Reviews
Almost pontooned ??
Image didn't change as much as I thought it would. w
The seating comfort is about the same as OEMSeat!
View detail
The seat lock is hard, but overall I am satisfied.
We are 168cm 66kg with short legs and bought a new PCX160.
I knew I was on my toes at the time of the test drive, so I decided to buy it.
The product was not in stock at the time of order and took one month to be delivered.
The good:I feel like I'm 2cm lower, if not 3cm.
Satisfied that Helmet storage space is the same as standard Seat as described in ManufacturerSite.
Bad point:the rear is floating about 2 cm before applying Seat lock, but the lock is engaged by pushing hard.
I checked with the Manufacturer to be sure, but they said it is only a special order and that is normal.
Seat is still thin and buttocks are somewhat sore.
Overall, I recommend it because it holds Helmet storage space and improves the footing!
View detail
Color does not match.
The colors included with the product did not match, so the front and rear were swapped and installed.
The texture and rigidity are very good. I am looking forward to seeing how well the texture holds up with use.
View detail
Hmmm, they're cheap.
The Fender Eliminator was cool and I put it on.
After installation, I didn't really notice it, but it looks very cheap. It is worth the price.
I appreciated the included Parts.
If there is something else you are interested in, that would be fine too.
If you are cheap and want to put it on anyway, it is possible.
View detail
Refreshing
The LED License Plate Lamp did not work after 2 months. It's a shame that the LED license plate lamp stopped working after 2 months. I asked about it and was told that there is no compensation. View detail
The finish is subtle.
I installed it today and it has a very good footing.
But when I installed it and tried to unload the Seat and lock it.
It floats up quite a bit and you have to press it down firmly with your hand to lock it.
It's almost as if Seat itself is warping!
I don't have a lot of time, so I'll just use it and see how it goes.
And I don't see any place where you can make adjustments.
I'm worried that if I lock it, it will deform and fit snugly.
And when it rains, if you don't put the Seat cover on, the ventilation holes will let rainwater in!
The Instruction Manual says it, but I thought it would be better to do it without the Seat cover!
The rest is durability because I use it for commuting every day.
I also go touring in the vicinity occasionally, so I think I know how comfortable it is.
View detail
Flaws not shown in the photos.
I bought this one as an experiment because I don't have a product detail picture.
Fender Eliminator, but it is unusually long and backward spaced, and the quantity:Pair (for Left and Right) It is very ugly with two Gold Bracelets in full view and full of gaps.
It's a shame because the quality and strength of the Bracket is solidly built.
I took it off immediately, put it back on NORMAL and sold it on Yahoo!
View detail
Bank of lodging money lost
As others have commented, with OEMSeat, I can't see the tail lamp hidden
I was forced to buy a new Seat or a new Fender lessKit for myself with this It is
View detail
What's Buffing not so good
I don't know where it's buffing
It's not mirrored at all
You shouldn't buy this one
Buffing yourself!
I wonder if it's really for swish only, as there's no Screw in the back
View detail
I was able to lowdown
Work to remove and remove Rubber from OEMSeat was Large strange.
The texture is pretty good, what will happen on a rainy day ...
It seems that Seat is floating in the middle and its contents are visible ...
However, the target Lowdown was solid, and in OEMSeat the heels floated, became solid foot!
The removal of Seat is the same as OEMSeat.
This as well as OEMSeat still hurts when I run long distance ...
View detail
Gold genus fatigue in 1 year
Despite being compatible with the model, Nut position does not fit delicately and forcibly attached, even if you see Seat from the back there is a gap.
Gold genus is also thin because it is thin so we used it, but as expected, one year after using it, it has gone naturally due to Gold genus exhaustion! If you think that it was cut when you were riding, it is horrible.. I want you to return Gold !!!!
View detail
Mini bike can be better
Seat high is going down a lot and it is fun because movement is conveyed to Direct. A tour of 300 km / day can be ordinarily taken. Although asses will hurt in the second half, I think that Motorcycle is like that. View detail
nmax fender eliminator
a simple model with stainless steel material.need expertise to cut and to snap fit on it.as you can see from the picture. View detail
Installation is easy
KLX250 (2013) I am using it. I did not like the OEM's covered Tail lamp I bought it. Installation itself is simple and no problem, Rose ish is also Cool installed figure.
