Reviews
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
Installation requires modification.
As shown in the product image, the OEM Carrier cannot be attached to the Flat, but the DoubleCarrier is attached on top, so it cannot be used in combination with the Second seat.
Even when not used in combination, the OEM Carrier interferes with the system, so modification was required to install the system.
View detail
Not as described.
I bought this product because it said it was compatible with the '91 D Tracker, but the position of the screw fixing hole does not match.
To be honest, it was a waste of time.
If you are considering this for your old D Tracker, don't buy it.
It's a bit of an inch.
View detail
out of the question
The 12-inches on the Address?125 raised the ride height of the car, so it was not possible to install it, although it was purchased to alleviate this.
To be precise, it could not match with the body of the car, and the back of the car was considerably floating. If you push in hard, you can lock Seat lock, but it is not practical.
During the trial and error process, I removed some Parts of Seat and couldn't even return it, so it was completely jammed.
Later on, I thought this might be for the 125S? I tried the Helmet In Box for the 125S and it installed beautifully...
I wasn't wrong about the matching model, but this is the situation. Please be careful.
View detail
Dissatisfied
The OEM Blinker Coupler does not go through, although it is a compatible model
We can't even process it because of the steel;
We have no choice but to cut and process the wiring
View detail
Fits: HONDA ZOOMERX, HONDA ZOOMERX
It's been 3 years since I bought it and the bracket was broken
Fatigue fracture by vibration immediately after purchase I welded it up and continued to use it, but today it was broken by a drill from another place than the reinforcement As expected, I gave up on Repair I'll buy another one View detail
I am leaning.
I purchased this product because it seemed to put the heaviest thing, but I will not straighten it.
Manufacturer also said OEM Carrier was not good in accuracy, so it was a reply that it can not be put out in parallel, but before that it is not straight ahead.
I was exchanged, but it was the same.
Although it looks good, when seeing from behind, Gap about 2 cm from the center line Parenthesis is too bad.
I think that it is good if I plan to fix it later.
View detail
This seat has a lowdown riding position that is very uncomfortable and dangerous because it makes u slide off the seat when braking. Also the riding position is such that your legs are always working to keep you in place on the scooter. They would not con
This seat has a lowdown riding position that is very uncomfortable and dangerous because it makes u slide off the seat when braking. Also the riding position is such that your legs are always working to keep you in place on the scooter. They would not consider an exchange. View detail