Reviews
Fits: YAMAHA X-1, YAMAHA MATE NEWS, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA MATE50, YAMAHA MATE NEWS, YAMAHA MATE50, YAMAHA MATE NEWS, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA MATE NEWS, YAMAHA MATE50, YAMAHA YB-1 FOUR, YAMAHA MATE80, YAMAHA V80, YAMAHA YB50, YAMAHA MATE50, YAMAHA YB-1, YAMAHA YB-1, YAMAHA MATE NEWS
The Tread pattern of Rear changes sibilantly even for the same product name.
[How is it used?
After acquiring a year-old SUPER CUB and performing a hanghangRestore, the Tire was replaced when it was finally ready to be driven on public roads.
I want to put longitudinal groove tires on the front tires of the SUPER CUB." After much consideration, we decided to go with Dunlop's D107 because of its affordability and availability, and since the front tire is a D107, we decided to use the same product for the rear tire.
Was the one you received as per Image?
Although both front and rear tires have the same product name, the rear tire is not a vertical groove pattern, but a CLASSIC pattern that reminds me of TT-100GP, one of the most popular Dunlop Tire, which is a good parenthesis tire. It was an ideal tire for me, and I had nothing but pleasure from it.
Was the installation difficult?
Thanks to the softness of the tire itself and the thinness of Size, the tire replacement itself is an easy task.
If you have done tire replacement or puncture repair on a bicycle before, you can do this work without any problems, and the difficulty level is relatively low.
How was your experience with it?
Very ordinary Tire.
On Dry road surface CUB. (As CUB owners know, the footpeg is a Fixed Type, so if you try too hard, the footpeg may catch on the ground and become dangerous.)
I think the balance of the tire is also good because I can ride normally without slipping on rainy days, perhaps because I ride while weighing myself even more.
However, if you want to do Circuit driving or sharp driving with SUPER CUB, it would be better to use another Tire.
[Included Parts:were they on?
Rear tire only.
[Was there anything that disappointed you?
Nothing in my personal opinion.
I think this product has a relatively low wear rate in the SUPER CUB of yesteryear, and it is easy to obtain even at rural motorcycle shops, and the design of the tire pattern combined with the CLASSICMotorcycle-like atmosphere is created, and the parenthesis feels good. I feel it is a good parenthesis.
Other items that would be helpful
Point and hang of installation
When assembling, do not be in a hurry and work carefully so as not to damage the Tube.
Video by Siteetc. SUPER CUB Tire Replacement If you are still not confident, do not hesitate to ask PRO for help.
[Notes]
This tire does not specify the direction of rotation, but for those that do, follow the direction of rotation arrow markings on the side of the tire.
[ITEMS TO BUY TOGETHER
If Tire is life time, Tube and Rim Band is also life time, Tire & Tube & Rim Band is Quantity:Let's buy them in a Set and Refresh them all at once.
[Opinions and requests to Manufacturer
As long as the SUPER CUB of yesteryear exists in this world, we look forward to long-lasting sales.
View detail
Even an amateur can replace the chain. (However, 27mm Glasses are required.)
Recommended Chain Replacement Tool for DIY.
Chain replacement tools range from those that cost 40,000-50,000 yen to those that cost less than 5,000 yen. To be honest, I was hesitant about the price because I use them very infrequently (maybe not even twice), but I was sure of their quality and the official videos on how to use them. I'd rather buy something for $4,000 and have it fail." I bought it with the feeling of
You can replace it without mistake by following the instructions as shown in the official video.
The point that I had a hard time was that there were no 27mm Glasses, so I used MONKEY as a substitute, which made it difficult to fix the body, which is important, and I could not use force, etc. 27mm Glasses are essential to fix the body securely. I will definitely prepare 27mm glasses next time I use it.
The 19mm turning side can be adequately handled by the Box and Ratchet Handlebar.
It is also good that the OtherParts are sold in bulk. I experienced the pin removal process for the first time, but I feel it is inevitable that I will make a mistake and bend it someday.
If you are going to replace the Chain yourself, I don't think there is an option below this (price), so I think the Cost performance is sufficient.
View detail
Fits: KAWASAKI GPz1100, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, その他 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R
Constructed on Z1
I was using another company's BOOSTER for light intensity measures for car inspections, but it had a large relay near the battery and I had a hard time finding space to install it, The Pams BOOSTER cost less than other companies, but it fits in the headlight case, so I am satisfied with it.
