Reviews
GSX-S125 and YOSHIMURA are also acceptable
[How is it used?
Tandem Footpeg removal for weight reduction.
Was the one you received as per Image?
Material:Aluminum and lightweight, it served its purpose.
Was the installation difficult?
I am a beginner, but no problem. It may be an individual difference, but the welding part on the Bracket Exhaust System side slightly interfered with the exhaust bracket, so I installed two 0.5mm washers between them.
How was your experience with it?
In addition to the weight reduction purpose, I liked the look of the Race ish.
[Included Parts:were they on?
Manufacturer logo batch, instruction manual
[Was there anything that disappointed you?
Nothing special. The other company's Black board type looked good, but I think this one is also Race ish.
YOSHIMURA was OK, but there may be individual differences, so it may be safer to prepare a washer for adjustment.
View detail
Appearance Refreshing
I was looking for a bracket for a while to remove the OEM footpeg, but I bought this one. The position of the exhaust bracket is slightly offset from the OEM position. View detail
High quality finish
The weld marks are also beautifully finished. It has a high-class feel. View detail
crisp
OEMExhaust System was replaced because it was too large.
The crisp, single-cylinder exhaust sound is now more pronounced!
View detail
OEMExhaust System had a hole in it, so it was replaced.
I got a Yamaha VOX50 from an acquaintance and while servicing it, I found a hole in the OEM exhaust system, so I decided to replace it. I was looking for a custom exhaust system and found one that was reasonably priced and looked good, so I bought it. I was satisfied with the volume and sound quality. View detail
For 17 years.
I bought the same Exhaust System 17 years ago at a local store and installed it myself.
I was looking for a new exhaust system for my Silencer when the weld cracked.
The sound is still the same and quite quiet.
Good looking, good price.
I also appreciate the fact that you can sell me an Exhaust System that fits my 36 year old Motorcycle (HA02), which is the same age as mine, for a long period of time.
View detail
Short Exhaust System with crisp sound
Installed on a JA55.
I like the Short look! (Exhaust pipe part was personally painted) 。
Japan Government Certificated is not, but Baffle is a Quantity:2pc. If a Set is installed, it is Large and not noisy.
There is a little interference near the Silencer when the Right leg is lowered.
It may be better to take measures with ThermoVantage or Heat Guard of Universal nature.
The basic replacement process is the same as for other Exhaust Systems.
However, the band that holds the Silencer in place is quite hard, and without vise pliers, etc., it is a struggle.
View detail
I'm happy with the result, but the installation might be strange for Large.
I asked a nearby Shop to install it, but the installation work seemed to be Large strange.
First of all, the Exhaust System was supposed to be an Exclusive Design product, but when it was installed, the Exhaust System hit the Step Board of the Body and could not be installed (the removed Step Board could not be put back on) &arrarr; He had no choice but to cut the contact part of the Step Board round.
Then, the Bolt for the mounting bracket was 1 pc too short and could not be attached &arrarr; I used a longer Bolt from the shop.
As a result, I am satisfied with the color, style, and sound, but I am a little disappointed that the installation is Large strange.
View detail
Attached to Bore UPEngine
Installed on a LITTLE CUBFIEngine with 88CC bore.
It was installed without any problem, but when the Center Stand is raised vigorously, it hits the Exhaust System.
The Sound of with Baffle is my favorite, but people around me say it is too loud.
I was worried about the design and the Exhaust System Up Type, but I am glad I went with this one.
View detail
Top quality, looks great
This is a top quality item. The welding is handmade and strong. The look is perfect for the bike. The new spar weight 150g, the pair of pillion supports it replaced weight 1500g, a big improvement. The piece fit perfectly to the standard exhaust and frame, millimetre perfect. Great value-for-money, thanks Webike and Wirus Win! View detail
Focus on appearance
Product Description. Sound good." I think it is Large sturdy even without Baffle.
I'm happy with the look of the product this time.
View detail
Cool looking Exhaust System
Sound quality is very good
Without Baffle is a little noisy.
Might be a little annoying to drive in a residential area.
View detail
The unique look of the WirusWin exhaust was what sold me on the product
About quality and texture, I can confirm that the quality is great and that the materials used are tube stainless steel for the exhaust system and plate stainless steel for the license plate relocation kit.About the feeling of use, The unique look of the WirusWin exhaust was what sold me on the product but I am very impressed with the quality of the build and sound it produces. Products to buy together, WirusWin have an open air cleaner kit for the Grom that would be ideal to also add to your cart to complete the basic performance upgrades. Difficulty of installation, I can say the fitment of the exhaust system was easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike, the license plate relocation kit was a little more involved due to the wiring. Cost performance and comparison with other products, The pricing of the product is great. You receive an exhaust system that is made using high quality stainless steel material and has a high quality surface finish. Cheaper exhaust systems are available but for a little extra this exhaust system was my choice. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Sharp Exhaust System for CUB was installed on MOTRA.
