Reviews
![Main Jet [MIKUNI Hexagonal Type/Large]](https://global.webike-cdn.net/photo/article/00/1214476930800L.jpg)
Fits: YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TZR125
It is used for M type of RGV250gamma. Since pure #280 [ bigger ] was contained when the carburetor was OH(ed), it returned to #260 of the manual value. Although goods are treated as a kitaco, in the touch which looked at the stamp etc., it seems t
It is used for M type of RGV250gamma.
Since pure #280 [ bigger ] was contained when the carburetor was OH(ed), it returned to #260 of the manual value.
Although goods are treated as a kitaco, in the touch which looked at the stamp etc., it seems that contents are the same as the pure product made from a mikuni.
Probably, it is an unavoidable place since accuracy is parts of a life, although it is as high as 500 yen per piece.
It seems that there are a jet, a needle, and a case where a tune will return if the inner parts of a carburetor are used as a new article in the case of an old motorcycle since it will wear out if it is used for years.
moreover -- Vgamma is the relation to which the carburetor of the order bank is shifted and attached unlike NSR etc., and jetting of a carburetor is different by right and left in many cases -- right and left -- I think that at least M type was the same.
We recommend you a model, SP / to purchase, after checking by a manual, since it is scattering at all even when it is normal.
View detail
Since it is a low price of a price, and a muffler of a silencer type, it chooses. The gasket is also attached and I thought that he was kind. The exhaust sound written also with good 1. is quiet! Safe also in the residential area of night.
Since it is a low price of a price, and a muffler of a silencer type, it chooses.
The gasket is also attached and I thought that he was kind.
The exhaust sound written also with good 1. is quiet! Safe also in the residential area of night.
2. Since the silencer came to the lowest place of the center of gravity, a cutback became light.
When a 1. baffle is removed, it is explosive sound roaring.
A gap is too large.
2. There is only one spring which connects a silencer and an exhaust pipe.
He is worried whether a burden is placed on the opposite side and it leads to breakage.
O A semi-racing baffle is not an accessory but an option.
View detail
Since the clutch cable of XR100 motard was being broken, this product for APE was diverted. There was no part which poses especially a problem when attaching, and bolt-on was possible. Although it is a question about why it is a stainless mesh alt
Since the clutch cable of XR100 motard was being broken, this product for APE was diverted.
There was no part which poses especially a problem when attaching, and bolt-on was possible.
Although it is a question about why it is a stainless mesh although it is a cable type, a pure twist also becomes a light operation feeling and is very well pleasing.
Since the master under the clutch of a photograph is a hand brake, it is not related to this product (smile).
View detail
There was a rigid feeling, when a guide peg was put on a step, there were few wobbles, and the firm riding position was able to be taken. Convenient, since an order of safety related parts can also be performed. Since he did not like privately tha
There was a rigid feeling, when a guide peg was put on a step, there were few wobbles, and the firm riding position was able to be taken.
Convenient, since an order of safety related parts can also be performed.
Since he did not like privately that a step bar was too long if only one was said, it was estimated as four stars.
View detail
Although these parts are attached and the effect has not been demonstrated yet, if it will be protected when it stands and there is GOKE, sense of security is welcomed. The moriwaki of structure is good, and appearance is also united with the motorcyc
Although these parts are attached and the effect has not been demonstrated yet, if it will be protected when it stands and there is GOKE, sense of security is welcomed.
The moriwaki of structure is good, and appearance is also united with the motorcycle as nonchalantly, and it is very much pleased with it.
View detail
Since it arrived today, it equips. it is at the zephyr 400 -- incidentally . Although written on touch which removes and sticks a loading hook to a description, it equipped with the loading hook using the color which suited for ZRX400. He has
Since it arrived today, it equips.
it is at the zephyr 400 -- incidentally .
Although written on touch which removes and sticks a loading hook to a description, it equipped with the loading hook using the color which suited for ZRX400.
He has no problem, although interfered in a hook a little.
View detail
Since there is much area covered, the worries about a crack disappear. Moreover, since it is carbon, appearance is also good. if there is no it since even free does not have somewhat quite satisfactory fitting and a crevice is made between a tank
Since there is much area covered, the worries about a crack disappear.