I don't know about durability yet, as I just installed it.
View detail
BIGSize!!
I use it to fix sub-computers, voltmeters, oil temperature meters, thermometers… and other electronic devices that I have installed in my car. It is easy to attach and detach, yet it is very strong! View detail
A tech under cowl
I ordered this for my 2023 z125. It fits perfectly. Really makes it stand out from the stock look. Love the product. Highly recommend to anyone that's interested. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
Required but impressed
The stock springs are far to soft and the lifter plate is cheap and is known to crack if you use stiffer springs. Replaced with this high quality item. It immediatley changed the feel of the clutch and in my opinion is now how it should of been from the factory. View detail
Fits: HONDA GROM, HONDA MSX125, HONDA CT125, HONDA GROM, HONDA SUPER CUBC125, HONDA MSX125SF, HONDA MONKEY125
Takegawa Quality
Looking to mod the bike in the future so whilst servicing the bike cleaning the spinner and gauze this upgrade makes sense. Provides more flow than OEM and is so simple to replace. As always Takegawa parts are reliable and of high quality. If you are increasing the CC of your bike you need one of these View detail
Yoshimura Bling
I ecpected this to be just another keyring. It is but with Yoshimura quality even down to the packaging its A*. Now I've got rid of the dealer keyring and replaced with this elite keyring. Made from premium materials. Embossed on both sides as well. The actual ring is very rigid and needed quite some effort to mount it to the bike key View detail
Easy upgrade
This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail
Light, beautiful, and powerful. It is truly a brilliant exhaust system!
[How is it used?
Normal muffler weighed more than 10kg, so we wanted to lighten the weight of the car as much as possible, and the normal exhaust pipe would quickly turn brown and discolored. The style of the exhaust pipe is Normal look, lightweight, and beautiful color.
Was the one you received as per Image?
I was surprised that the box was larger than expected, but the catalyst is stored in the Silencer, so the box is large.
Was the installation difficult?
The three-part design allows for flexibility and easy installation.
YOSHIMURAOne piece is heavy and large, but this one is light and can be easily installed because it is divided into three parts.
How was your experience with it?
The volume is louder than normal, but you can feel the torque increase from low speeds. I could feel more acceleration in the high rpm range.
In fact, the PowerCheck Graph on the ManufacturerSite shows a significant increase over NORMAL, so I don't think it is my imagination.
Also, Center Stand can be used and Oil replacement can be done without inconvenience.
[Included Parts:were they on?
Gas Repo, Instruction Manual, Center stand stopper, Springetc., all necessary items are included.
[Was there anything that disappointed you?
I think WYVERN Exhaust for CB1100RS is better looking with Megaphone type.
▼ YOSHIMURA's Hand BentTitaniumMegaphone Exhaust has a shorter tube length and WYVERN Exhaust has a longer tube length, which is suitable for power up.
Also, the exhaust pipe does not protrude, making it compatible with an external Fender.
View detail
Volume control
[How is it used?
The volume of the external exhaust system that came with the used car when I bought it was too loud,
After Fire was also available at the same time, so it was purchased for exhaust adjustment purposes.
Was the one you received as per Image?
The size error was very small, and it was possible to mount the unit on a pontoon.
However, in our case, it will be installed in the exhaust pipe side of the exhaust system,
Drilling + Rivet fixation.
Was the installation difficult?
In the case of our vehicle, the exhaust system was inserted into the exhaust pipe,
The fact that we could not bolt on was something we could have anticipated,
Also, I had all the necessary tools on hand for processing,
It wasn't a difficult task.
We have an O2 sensor attached to the exhaust pipe on our vehicle,
It was also necessary to machine the contact points with a hole saw.
How was your experience with it?
I was able to reduce the volume from the original explosions,
For starting up (when cold), the volume is still too loud to be noticed in residential areas,
Once the Engine is started, it is ready to go.
[Included Parts:were they on?
Quantity:I bought 2pcs, but one of them had a bolt nut that came off,
It was playing in the bag.
However, it is not visible once it is installed,
I'm not talking about the scratches.
[Was there anything that disappointed you?
none in particular
Other items that would be helpful
At the very least, measure the inside diameter of the piping at the planned installation location before purchasing.
