Reviews
Attached to Bore UPEngine
Installed on a LITTLE CUBFIEngine with 88CC bore.
It was installed without any problem, but when the Center Stand is raised vigorously, it hits the Exhaust System.
The Sound of with Baffle is my favorite, but people around me say it is too loud.
I was worried about the design and the Exhaust System Up Type, but I am glad I went with this one.
View detail
Recommended for those who focus on volume.
First of all, it is very difficult to tighten the Silencer bracket with the CharcoalCanister without removing the entire footpeg set.
To install the footpeg without removing the entire footpeg set, a palm-sized Small Type Swivel Ratchet can be used.
It may be for people who have a little bit of work sukill
I used to use BEAMS, so this is a comparison with BEAMS, but the good thing about BEAMS compared to BEAMS is that the baffle can be removed and it looks cooler (laughs).
If you remove the Baffle, it will sound like a stupid explosion.
It's all over the place and you can't make any progress at all.
I bought this because the BEAMS Exhaust System was too Large, but I returned to BEAMS after about a month,
If you are thinking of buying a new one, I recommend you to go for MORIWAKI for a little more than 10,000 yen!
View detail
Rod Silencer Exhaust System installed on MOTRA
The exhaust pipe of MOTRA's OEM exhaust system was rusted and broken, so I selected this exhaust system made by WILLS WIN from among the external exhaust systems. It is made of AllStainless and the goodness of the cost performance which can be bought at 10,000 yen was the decisive factor of purchase. I thought the appearance was quite good. The exhaust sound is not too loud and the exhaust pipe of MOTRA's OEM exhaust system was too thin and the maximum speed was only 55km/h. But after replacing it with this exhaust system, 60km/h is now possible. But after replacing it with this Exhaust System, 60km/h is now possible. (I have a Class 2 motorized vehicle registration.) The exhaust pipe near the Mount Bracket was cracked by vibration. I can give up because of the price. It might be because of the vibration of my engine. It is necessary to take measures against vibration. Please be responsible for your own use of this product. View detail
Fits: SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
It may not be enough for those who like a large sound.
It is a fairly quiet Exhaust System.
I thought about removing the baffle, but it looks like it's built-in and welded on, so I decided against it….
Good thing it's a neighborhood friendly Exhaust System sound. ( ´ ▽ ` )
View detail
Parenthesis OK
I bought this for my CUB. The style of installation is good! However, the top speed is down and the sound is too quiet. I think it's best for slow city driving, but not for touring etc... View detail
The texture is good, but the low-speed Torque...
[How is it used?
The OEM exhaust system of LITTLE CUB had the shape and sound of a CUB exhaust system, so we decided to customize it to change the taste a little.
[Was it as per Image?
The quality is good for the price, especially the exhaust pipe part, which has the unique color and luster of stainless steel compared to OEM plated steel. The exhaust pipes, in particular, have a nice color and luster unique to stainless steel compared to OEM plated steel.
Was the installation difficult?
The exhaust system body is lightweight, and the silencer and exhaust pipe are integrated into one unit, so there is no need to join them together. However, when replacing the exhaust system, make sure to replace the gasket with a new one.
How was your experience with it?
The sound quality has become a bit more bass-oriented with a single cylinder sound, and the volume has increased moderately. The sound quality and volume are not so loud that it is bothersome to the driver when driving in a normal environment. The overall length is also much shorter than the OEM exhaust system. However, the low speed Torque will drop after installation, so you may feel nervous from the time you stop until you reach a certain speed.
[Included Parts:were they on?
This Manufacturer's Material:AluminumEmblem came as an attachment, double-sided type.
[Was there anything that disappointed you?
I don't know if this is a product error or a problem with the car body, but when the Center Stand is raised, there is a clicking sound.
I saw that there was no contact with the Exhaust System, but the Brake pedal was touching, so I had to make a minor adjustment. I would like to make sure that the clearance with the car body is Large and strong during the temporary installation.
View detail
The sound is …
It looks good and the accuracy is good, but the sound is loud and high-pitched.
It was very different from the Image from the product description…
The sound can be Large Quantity to personal preference:Pair (for Left and Right) I'm sure you will, but I don't really like it.
As for driving performance, I can't say as I just installed it.
View detail
Exhaust System
I bought the Exhaust System. It's good. It's good. View detail
If you want to make a difference in your look, Recommendation
It was installed on my previous Rebel 250.
The appearance becomes better parenthesis, but the position of exhaust system is quite low, so it rubs immediately when tandeming.
View detail
You're too loud! It sounds good, though
First of all, with the OEM ride height, when you bank the lower part of the exhaust system to the Right Scrape the Hip up adapter 4cm at the same time as replacing the suspension It's something The look and sound quality is excellent for the price, but the volume is too loud I wouldn't be surprised if I was approached by the police at any time, but I'm in my 20s and I'm a young man, and I'm a bareheaded person with a young 20-something shield I'm riding around LOL (I'm using Yellow Color Number, so maybe I'm avoiding it
I have the impression that the exhaust venting is better than OEM so the car turns lightly I think the acceleration feeling is also better
As a result, I will RECOMMENDATION to a Small Child like me, but I'm going to have to face my neighbors We don't recommend to Large people like you ask!