Moreover, since it is carbon, appearance is also good.
if there is no it since even free does not have somewhat quite satisfactory fitting and a crevice is made between a tank and a cover as for it -- * -- it is five.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
The gadget which can attach easily only by exchanging for a pure cap, and can perform dress-up up and oil-temperature management. Since there are no snap ring pliers at hand, since the dial face is not corrected, it is somewhat stupid touch.
The gadget which can attach easily only by exchanging for a pure cap, and can perform dress-up up and oil-temperature management.
Since there are no snap ring pliers at hand, since the dial face is not corrected, it is somewhat stupid touch.
View detail
First of all, the handiness of a price and form are smart. Since it is covered with a half-cap and he thinks fundamentally that it is good by easy serious consideration, about that point, it is this goods recommendation! It is easy to follow a jaw str
First of all, the handiness of a price and form are smart.
Since it is covered with a half-cap and he thinks fundamentally that it is good by easy serious consideration, about that point, it is this goods recommendation! It is easy to follow a jaw string and one-touch.
There are also several kinds of sizes, the thing suitable for itself can be chosen, it wears, and a feeling is a psycho! In the case of, it is used when riding on a scooter.
a motorcycle is ridden, covering sunglasses over this! saying -- it is -- ~
View detail
M8xL25xP1.25 is used for a Zep750+ new style crab (phi 34) (support and a torque rod are the products made from specifications engineering). Since a bolt end interferes in a rotor, the head end is made for it to be good exactly, if there is a thing of
M8xL25xP1.25 is used for a Zep750+ new style crab (phi 34) (support and a torque rod are the products made from specifications engineering).
Since a bolt end interferes in a rotor, the head end is made for it to be good exactly, if there is a thing of L20, but to bite color (5 mm thickness).
I think that crime prevention nature is higher than a usual cap bolt and torque.
View detail
Zep750+BREMBO casting It is used. Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active). Incidentally with the ph
Zep750+BREMBO casting It is used.
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the photograph, M10xL25xP1.5 (for BREMBO) is used for the caliper side (the bottom is an ordinary cap bolt, respectively).
Although there is little sizing, they are the goods considered well.
View detail
Fits: SUZUKI Let's [CA1KA] 1998, SUZUKI Let's [CA1KA] 1997, SUZUKI Let's [CA1KA] 1996, SUZUKI Verde., SUZUKI Verde., SUZUKI Verde., SUZUKI Verde., SUZUKI Verde., SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke)
It purchased targeting the maximum high-speed up of the let's 2. The attachment was able to do the screw simply except KATAI. The beginning became good as Mr. Daytona said the comment which ran. A little maximum high speed was also raised.
It purchased targeting the maximum high-speed up of the let's 2.
The attachment was able to do the screw simply except KATAI.
The beginning became good as Mr. Daytona said the comment which ran.
A little maximum high speed was also raised.
Since a weight roller continues being normal, if setting is issued firmly, I will think whether to be extended to a slight degree.
View detail
It is always used for pulley desorption of yamaha JOGZ-2 (SA04J). It should be able to be used in common with the 50~100-cc scooter of a yamaha. Although it is used very well for a long time, I would like to write the comment to embezzle. * Si
It is always used for pulley desorption of yamaha JOGZ-2 (SA04J).
It should be able to be used in common with the 50~100-cc scooter of a yamaha.
Although it is used very well for a long time, I would like to write the comment to embezzle.
* Since it hooks on the gear (crown type parts) of * kick a good place and can fix, although it is large to a band type pulley holder, especially,
It does not say damaging the feather of a drive face or giving a wound, and desorption is possible, without putting a burden on a pulley or a drive face.
Moreover, since big torque can be applied, can't it respond to the nut liable to [ which had been neglected for a long time ] adhesion, either, without sliding by a gear meshing?
Since a gear is only engaged also when using it, the time and effort of loosening or binding tight is not taken, but we recommend it strongly to especially those that desorb a pulley frequently.
* Since glasses wrenches cannot be used when loosening * nut a bad place or binding tight, a socket wrench etc. are needed.
Moreover, since the mountain of the gear (crown type parts) of a kick may be becoming more round and more round, tabling may become sweet and it may slip if it is used for a long time, please use it, pressing down by hand firmly.
Others are not found a bad place now in particular.
As a general comment, if a price is cheap to a slight degree, it is five stars without a complaint, but since there is no dissatisfaction in particular individually for Kon, I will consider it as four stars.
To those who make maintenance of a drive-line frequent, if you refer to the above, I am pleased.