The problem is Harness. The BlinkerConnector and the Tail lampConnector are tightly fit and are Snap and Ponding, but it is not structured like a waterproof mechanism like an OEM, muddy and water wound by the Tire hangs on the Connector as it is I will. As this is an off car, or Motorcycle as a large defect, wrapped in a Vinyl bag and wrapped a number of heavy black vinyl Vinyl Tape and processed Waterproof. It was a real situation.
And there is no angle adjustment function of License Plate. Let's not use the explanation sentence.
Also, the Tail lamp is dark.
This is something I want to do.
It seems that Kit is issuing various kinds of vehicles, so I think that development is also Large, but I wanted it to be a mechanism that does not involve water at all.
I'm generally satisfied with overall.
View detail
Fits: KYMCO RacingKing180Fi, KYMCO RacingKing180Fi
Satisfied
Mounting on RACINGKing 180 i MotoCam. This Motorcycle has no Data at all yet!
Even if asking if it can be shared with the former type 180FI, confirmation can not be confirmed as installing Manufacturer anywhere
It is a reply. People who want to install Box can install it if you buy this Tandem bar.
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S, YAMAHA SMAX, YAMAHA Majesty S
Performance emphasis?
If you make a fine order, you should be able to adjust the BackHold back and forth.
The welded part is dirty.
I am a craftworkman, but it is cheap = not complicated - - -
I thought that I want you to manufacture with insistence.
Tandem is safe as it is solid without any play after installation.
View detail
Surprisingly undesirable
Although it is the installation to D-TRACKER-X, the installation itself is very easy. However, since the Spacer moves around when it is installed, it may be better to fix with the appropriate Double-sided Tape.
Although the shape of the tail lamp is as shown in the image, it is different from the sharp impression of D tracker X and it has a round shape, so there is a slight sense of discomfort. Also, if you install it as it is, the tail lamp will be far away from the rear fender, so it will make you a manukee impression. In the attached manual, I ordered the spacer to be placed on the tail lamp stay, but by placing it underneath, the gap between the rear fender can be relaxed somewhat. Instead, it usually stops at a total of 4 points - 2 screws and 2 points - but the 2 inlays will float. If you are concerned about strength, you need to devise. Although we are ignoring, we can use it normally without strange blur.
Personal opinion, MOTARD's Style is not NG. Design has no sharpness. Also, if only the shape is similar, the goods are nearly half-price so it will be good there. I think that the Fender Eliminator Kit of DRC is more in the style of D-TRACKER-X.
View detail
Cospa is so-so
Today, I installed it immediately.
Although it seems to be OEM in appearance shape, it is not good enough to make details, furthermore, the attachment part etc. Is slightly different,
It was necessary to fix it quite a bit..
SeatFront's plug-in Bracket is thin and rattling, Seib's back Rib is omitted in several places, SeatBody
I was wobbling, so I fixed it by attaching Urethane or Rubber sheet.
Also, the gap between SeatFront and Tank became large and it looked like it was not good.
Well, since it is the Other Company Product, I wonder if there is any difference between OEM and some - - -
Seat itself became considerably lower and improved with respect to the footsteps, but since Seat's Cushion is thinner by that much,
In the case of long distances, the hips may hurt?
Overall it is good, but a little more with OEMSeat etc. Three stars are the thing that I wanted the quality of.
View detail
It is unprocessed, and although it is attached, and I think that MSX is satisfactory, since there is the necessity of making processing or a Stay on one's own in attaching the Blinker of GROM, cautions are required.
It is unprocessed, and although it is attached, and I think that MSX is satisfactory, since there is the necessity of making processing or a Stay on one's own in attaching the Blinker of GROM, cautions are required. View detail
CK44 is equipped although it is CJ44 exclusive use. Although looks are the highest, in order to attach with a Belt cover by a Tapping screw, it is a fault that a hole opens to the Belt cover. It will interfere, if there are only
CK44 is equipped although it is CJ44 exclusive use.
Although
looks are the highest, in order to attach with a Belt cover by a Tapping screw, it is a fault that a hole opens to the
Belt cover.
It will interfere, if there are only about 2~3-mm skimmers with the Tire in a wearing state, they become in
and do not take out a Center correctly again.
Since
redo is not effective, either, it must be said that difficulty is quite high.
-- as [ interfere / at the time of a Bottom / with the Tire-house upper part / again ] --
-- by which a Wound goes into a side face instantly.
true and looks are perfect. -- It is unsatisfactory in respect of accuracy.
View detail