Reviews
Fits: HONDA CT125・CT110 HUNTER CUB
Ponting and Custom
The overall construction is solid, and the welding and surface treatment are clean.
If you have a Hexagonal Wrench Set and a Driver, it will take about 30 minutes to complete.
There were no pictures of the inside in ManufacturerSite, so I personally used a mesh filter to prevent Garbage suction. (Gold web) DIY.
So, I personally ??Minus1.
View detail
Bounce Spring does not come on.
Design is Well, I guess that's about it." target
Personally, I like most of them, but I don't think they are very cool. Also, the flip-up spring, which can be used to fully open the seat after installation, which was available with the Normal seat, does not work with this seat. The plastic part of the hinge (integrated with the helmet box) was broken due to excessive force on the spring. So I had to replace the Helmet box at the same time as the Seat. The comfort is not as good as the NORMAL. It is claimed to be lowdown, but it is not so different from NORMAL. The quality is high. The installation is very easy. I think the accuracy is high and there is no wobble.
View detail
The construction is also excellent!
I like the design and the quality of the product. View detail
It looks different!
It needs some fine tuning. I had a hard time getting the Screw to fit easily in some places, but it installed beautifully ?I love the design! View detail
I like Parenthesis.
[How is it used?
It's cool with the installation.
Was the one you received as per Image?
Yes
Was the installation difficult?
Fine tuning is difficult.
How was your experience with it?
Backrest is good.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Instruction Manual should state that the problem is that some screw holes need to be adjusted.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I think it's a good structure in terms of weightBalance
I have seen various reviews of this product by others (other sites) that say that a lightweight box is essential because of durability concerns.
However, this may be true for cars with poor balance, since each car model has its own method of fixing to the car body, but I think the position of the GEMMA's fixing part is a good structure in terms of weight balance.
I was relieved when I actually installed it. The welds look very sturdy.
As a result, we installed a 50L Large type box to improve the poor loading capacity of GEMMA.
The only dissatisfaction is the state of installation of the License Plate that was moved.
Vibrates with a buzzing sound during Idling.
I think there is room for improvement.-I will leave it at "1".
View detail
Compact and solid presence
The OEM Air Cleaner Duct was installed in a highly waterproof location, but because of this, when strapping it to the carrier, the duct cover was in the way and there were areas where it was not possible to strap it on. I bought the duct cover because it was too bulky and when I removed it, I needed to plug the hole where the duct had been stuck.
The size is about the same as an OEM DuctHose cut in half, so it's not obtrusive, but it's also fashionable with a subtle statement.
The Stainless Steel polish looks better on a Red body than on a Khaki body.
The installation process is simple, but I think it is relatively easy since it is a step-by-step replacement of the Air cleanerFilter.
The fixing method is a pot bolt on a flange nut, but I applied Screw lock to prevent it from loosening.
View detail
Appearance Refreshing in Slim
I bought this product because it is Slim compared to other products.
The rear area has been refreshing a lot.
The installation itself is easy, but removing the OEMFender is pretty Large strange.
You need to push the Wiring into the body side, but I recommend you to remove the Helmet in to work on it because Harness is stopped by Bracket inside.
You can change the angle of Number. Please do so at your own risk.
If I were to write a few disappointments, they are as follows.
1.Color of Body
I personally would have been happy if it was Black instead of Silver because the body side is Black.
2.Reflector is not included.
The OEM Reflector is used, but the thickness of the Reflector impairs the overall sense of balance.
3.Waterproof processing of License Plate Light Wiring
I felt that the Wiring bare and Waterproof treatment was lacking.
I rolled Vinyl Tape because my Heat Shrink Tube didn't fit through it.
View detail
Good vibes
I installed it on my 07 dTRACKER.
No drilling was required and Wiring was very easy as it can be popped on with the Coupler.
The Bolt that came with it was too short, so I bought another one that fits.
View detail
It's pretty handy for Tandem. It looks nice.
MAJESTYS' Tandem seat is getting more exciting! 。 The OEM Pillion Bar seems to be a little low and hard to hold. 。
This WirusWin Pillion Bar mounts on top of the OEM Pillion Bar so it doesn't look as bad and is easier to hold! 。
You can also choose LargeSmall backrest if you like. 。 Since it is made of Stainless Steel, you can polish it with PIKAL once in a while to make it more beautiful. 。
When I tandem with my child, I tie the sleeping bag between the backrest and the child's back, which seems to be quite stable and not scary.
It's not easy to rust, and it's made of stainless steel, so it feels sturdy and I'm happy with it. 。 The Backrest can also be used for a long time because it seems to be able to replace the Cover when it becomes obsolete.
View detail
WirusWin no soil removal kit Japanese cars can also have a strong American style
The WirusWin soilless removal kit is suitable for Rebel 250/500 models, allowing the car to create a full visual impact of tires and show a strong American style after installation, but it will increase when riding on rainy days after removing the original wheel cover The possibility of muddy water splashing on the rear wheel, this is the only drawback that needs to be compromised to create a personal style! Recommended for you who like to be different! ---------------------- ------------------------ I bought their cycling jerseys before, and I recently planned to take a trip to a farther motorbike, so I bought a set of split raincoats for emergencies. The texture is relatively light and skin-friendly, and it does not take up space for storage. The back also adds a high-brightness night vision reflector, which greatly enhances the safety of night riding. The water splashing effect has been tried, and it is okay. The daily heavy rain should also be competent. Looking forward to the following Rainstorm riding waterproof effect! Powered by Google Translator View detail
Fender Eliminator Kit
The SR Large Threshold OEM Rear Fender is now gone. View detail
Fits: YAMAHA Majesty S, YAMAHA SMAX
It's stainless steel, so it's got a nice texture. It looks great.