View detail
good for the price
The sound is light and large, but the exhaust pipe part is short so the torque is not so much I don't think it is I think it's a good product if you like the look of it
Horizontal TypeEngine can be attached to some extent, I think
View detail
Power up
Easy to install, easy to install!
I was surprised that the sound was even louder than I expected, but
It's enough to make you feel the power up
I can now spin around without stress
If you're looking for a quiet exhaust system, beware
View detail
Cost performance is good
Down Because I was attaching suspension, I scrubbed the Exhaust System with a large step difference, the welding of the installation part was taken off, the muffler part was also removed by vibration, and it became straight pipe in one month View detail
Although there are some difficulties in installation, Quality is satisfied ♪
22 RACING of Re-ARAIs, Corn Oval of Mukawa ___ ___ 0
Purchase and purchase WirusWin Royal Exhaust EURO Type.
It is the result of judging Cost, Design, performance on the balance.
Re ARAIs is cheap in price, but it seems that it looks quite upward and abandons because Exhaust Bracket is Steel plate so it will be a cheap impression.
Make river Exhaust Bracket is Stainless Steel, but the appearance of Exhaust End is a solid impression, the performance is the best among the three, but the price is the highest abandoned.
WirusWin (Study only Euro Type from the beginning) Both Bracket and Stainless Steel, Exhaust End are made for FRPCover, it becomes sharp, it will be now a naughty design.
Upon arrival, Instruction Manual and Included Parts : Also well aligned, polite impression.
However - - - As I entered the installation work, Clearance with the Engine Mount was very narrow, and careful attention was required for installation.
I thought that it is impossible to honestly recommend the installation of those who have no experience with individuals.
After installation it is worth the effort, the appearance is very satisfying.
It is essential performance, but compared with Normal muffler (Ignition system, intake system NORMAL) And acceleration got better a little.
The fastest speed is the same as NORMAL.
Sound quality is slightly higher, there is no feeling like BALIBALI, it is about a bit cumbersome if there is no Inner silencer with a crisp sound..
I do not have complaints because I divide it for looks and sounds, rather than saying that it runs fast in the motorcycle where there is a car weight originally.
I think that it was good to choose this product.
View detail
Even though Fender Eliminator is also included and cospa rolls well, it looks like it will not hurt and I also like the shape Baffle I love the sound beyond my imagination.
Exhaust System I am looking for various things and I am looking for various things and the current Grom is still few kinds YOSHIMURA, OVER etc etc. Exhaust System High Exhaust System As it seems that Damage is likely to be present in the Exhaust System, it seems that Damage is likely to be removed easily, so I am worried about theft as opposed to being easy to remove, all the conditions have been cleared and a dedicated Fender Eliminator is also attached and the price is cheaper I also purchased the Design.
Because it is Baffle, I thought that it would be okay if I was too quiet if I was too quiet, it was a sound that I could not imagine 125cc, even with Baffle, I did not expect much performance, but high revivities became energetic but climbing uphill so far Plus 10 km I up.
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
I took time to install
Because it was Small swing, purchase.
The Screw hole of Bracket and Motorcycle did not delicately fit, and forced to lift the Silencer - part.
The tone is not so tasty, but 4st unique sound.
Because I changed my feeling and lightening, Yoshi!
View detail
Kick pedal hits you.
For MONKEY installation explanation, I wanted you to be easy even if you want it, for reference on CUB and DAX it is helpful, because Kick pedal also hits, so it's a while to replace it until you replace it View detail
Fits: SUZUKI ADDRESS V50 (4Cycle), SUZUKI LETS4
There was no O 2 sensor..
I bought it for LETS 4 and installed it.
There was something I knew at the moment we opened it, it's that there is no O2 Sensor's boss. I can not help it now I am running in the state of O2 Sensor hanging around (Aluminum foil wrapped around the sensor part). We plan to purchase and install O2 Sensor Canceler later.
Sounds are the best. I think that making it is also good.
I think that if you add Power Filter etc. to this and Set, you will get better appearance. (OEMAir cleaner + If it is this Exhaust System it is comparatively unbalanced - - - )
I will return the story but I wanted you to clearly indicate whether VERSION is Sensor boss or boss-less VERSION in the product information column. (Note that the same type of Exhaust System in WirusWin's HP is properly divided into two types with and without Sensor boss. )
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
Torque will fall.
WirusWin Rod Silencer Exhaust System is cheap, so I can exchange Dress-up easily, so I replaced it.
To OEM Muffler, PRE-WR 5. I replaced with 5 kg Belt and was satisfied with the acceleration and the highest speed, Torque fell as well. I thought of going back to OEM Muffler,
Exchange for WR 5 kg. Both acceleration and maximum speed became quite impressive. Next time 4. I would like to exchange 3 kgs.
The idea that it would be quicker if Muffler was replaced was delicious.
View detail
Unable to find a bolt on option for my 1981 Yamaha TT250, I took a gamble and purchased this pipe since it was reasonably priced - especially for a complete system. The header bolted up no problems, whilst the muffler mount did need a little tweaking - th
Unable to find a bolt on option for my 1981 Yamaha TT250, I took a gamble and purchased this pipe since it was reasonably priced - especially for a complete system. The header bolted up no problems, whilst the muffler mount did need a little tweaking - the system fitted the bike fairly well, with no leaks and a great note. However the 38mm header is huge, given that the muffler is quite restrictive - I would definitely say a more 'open' style, big bore exhaust would work better with that sized header... View detail