View detail
When he wanted the titanium muffler and it considered many things, this was able to be recommended from Schopp's person. A reason is two. Seemingly if the engine performance is this price level, each is neither barrel the better herring, but they
When he wanted the titanium muffler and it considered many things, this was able to be recommended from Schopp's person.
A reason is two.
Seemingly if the engine performance is this price level, each is neither barrel the better herring, but they say that structure is beautiful and this muffler is highly complete for the time being.
Say that a manufacturer's correspondence of second is very good.
It is whether although there are other popular manufacturers, the difference in a view to the user of a manufacturer side has come out of them too.
Since it was the voice of the actual spot, he bought this with no problem.
Of course, it is large satisfaction.
Sound, a general view, and performance were as expected.
Although there are no objections from me yet, it is safe, if it turns out that a manufacturer copes with it pleasantly when something is.
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr] RS, KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
It becomes easy to carry out control at the time of breaking. Although it is easy to make line correction in a cornering, etc., it also feels like [ as opposite side effectiveness having become sweet ].
It becomes easy to carry out control at the time of breaking.
Although it is easy to make line correction in a cornering, etc., it also feels like [ as opposite side effectiveness having become sweet ].
View detail
It was used when making a zephyr 1100 into a separate handle. It was called this and has been used as it is, without also processing it. Since it can do without processing a frame and a handle stopper if this is used, it is recommended.
It was used when making a zephyr 1100 into a separate handle.
It was called this and has been used as it is, without also processing it.
Since it can do without processing a frame and a handle stopper if this is used, it is recommended.
View detail
Fits: HONDA CB400 Superfor, HONDA CB1300 Superfor, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100
The pure ratio 9-mm back exchanged since a palm and the waist were very painful after long distance's running so that it may become a posture which applies weight to a hand somehow when it was the pure handle position currently used for CB400SB, Altho
The pure ratio 9-mm back exchanged since a palm and the waist were very painful after long distance's running so that it may become a posture which applies weight to a hand somehow when it was the pure handle position currently used for CB400SB,
Although the travel of the appearance from which at least the half of the diameter of Bar approaches at hand by 7-mm up, and a handle is slight,
Do not take the time and effort like the handle exchange this slight quantity is very effective, and,
Free [ which there was trouble where a handle moved however it might bind tight with the product of the other company before being small since the near image had been held before purchase, but Colet does not have such a thing, either and it is fixing firmly ],
Probably it was unavoidable when whether it can hit and turn to neither Faulk nor a frame if large to the reverse which torque will not be applied but will suffer troubles if a mounting arrangement has only the small hezagonal wrench since it will fasten with a hexagon head from the bottom considered crime prevention, but it was delayed just for a moment.
View detail
Since rear suspension was changed to the ohlins, it was changed almost simultaneous. Since oil was only changed to the spring when the front fork could be removed, attachment was not so difficult and it carried out it. I think that the comment whi
Since rear suspension was changed to the ohlins, it was changed almost simultaneous.
Since oil was only changed to the spring when the front fork could be removed, attachment was not so difficult and it carried out it.
I think that the comment which run can realize stiffness and suppleness with a sufficient degree if it is a peak level.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is suitable for high speed operation. It stopped receiving a wind from normal. Moreover, although a black paint application portion interferes in the ETC antenna on a meter, gate passage can be carried out satisfactorily. I regard a highway
It is suitable for high speed operation.
It stopped receiving a wind from normal.
Moreover, although a black paint application portion interferes in the ETC antenna on a meter, gate passage can be carried out satisfactorily.
I regard a highway as their being the optimal goods for the touring used well.
If one problems are said, while the creak sound of attachment of a screen runs, it will come out a little.
At the time of attachment, if the crevice between it and a cowl is filled well, there may not be sound.
View detail
VFR800 (2006) was equipped. The hand was taken although deleting a little etc. needed to be adjusted at the time of attachment. the wind which uses, can actually adjust on touring (high speed), and hits the body -- with -- also depending -- it dec
VFR800 (2006) was equipped.
The hand was taken although deleting a little etc. needed to be adjusted at the time of attachment.
the wind which uses, can actually adjust on touring (high speed), and hits the body -- with -- also depending -- it decreases and is dramatically comfortable.
As a demerit, it was thought a few by the visor that being interfered with a field of view and a price were also high compared with other screens.
View detail