The Rod Silencer Exhaust System that was previously installed on my MOTRA broke, so I purchased the Sharp Exhaust System for CUB from Wills WIN and installed it on my MOTRA. The exhaust bracket bolt for CUB was cut off because it interferes with the Brake pedal arm. However, since the mounting bolt is gone, we have to consider how to mount the silencer. I found a Silencer band that I could use from the parts I had on hand, and I was able to install it by modifying a long nut and Universal Stainless Steel Bracket in kind. When I started the engine immediately, I heard a nice thick IdolRing sound. However, when the Throttle is turned up, it makes an explosive noise. I drove the car for a while, but the noise was so loud that I felt sick when I was driving. So, I made my own Baffle and installed it. With this, I was able to reduce the exhaust noise to a level that would not disturb the neighbors. I like the SMART design of the carburetor. I think it is a good material for a custom base with good cost performance. The current engine is for JAZZ, and MOTRA does not supply OEM parts, so I have no choice but to use the same engine to keep it running. The result is a very satisfying one. If you want to copy this, please do it at your own risk. View detail
Recommended for those who focus on volume.
First of all, it is very difficult to tighten the Silencer bracket with the CharcoalCanister without removing the entire footpeg set.
To install the footpeg without removing the entire footpeg set, a palm-sized Small Type Swivel Ratchet can be used.
It may be for people who have a little bit of work sukill
I used to use BEAMS, so this is a comparison with BEAMS, but the good thing about BEAMS compared to BEAMS is that the baffle can be removed and it looks cooler (laughs).
If you remove the Baffle, it will sound like a stupid explosion.
It's all over the place and you can't make any progress at all.
I bought this because the BEAMS Exhaust System was too Large, but I returned to BEAMS after about a month,
If you are thinking of buying a new one, I recommend you to go for MORIWAKI for a little more than 10,000 yen!
View detail
Rod Silencer Exhaust System installed on MOTRA
The exhaust pipe of MOTRA's OEM exhaust system was rusted and broken, so I selected this exhaust system made by WILLS WIN from among the external exhaust systems. It is made of AllStainless and the goodness of the cost performance which can be bought at 10,000 yen was the decisive factor of purchase. I thought the appearance was quite good. The exhaust sound is not too loud and the exhaust pipe of MOTRA's OEM exhaust system was too thin and the maximum speed was only 55km/h. But after replacing it with this exhaust system, 60km/h is now possible. But after replacing it with this Exhaust System, 60km/h is now possible. (I have a Class 2 motorized vehicle registration.) The exhaust pipe near the Mount Bracket was cracked by vibration. I can give up because of the price. It might be because of the vibration of my engine. It is necessary to take measures against vibration. Please be responsible for your own use of this product. View detail
just right
I like it very much.
The sound is just right (my opinion) and comfortable.
View detail
Fits: SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
It may not be enough for those who like a large sound.
It is a fairly quiet Exhaust System.
I thought about removing the baffle, but it looks like it's built-in and welded on, so I decided against it….
Good thing it's a neighborhood friendly Exhaust System sound. ( ´ ▽ ` )
View detail
Parenthesis OK
I bought this for my CUB. The style of installation is good! However, the top speed is down and the sound is too quiet. I think it's best for slow city driving, but not for touring etc... View detail
No neighborhood nuisance
The OEMExhaust System has been dented since I bought the Motorcycle used.
I've always been concerned about it, and this time I decided to change the Exhaust System anyway.
Slash Cut Exhaust System is our main goal to customize.
I had ordered it, but had to wait 4 months for an undecided delivery date.
The dented exhaust system is about to start rusting and it is finally starting to look bad.
Slash Cut Exhaust System is a product of Cancellation and Kochira.
I chose it.
I really wanted to change the entire exhaust system, but decided against it.
This product arrived quickly and I changed it as soon as it arrived.
Gasket also came with it, which was helpful.
However, if you force the assembly, the Gasket will be torn to pieces.
I think it will be.
I inserted the Gasket in the back, shifting it little by little.
As for the sound, there were 2Patterns and neither had any complaints.
But if I didn't turn on the Baffle, the sound would echo in the neighborhood.
I put on Baffle.
Still, I was very pleased with the satisfactory sound and appearance.
View detail