Reviews
Appearance Refreshing
I was looking for a bracket for a while to remove the OEM footpeg, but I bought this one. The position of the exhaust bracket is slightly offset from the OEM position. View detail
High quality finish
The weld marks are also beautifully finished. It has a high-class feel. View detail
OEMExhaust System had a hole in it, so it was replaced.
I got a Yamaha VOX50 from an acquaintance and while servicing it, I found a hole in the OEM exhaust system, so I decided to replace it. I was looking for a custom exhaust system and found one that was reasonably priced and looked good, so I bought it. I was satisfied with the volume and sound quality. View detail
Focus on appearance
Product Description. Sound good." I think it is Large sturdy even without Baffle.
I'm happy with the look of the product this time.
View detail
LITTLE CUB WirusWin WirusWin Rod Silencer Exhaust System
Idling sound is good with crisp and not too low bass. The volume is about the same as the exhaust system. When you turn it up, the sound is more high pitched for a CUB. It sounds like a common moped?
Considering the price, I think it is perfect.
[How is it used?
I wanted to add some color as a replacement for the rotten Normal muffler.
Was the one you received as per Image?
The quality of the Stainless Steel was better than Image with good welds and a nice finish.
Was the installation difficult?
Small type, completely bolt-on, no interference at all.
How was your experience with it?
Idling sound is good. When you turn it, you can hear the sound of gold, which is typical of Stainless Steel. No strange vibration and safe to ride.
[Included Parts:were they on?
One Washer, Emblem and Sticker
[Was there anything that disappointed you?
I had expected it to be quiet, but I chose it after reading some reviews that said it was quiet, but as expected, the sound is considerably more loud than OEM, and I was concerned about the Level at night in a residential area.
[ITEMS TO BUY TOGETHER
Let's just buy Gasket.
View detail
Overall, I like it.
Installed on a 2015 KF18
When temporarily assembled, the bracket and thailand core attachment points do not match.
Slowly tighten each Bolt to a slightly aggressive fit.
A little inaccurate?
The attached Bolt is also made of steel and will soon have Rust.
To be replaced by Stainless
The included Nut was also unusable due to size mismatch, so OEM was reused.
I think Parenthesis sounds and looks good.
Inner Cone and Baffle were added so
I honestly can't feel if the performance has improved.
Satisfied with Fashion
View detail
There are few options, so it's WirusWin or its affiliate, Asakura.
I put this on my XCH50 (AY02) VINO. The review of the problems during and after installation is written, but I was Large sturdy. No exhaust leakage. I wonder if there is a difference. However, since I had it installed at a shop along with other maintenance work, I am not sure how Large the work was. However, I did not hear that it interfered with any part in particular, or that the shape did not fit, so I do not think there was any problem.
I am quite satisfied with the appearance. It looks cute and cool. The sound would be better if it were a little lower pitched, but it is only 50cc, so I am satisfied considering that point.
Inner baffle and exhaust outlet baffle, Quantity:2pc. If the engine has not been modified, the inner baffle is installed because the Instruction Manual says that the inner baffle provides more power. If the exhaust baffle is removed, it is large enough to be used during the daytime. However, if it is removed in a residential area at night, it will be seen as "white". I really want to remove it.
I have been thinking about various replacements such as bore up, pulley replacement, etc., because it was troublesome and expensive, and also because I thought that I would probably tinker too much and end up with power down, more frequent engine oil changes, and lower durability of the engine itself. I have decided to replace the Exhaust System only. The rest of the system is normal. I do not feel any valley in Torque, and the maximum speed is 61 on flat road and 50 on uphill. As you know, the Meter shows less than the actual measurement, so I measured it with the phone app.
View detail
Exhaust System for XTZ125 (Slip-on Silencer) What is the effect of the exchange?
I bought it for its design and high functionality.
Installation can be done in an hour with plenty of time to spare, partly due to its specialized structure.
As for Design, I am satisfied.
However, the performance improvement is not so great as to be drastically different due to the SmallEngine Displacement Volume and the low power output of the machine, and it is better to separate the emphasis from Silhouette.
Basically, since it was immediately after the Sprocket change, it may be impossible to compare the effects.
At any rate, I think the cost-effectiveness is that the Style will look good and the texture is nice.
View detail
A little noisy but satisfactory Exhaust System
I installed it on my Honda Giorno AF70 and the Torque and Power are much higher than the OEM Exhaust System. I think it is good for those who do mini bike race because of the power at high rpm range.
However, you might want to be a little careful during Engine startup time, etc., as it can be a blast. I had a neighbor get mad at me for being too noisy … lol.
The design is Refreshing and the product is a total Recommendation!