Bought for camping touring and Tandem touring. Still thinking about what to put on the box. 。 As I don't need a box when I commute to work, I decided to use WirusWin's product after much research, provided that the box does not look bad with the Carrier installed and the bar is within my son's reach. 。 I especially liked the fact that you can install the NORMAL Pillion Bar at the same time and that the MAJESTYS FORME does not collapse. 。 Stainless Steel is also beautifully buffed, and there are a lot of cheaper products from other companies, but they are all Black Steel and I didn't want to look like a commuter spec. 。 Balance was not bad in a straight line from the seat to the rear carrier 。 View detail
It's a bit Large-textured, but it seems to FirmlyHold
The feeling of wearing it, a little Large texture
FirmlyHold it
I think I can safely seat my kids in the Tandem seat
View detail
The only one on the SR400FI? Products that can be pimped out
When I installed the Universal Bracket of the other company, the screw of the tank side was not used When it came to installation, I was worried about many things because the back stepped on Wiring hard & wobbly After searching for it, I found this product. for Carburetor seems to have a lot to offer! But this is the only FI car?
To install it, just move the rear suspension a little bit and put it in between the suspensions and assemble it It's easy to do
The position of the Seat seems to be difficult to heighten, but you can bite something on the Bolt of the Tank side or You can adjust it by making the bolts longer
Because the seatBody has a thin cushions, the buttocks may be painful when you drive for a long time However, the posture can be flexible to some extent because of the long nose
The Seat height is lower than the OEM, which gives you a lot more legroom You can move the Throttle in a parking lot or on an incline without turning it around and moving it as you ride, without getting yelled at You can move it in Switzerland and feel secure
Unfortunately, I couldn't install the Spring in the Seat Bracket You may be able to get some good processing suggestions if you ask
Buy a great product that goes great with CHIC DESIGN's vintage rear fender I think I could
The brackets are painted in matte black
View detail
Beautiful but a bit uncomfortable
Compared to the stock seat, you sit noticeably higher which changes your riding geometry. It feels more vintage. Long riding is less comfortable though since the seat barely has any cushion. It feels more like setting on a wooden chair. Moreover, the gap behind the seat is now visible so I cover it with a bag to hide that part. Anyway, it's fun to use this seat and puzzle other people what bike you have. View detail
I think that it is quite sturdy
Since OEM carriers are already outstanding, there is only one thought to attach Carrier to FAZE. When searching with Net "Broken" Although there is a writing with, as you are wrote, I think that it is the cause of overworking with weight Over, so I am not particularly concerned with the part that I normally use. Since Grab Bar is easy to grasp, handling is also easier. Even if you look at the price, I think that it is conscientious because it is half the price of OEM View detail
Fits: SUZUKI RV200 VANVAN, SUZUKI RV200 VANVAN
Purchased for '16 year VANVAN 200' s Blinker relocation
When KIJIMA's Rear Carrier is attached to VANVAN 200, Rear blinker will be attached to the front end of Rear Carrier, but in this position relationship Blinker will be hidden when loading a wide package on Carrier : Universal Rear Blinker Bracket Plate etc) to try to relocate Blinker. As a countermeasure, Type of Blinker Bracket that tightens with License Plate (POSH Faith Posh will interfere with Fender's Black plaque part. In order to solve this problem, this product (Type : I purchased Lucas tail lamp none).
Although the wrong item reached the wrong size of the L-shaped Gold tool, we got the correct item promptly and got the normal item, and the transfer of Blinker was also completed.
Depending on the Engine speed, the License Plate will shake quite well, so in order of installation (At the moment, as the screw was tightened in the order of Fender Eliminator Kit - Blinker Bracket - License Plate, there was a gap of about 2 mm between the License Plate and the Fender Eliminator kick, which may be the cause of vibration) We will review and review the purchase of the back plate of License Plate.
In addition, Reflector is not attached to this product and will be relocated from OEM Product.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL
Even if the Box is installed, opening and closing of the Rear seat is not sacrificed
It is a product which I was concerned about before purchasing kijima's Rear Carrier that I had attached so far.
Originally, since the price was about twice as large, I did not choose it, but since it was Sale.
The product is being stated as for Ninja 250 SL, but of course it was able to be installed in Z 250 S L.
The other person (For another car model, the same Manufacturer item) Although I was worried that the photograph with the weld surface broken was posted, check the welding place first, look at the delivered item.
Anyway, it looks like it is attached firmly.
However, the accompanying manual is not enough for other Manufacturers "Precautionary note of iron wall (lol)" It is written and it seems to me that something happened so much. (Although it is personal impression, after service can not be expected)
When installing, it is necessary to remove Tail part like kijima.
Tail is removed, Tail is returned by sandwiching the Parts of the Boomerang direction, and then the Carrier part to be Main is attached.
The accuracy is generally good, but the Screw hole "Exactly" And it was necessary to attach Screw for a momentary reason.
Also, although there is no way to secure this strength, since the part to be caught under the Rear seat is a bit thick, Rear seat does not fit unless you push it with a little effort.
Carrier (BoxBase) As long as I do not break as long as I do not know it.
Oh yes, Material : There is no need to worry about Rust with All Stainless Steel, but as expected there is weight as it is compared to Aluminum Carrier.
View detail
Construction is solid.
Used in conjunction with YamahaOption's Rear box.
The hole when attaching the base plate of Box is opened in the carrier
It seemed not to match Yamaha 's thing and it was necessary to reopen it separately.
It would not have been necessary to open it for GIVI or Ku Case.
The texture of Stainless is solid and quite good.
I regret that it became difficult to lock the Seat slightly after installation.
View detail