steel, so it's got a nice texture. It looks great.
Bought for camping touring and Tandem touring. Still thinking about what to put on the box. 。 As I don't need a box when I commute to work, I decided to use WirusWin's product after much research, provided that the box does not look bad with the Carrier installed and the bar is within my son's reach. 。 I especially liked the fact that you can install the NORMAL Pillion Bar at the same time and that the MAJESTYS FORME does not collapse. 。 Stainless Steel is also beautifully buffed, and there are a lot of cheaper products from other companies, but they are all Black Steel and I didn't want to look like a commuter spec. 。 Balance was not bad in a straight line from the seat to the rear carrier 。 View detail
Fits: HONDA ZOOMERX, HONDA ZOOMERX
It's been 3 years since I bought it and the bracket was broken
Fatigue fracture by vibration immediately after purchase I welded it up and continued to use it, but today it was broken by a drill from another place than the reinforcement As expected, I gave up on Repair I'll buy another one View detail
It's easy to seat two people
I bought it because it was the best shape of the LEAD125 Backrest
My thoughts on the two-seater are
There is a Backrest for easy posture
The handle is easy to grip, unlike OEM products
Pad is soft and comfortable
There was a Merit called the Merit The handles were thick and the riding position was very stable and it was easy to ride long distances
Material is good so it does not rust The installation Bolt was a little reluctant to go around
View detail
It's a bit Large-textured, but it seems to FirmlyHold
The feeling of wearing it, a little Large texture
FirmlyHold it
I think I can safely seat my kids in the Tandem seat
View detail
What's Buffing not so good
I don't know where it's buffing
It's not mirrored at all
You shouldn't buy this one
Buffing yourself!
I wonder if it's really for swish only, as there's no Screw in the back
View detail
Gold genus fatigue in 1 year
Despite being compatible with the model, Nut position does not fit delicately and forcibly attached, even if you see Seat from the back there is a gap.
Gold genus is also thin because it is thin so we used it, but as expected, one year after using it, it has gone naturally due to Gold genus exhaustion! If you think that it was cut when you were riding, it is horrible.. I want you to return Gold !!!!
View detail
I think that it is quite sturdy
Since OEM carriers are already outstanding, there is only one thought to attach Carrier to FAZE. When searching with Net "Broken" Although there is a writing with, as you are wrote, I think that it is the cause of overworking with weight Over, so I am not particularly concerned with the part that I normally use. Since Grab Bar is easy to grasp, handling is also easier. Even if you look at the price, I think that it is conscientious because it is half the price of OEM View detail
Fits: KAWASAKI NINJA2 Helmet50RSL
Even if the Box is installed, opening and closing of the Rear seat is not sacrificed
It is a product which I was concerned about before purchasing kijima's Rear Carrier that I had attached so far.
Originally, since the price was about twice as large, I did not choose it, but since it was Sale.
The product is being stated as for Ninja 250 SL, but of course it was able to be installed in Z 250 S L.
The other person (For another car model, the same Manufacturer item) Although I was worried that the photograph with the weld surface broken was posted, check the welding place first, look at the delivered item.
Anyway, it looks like it is attached firmly.
However, the accompanying manual is not enough for other Manufacturers "Precautionary note of iron wall (lol)" It is written and it seems to me that something happened so much. (Although it is personal impression, after service can not be expected)
When installing, it is necessary to remove Tail part like kijima.
Tail is removed, Tail is returned by sandwiching the Parts of the Boomerang direction, and then the Carrier part to be Main is attached.
The accuracy is generally good, but the Screw hole "Exactly" And it was necessary to attach Screw for a momentary reason.
Also, although there is no way to secure this strength, since the part to be caught under the Rear seat is a bit thick, Rear seat does not fit unless you push it with a little effort.
Carrier (BoxBase) As long as I do not break as long as I do not know it.
Oh yes, Material : There is no need to worry about Rust with All Stainless Steel, but as expected there is weight as it is compared to Aluminum Carrier.
View detail
Bad product
Quality itself is fine but the welding part is bad and Body and Base are Gap.
When I inquire, I do it by visual inspection, so Gap replies with an ordinary response.
I am amazed already when I heard this word.
Products of this company will be gazing at everything by visual inspection and you will probably sell the goods of course.
It is about MADE IN CHINA to weld with welding.
I will never buy the goods of this company again.
View detail