For those who intend to install the product by themselves, some manufacturing errors should also be taken into account,
It is advisable to have some processing tools and liquid gas available.
View detail
Processing is beautiful
Bolt and Shim will be provided separately.
M10×25?Pitch1.5 and M10×25?Pitch1.25 are available.
The processing is beautiful and the rigidity seems solid.
I would have liked Bolt and Shim to be included if possible.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Active Rear Caliper support
Purchased this for the Swing Arm and to replace it with a Brembo caliper. View detail
It's good to have the self-satisfaction of using BremboOEM's Titaniumium pad pin.
[How is it used?
After many years of use, the Coe?? Stainless Steel Pad Pin was experiencing paint peeling due to friction and color change due to baking.
Therefore, we replaced it with this Titaniumium pad pin, which is a Brembo OEM part.
My vehicle has been replaced with NorthLine caliper support, BremboRacing caliper, ZCOO brake pads, and BRAKING 320mm brake rotor.
Was the one you received as per Image?
The dull shine of Titanium was more luxurious than the Image in the picture.
The Brembo is a little lighter than the Brembo. The Brembo is lighter than the Brembo in terms of weight.
Was the installation difficult?
It was not difficult.
Even amateurs can replace them if they have Pliers.
How was your experience with it?
I honestly don't know since the weight reduction is in tens of Grams?
It is good because I can indulge in the self-satisfaction of using Titanium.
[Included Parts:were they on?
Clip to stop Pad pin is included.
(It is in the attached image.)
[Was there anything that disappointed you?
I was not disappointed. I did not expect the weight reduction due to the fact that the parts are small in size.
Installation Point or hang
Tension Spring Tools allow for easy removal and installation without scratching.
Availability and clarity of Instruction Manual
Instruction Manual is not included. It is not a complex component that should be included.
important point
It would be good if you do not neglect to visually check and test run the Clip to make sure it is inserted securely.
Items to buy together
As mentioned above, Tension Spring Tools.
Opinions and requests to Manufacturer
Not particularly
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Master cap
Just by replacing it, it looks and feels better. Good texture. View detail
LightOnOff switch purchased and installed at Shop
It is also convenient to install a switch with a light ON/OFF function. View detail
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
rumor that appears to be quite true (rumour)
Replacement from FoldingLever in U Canaya.
The Kanaya Lever itself is a good one, but I replaced it because it had a fall damage since I bought the body and I did not like the Straight shape very much.
In comparison to Kanaya Lever,
The gentle bend at the base of the lever allows for more freedom in where you place your fingers.
As sung in the advertisement, the lever is gently curved so that it is soft to the touch when you hold it.
Both Levers are about the same thickness.
It was like that.
As the previous reputation suggests, I think the feature of the Largeest is the gentleness of touch when you hold it.
It is truly a lever for city driving and touring.
Those who want a Solid Touch or Sporty feel will not meet with many people, so the Straight shape is better.
View detail
No complaints ??
Good accuracy/quality,
It can be adjusted more finely than NORMAL,
It also increases operability.
Basically, if you follow the Instruction Manual, there is no problem,
Only Brake switch,
Some PedalPositions may need to be crafted.
The structure is simple and can be made as small as desired,
I don't think it is a Larged issue.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R-900R, KAWASAKI GPZ750R
Ideal for Wound and Crack Hiding
Material of this Manufacturer:This was my first purchase of Carbon products and I am very satisfied with the quality.
First of all, it may be a bad point, or perhaps it is unavoidable due to the nature of the material, but you should not expect the fitting to fit the side cover exactly as if it were OEM.
It's not bad, but when you match one point of chili to another point of chili, the other point may not match, or there are parts where there is inevitably a gap when laminating with Double-sided Tape, … Level is not a concern if you move a little away from the car body.
The first good point is that it looks cool.
This is the best way to hide NINJA's unique side cover cracks.
Our Side cover also had a cracked One Side, but it was hidden by Beauty.
The Instruction Manual was also in color and the content was very clear and helpful.
And the warranty is generous even for such a small product!
De Fault comes with a one-year warranty, which shows A-TECH's commitment to manufacturing.
In the future, if Material:I wanted to make A-TECH my first choice when looking for Carbon products.
View detail