Reviews
Cospar good
Used in 250TR
Installation accuracy is decent
There is no instruction manual, but if you have experience with the exhaust system replacement, you should have no problem
Unexpectedly, there is not much clearance with the ground Mine had the Rear suspension down 3cm, so it's only 5cm I rubbed it when I laid it down a little bit on a little bump or even Corner
I'm currently riding back to Normal suspension
If you remove the Baffle, it is the sound quality that has a pulse feeling, and I like it better than with Baffle However, the sound becomes a little bit loud I feel depressed in the warmth of the morning (It depends on the individual.) 。
View detail
Inexpensive and improved performance!
It was inexpensive, so I bought it for MAJESTYs to save weight Installation of the Sensor was possible without any problem except for the removal and installation of the O2 price I think that it is quite difficult to remove the Sensor with ordinary MONKEY etc It is very hard to loosen the sensor with normal MONKEY etc I am only for heavy machinery? I managed to get loose with the extra-largeMONKEY of
To be honest, I wasn't expecting too much performance because the price is the price, but I'm not sure if it's going to run well I think it came to blow up smallish from the bottom When the system was used, the lower torque was not so good, but after I changed to this, the luck of Axel was reduced Are you feeling better? I think the low speed Torque, as well as the mid to high speed, is now pleasant If I wanted to, I think it would be faster if I could boil down the fuel economy properly (this is good enough for me) (in Buddhism)
If you remove the Baffle, the sound will come out better It's too much and the torques are gone and slowed down in the whole area The sound quality without Baffle is very loud and annoying to the neighbors The sound quality without Baffle is like a low temperature mains booming sound and with Baffle it's a bit more loud On the contrary, it's a dry sound like ParaParaPara in the high-pitched Main
The driving performance was improved, but the gasoline meter dropped to the extent that it became faster Speed seems to have gotten faster I cannot say with certainty because I have not measured the fuel consumption yet, but I want to measure the fuel consumption with full refueling later I think
View detail
I love it!
The pipe was very easy to install. The sound is very deep on the Yamaha XC155. It is a little loud, but I love it. It was worth every penny. View detail
Fits: SUZUKI ST250, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
Cheap build quality
Looks great but less than a month on the bike and something has broken loose inside the muffler. No way to get to it without grinding away the welds. It's a shame because I was pretty fond of itm. Will be putting the OEM exhaust back on until I find something better. View detail
Cost performance is good
Down Because I was attaching suspension, I scrubbed the Exhaust System with a large step difference, the welding of the installation part was taken off, the muffler part was also removed by vibration, and it became straight pipe in one month View detail
it's the best
Sounds also look better
COSPA is good.
It's a bit noisy if you do not have a Baffle
It was better if the Instruction Manual is a little easier to see
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
Win 'ROD' virus
Installed on a 2006 Honda Today AF61. Compared with the stock exhaust, the 'ROD' weighs practically nothing! Surprisingly (for the price), the quality is outstanding. Nice welding around the tip and the stainless finish has held up well so far even in bad weather. The included mounting system is sturdy and very simple to install, and included all the necessary bolts. View detail
Although there are some difficulties in installation, Quality is satisfied ♪
22 RACING of Re-ARAIs, Corn Oval of Mukawa ___ ___ 0
Purchase and purchase WirusWin Royal Exhaust EURO Type.
It is the result of judging Cost, Design, performance on the balance.
Re ARAIs is cheap in price, but it seems that it looks quite upward and abandons because Exhaust Bracket is Steel plate so it will be a cheap impression.
Make river Exhaust Bracket is Stainless Steel, but the appearance of Exhaust End is a solid impression, the performance is the best among the three, but the price is the highest abandoned.
WirusWin (Study only Euro Type from the beginning) Both Bracket and Stainless Steel, Exhaust End are made for FRPCover, it becomes sharp, it will be now a naughty design.
Upon arrival, Instruction Manual and Included Parts : Also well aligned, polite impression.
However - - - As I entered the installation work, Clearance with the Engine Mount was very narrow, and careful attention was required for installation.
I thought that it is impossible to honestly recommend the installation of those who have no experience with individuals.
After installation it is worth the effort, the appearance is very satisfying.
It is essential performance, but compared with Normal muffler (Ignition system, intake system NORMAL) And acceleration got better a little.
The fastest speed is the same as NORMAL.
Sound quality is slightly higher, there is no feeling like BALIBALI, it is about a bit cumbersome if there is no Inner silencer with a crisp sound..
I do not have complaints because I divide it for looks and sounds, rather than saying that it runs fast in the motorcycle where there is a car weight originally.
I think that it was good to choose this product.
View detail
WirusWin Side By Side Exhaust Jet Type
WirusWin Jet Type exhaust is TOP QUALITY product. Sound is very heavy bass. Jet Type looks super and sound super! Easy to assembly. I'm very happy for product. View detail
Good look and lightness
I bought for SUPER CUB 50, initially attached to 50 standard, after 90 Custom.
Both inspiration is NORMAL.
Good place, cheap things, Material : Stainless Steel, although it is not measured, the weight is lighter compared to OEM Weighing below Spring Weight properly rise up properly (Lol) And it looks Short. Beauty is the finish of welding traces and appearance.
50 Large minute Torque feeling will be thinner. 90 just feeling good.
In exchange, the volume is Large, the Baffle attached comes with a sense of muffled with a light sound quality / There is no degree. Together with the Power Filter, inspiration and exhaust have become similar sounds (Lol)
It was originally attached to 90 Custom Bracket was able to attach a pon because of its long hole originally. Volume and sound quality do not change.