View detail
It is moderately loud, but the performance is not quite there yet…
[How is it used?
I purchased this for Step up from NORMAL.
Was the one you received as per Image?
The Exhaust System was smaller than expected.
Was the installation difficult?
The Exhaust System itself is small and light, so it can be installed easily.
How was your experience with it?
The volume is moderate, and it looks and feels customized, but no performance increase is expected.
[Included Parts:were they on?
Bracket required for installation was included.
[Was there anything that disappointed you?
The volume went up, but I did not feel any performance increase.
Nothing else in particular.
Power may increase from NORMAL, but those who have already changed to an external exhaust system, etc. may not experience power increase.
View detail
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation. If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached. since -- please exchange for the parts of on
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation.
If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached.
since -- please exchange for the parts of only the side stands of an external article.
Since side stands and a center stand were both use, I cut the bracket.
A price is attractive above all.
View detail
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation. If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached. since -- please exchange for the parts of on
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation.
If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached.
since -- please exchange for the parts of only the side stands of an external article.
Since side stands and a center stand were both use, I cut the bracket.
A price is attractive above all.
View detail
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation. If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached. since -- please exchange for the parts of on
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation.
If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached.
since -- please exchange for the parts of only the side stands of an external article.
Since side stands and a center stand were both use, I cut the bracket.
A price is attractive above all.
View detail
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation. If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached. since -- please exchange for the parts of on
Appearance feels it refreshed and it is COOL!! Sound was a little louder than anticipation.
If attachment is a center stand, its right-hand side bracket will be obstructive, and it will not be attached.
since -- please exchange for the parts of only the side stands of an external article.
Since side stands and a center stand were both use, I cut the bracket.
A price is attractive above all.
View detail
FashionExhaust System?
I put it on my co-MAJESTY.
I had decided to go with the OEM exhaust system for my Scooter, but after the car didn't notice me and I was in danger and the OEM was getting corroded, I took the plunge and changed it.
It's a product, but you can't rely on Net rumors.
The finish is good, the fitting is good, and the sound quality is good.
If you put on the attached Baffle, the volume is about OEM+α, just right.
It is attached without any difficulty.
Performance, but not as good as OEM.
FashionExhaust System.
But it doesn't mean that the performance will decrease so much. It may be, but I don't do it because I don't want that much.
The price is reasonable and Recommendation.
The people who say WirusWin is on Net information must be people who have never bought it or people who bought it used.
View detail
Quiet American motorcycle
I replaced the exhaust system with a KITACO certified exhaust system! It was very easy to install (maybe a little hard for a beginner) and I think anyone who has a little bit of experience can easily replace it. The most important thing to remember is that you can run your engine in a residential area without worrying about your surroundings because it is quiet. I'm not the type of person who rides a motorcycle with a lot of noise, so I feel like I've found the Exactly Exhaust System for me, and I love it. View detail
Stylish and Large Bold Volume
I was looking for a short exhaust system with good parenthesis and I found this one. The volume is a little loud with the 88cc engine, but it is better than the exhaust system I had before. The carburetor setting is not so good so I can't say about the performance yet but I am satisfied with the look. I wish I could lower the volume a little more.
If you put it on and run, it will gradually get browned.
View detail
Good~
First of all, the sound of the muffler is so good. And the small and cute shape made Zoomer even cuter. The disadvantage is that the speed has decreased a little, but I don't care because the beauty of the exterior is greater. View detail
![Atomic Twin Exhaust System[Full Exhaust System]](https://global.webike-cdn.net/photo/impression/ad/ad2dbdb7fc7ecd26964f9e3b19a9c007L.jpg)
Fits: HONDA Grom (MSX125)
Design is the best!
I like the design of this bike, the center two-piece looks like a high class motorcycle. Everyone who has seen it says it's a good parenthesis.
In terms of driving, it seems to be TorqueDown instead of extending the high rpm a little, but it is within the expectation.
The sound was a little too large for my liking. (Lol) Personally, I feel it is too noisy even if I wear two Baffles, but it is good for those who like the sound of Large fineness. If you like large sound, this is good.
If you are familiar with the installation, the exhaust system replacement itself takes 10 minutes and the Fender Eliminator Kit installation takes 30 minutes.
It takes a little hang to adjust the mounting angle of the rear blinker.
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
It's quieter than I thought.
I installed Bore up and High Camshaft and assembled.
When I ran the engine, the exhaust system was quieter than I expected.
Compared to the Normal muffler, the sound is more Large.
It's not a deafening sound, so I'm going to give it a full throttle when I'm done breaking it in.
Of course, I'm going to register it as a two-class moped.
View detail