Even if 50 and 90 do not change the Carburetor setting, it will not turn unnoticable so perhaps the missing in Large width may not change, but it will surely be lighter than NORMAL's rush.
I think that the Exhaust System for CUB is also good in cheap things because well-known docomo is quite good price. Just stick to the sound (Both volume and sound quality) Please be careful.
View detail
Easy installation!
First of all, if you try to loosen the installation Screw to remove the O2 Sensor from the OEMExhaust System, the Wiring Code will be twisted together (Naturally?!?)
As shown in the photograph, first remove the Right Side's Coupler out of the two in the Side cover, then slacken the Sensor installation Screw, you can remove Sensor to Smooth without difficulty.
Three locations are fixed in the OEMExhaust System, but the installation work of the Exhaust System Body is very simple because the exhaust system is shortened to the Slim and fixed at two points. The essential exhaust sound was previously satisfied with the look and sound as well as the sound of the WirusWin's Exhaust System installed in the SR 400, so we decided to compare this with the things of other companies after all.
Because the Exhaust System Body is considerably located at the bottom of the car body, in the Right bank, if you attack the severe, the Exhaust System contacts the road surface before the footpeg, and somewhat disappointing that if the price is a bit cheaper. (Let's not attack Corner too much at REBEL. Haha) On the other hand, the point which was good was that the OEMExhaust System was decking and it was overhanging to the Right Side, so the narrow Garage at my house could not be helped by disturbing it at the time of passing, but this was no longer jamming in Slim Was (^_^) /
View detail
Attach the Taste Exhaust System to ADDRESS V50
I like the performance and shape very much, but it is so noisy that complaints arise as it is a dense residential house where the sound is big enough. Sound quality is medium, occasionally, if the Exhaust System is cold it will cause an afterburn.
I think Silencer is a little longer and π is Large.
View detail
Wirus Win - MSX SF - Perfect fit!
Fantastic Product. Well packaged, minor trim of rear fender, otherwise perfect fit. Sound with/without baffle - minor change - but still noticeable - i decided to use the baffles in both sides. Header, join, both mufflers are of very high quality. For those, comparing to the Wirus Win Dual, for the older MSX this sits FURTHER apart, due to space required for the tip over sensor. Another note - the supplied number plate frame "angle" is too much, the LED light shines direct into rear traffic. I decided NOT to use the supplied frame and used a generic (adjustable) tail tidy to suit. Very happy with the tone and quality. :) View detail
Super-explosive sound
It turns neatly upward, but there is not a low-speed Torque because it is coming out too much. Characteristics do not match in Mini bike Circuit. It would be nice if you keep it fully open like Minimoto ... View detail
Even though Fender Eliminator is also included and cospa rolls well, it looks like it will not hurt and I also like the shape Baffle I love the sound beyond my imagination.
Exhaust System I am looking for various things and I am looking for various things and the current Grom is still few kinds YOSHIMURA, OVER etc etc. Exhaust System High Exhaust System As it seems that Damage is likely to be present in the Exhaust System, it seems that Damage is likely to be removed easily, so I am worried about theft as opposed to being easy to remove, all the conditions have been cleared and a dedicated Fender Eliminator is also attached and the price is cheaper I also purchased the Design.
Because it is Baffle, I thought that it would be okay if I was too quiet if I was too quiet, it was a sound that I could not imagine 125cc, even with Baffle, I did not expect much performance, but high revivities became energetic but climbing uphill so far Plus 10 km I up.
View detail
Wirus Win Atomic Twin Exhaust System
The Wirus Win Atomic exhaust is one of the sexiest MSX/GROM exhausts on the market. It has a high quality finish - just look at those welds !! Super easy to install - (even with the japanese instructions). Aside from the full exhaust system, it also comes with a number plate / indicator bracket which looks great & doesn't detract from the exhaust itself. And that exhaust note - ringa ding.ding.ding NO MORE !! View detail
Good for the price!
It is not good for price!
It has been over two years since wearing but Rust, hole, Troubleetc. There is nothing! (Stainless Steel, the structure is simple, so w)
When removing the Rear tire for a short time it is not necessary to remove the Exhaust System or anything, so it is easy to maintain w
Even after Bore up, I remove Baffle and use it. Even if Engine's power goes up it's not a problem.
Well, it sounds worse, I do not hear a sound like 50cc w I think that it is fairly Large
Bass is working awfully w
Unlike explosive sounds like ears hurting like the straight pipe Exhaust System, it is loud and dull with loud volume.
Well, even so, early in the morning, residential streets at midnight somewhat care about you ~
View detail
Bracket of installation is opposite
Although the goods arrived, I am in trouble because the reply does not come even if I think that the installed Bracket is the other way around.
Size is not included and it is not yet put in
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
I took time to install
Because it was Small swing, purchase.
The Screw hole of Bracket and Motorcycle did not delicately fit, and forced to lift the Silencer - part.
The tone is not so tasty, but 4st unique sound.
Because I changed my feeling and lightening, Yoshi!
View detail
Because I exchanged the Exhaust System for the first time
I tried it because it arrived today
The model is CD 50
When attaching to the Bracket of the CD 50, it will not match the hole and the Exhaust System interferes with Brake
Forcibly pushed inwards and a gap of about 1 mm was available but is this such a product?
Perhaps it is incorrect to put it in the wrong way but it is surprisingly utopia
View detail