Reviews
Bolt for fixing CHOINORI's Rear Fender
[How is it used?
Bolt to fix SUZUKI/CHOINORI Rear Fender (Screw) It is
The + head got licked when removing the Rear Fender, and I had to use an extractor to remove it, so I purchased this 1 pc version.
How was your experience with it?
I can get into the new one easily without worrying about licking it.
The shine is different compared to the original Screw.
How did it compare to other products?
I think Home centeretc. sells Screws of the same standard.
OEM Parts are not expensive at all, so it is RECOMMENDATION to buy this one.
[Points to note]
Care should be taken not to lick it with Overtorque during installation.
View detail
Circlip for CHOINORI front sprocket
[How is it used?
It will be a circlip to fix the front sprocket of SUZUKI/CHOINORI.
Was the one you received as per Image?
It was just as Image.
Circlip replaced an existing item that was not known when it was replaced due to wear and tear.
How was your experience with it?
Since it is not performance-related, there is no particular change before or after the replacement.
However, it is effective in that it eliminates the risk of cracking.
[Points to note]
There are no areas that require special attention.
How did it compare to other products?
There is no Other Brand Productetc., so this one, OEM Product, is required.
View detail
YAMAHA OEM BLANK KEY FOR TW200
I ended buying yamaha OEM blank key for that design for TW・SRX250・V-MAX・SR400(1JR) RZ250/350・YZF-R1・FZX750 etc..There are so many many varieties.If anyone watch closely can able to see left side groove C TYPE. THIS IS AUTHENTIC KEY HAS SO MUCH VARIATIONS. SOME AUTHENTIC BLANK KEY HAS Left side groove E type, Left side groove A type, Right side groove B typE, Right side groove F type and Right side groove D type. they all match for the yamaha TW200 AND TW225 AND MANY MORE JAPANESE MOTORCYCLE..I'm really happy to have extra genuine key in my garage because I don't have any originals keys. couple of years back I made spare keys for my ignition and petrol tank key but they ain't original keys. they are clone. after I made this buy i can happily convert this blank key looks exact the same as oem original key for that I used and keep for very long. I can highly recommended this product .WEBIKE Shop is one of the best shop for buy finest quality and rare products for cheap prices.webike shop offers great service.so anyone can buy product with confident. webike packaging is awesome.they secure the items inside the box with the bubble (doesn't matter the product size,they do it anyway ) wrap for further protection.I highly recommended.WEBIKE.. awesome people and 5star shop. .Thank You !!! View detail
Genuine Kawasaki Ram Duct for ZX6R 2006
This bike came in with a few issues and during a front end strip down, it was found that the ram duct was broken in a few places which meant the air was not being directed where it should. Not too much of a problem although finding this part locally was a pain. I decided the best course of action was just to buy direct from manufacturer, ie, Webike. FInding the part was not hard as I had already got this via Kawasaki schematics. The price was really good value for such an intricate and comlex moulded part. Shippung was pretty good for such a large part too. Combined with some other items I already had in my basket, it worked out ok. EMS delivered my entire order in 5 days from shipping which you cannot moan about. The part was in it's own box and also carefully bubble wrapped by Webike warehouse. The part is well made and as I said, for such an intricate mould, it looks superb. Fitting was not too bad as the bike had already been stripped down to accept the new part. The finish was a nice smooth satin and all the joints and mount holes were also perfect and lined up great. One of teh many jobs now done and onto the next. Brilliant job Webike, thanks. View detail
Mount expansion foundation with no gaps
[How is it used?
I have been using it since I forget how many years ago. I must have used it 10,000s of miles on sunny days Touring Main with it installed.
Smartphones used:Xperia 5, Galaxy S21, Xperia 5 iii, Pixel 7 Pro
High-strength Screw Lock and RAM MOUNTS are used below to mount the phone instead of Mirror.
1.BallMount M10xP1.25 (https://www.webike.net/sd/24021956/)
2.Short arm (https://www.webike.net/sd/21313052/)
3.XGrip (https://www.webike.net/sd/22558592/)
Was the one you received as per Image?
Holder part with holes for Mirror as shown in the Image
Was the installation difficult?
BoltQuantity:Set of 2pcs.
Although there are many products of this type, the products we tested had a slight gap at the bottom of the contact surface between the Holder and the master side. In contrast, this product adheres closely on all surfaces.
Since the installation is done by replacing the original Holder, you don't have to think about anything as long as you are only aware of the upper interference.
How was your experience with it?
Very satisfied with the clean look of the product, as it is a very lean product with only a Mirror mounting hole on the top of the original part, which serves as the base for the Smartphone Mount.
Helmet locks that are shared with some Mirror holders will naturally become unusable.
[Included Parts:were they on?
As you can see in the attached picture, only a simple small box of YAMAHAOEM Parts is available.
[Was there anything that disappointed you?
It is not at all. No fading, no Cracketc. and still in service and mounts a relatively heavy weight phone (google pixel 7 pro).
View detail
Fits: HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD50 (Postal CUB), HONDA MD70 (Postal CUB), HONDA MD70 (Postal CUB), HONDA MD70 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB), HONDA MD90 (Postal CUB)
Right Part
When I bought my bike these caps were missing, so I found the part number and ordered them. I had to enlarge the hole a bit but it fits perfectly and looks great! View detail
คลิปล็อคอุปกรณ์พักเท้าหาซื้อยากตรงรุ่นที่สั่ง View detail
LightFixing Screw
I purchased the HeadlightFixing Screw because it was missing and not attached.
The same HondaOEMBolt was sold and the price was not that much.
View detail
Genuine Kawasaki Fuel Tap for GPZ 900R 1992
After getting this bike in for a service, I found that the fuel tap was not working as it should, probably due to age but it was not fully opening. The problem could only be solved by getting a new fuel tap. Finding the correct part for this particular bike was a bit tricky as it is a little old now. I did however manage to find it and searched Webike, very pleased to find they could actually get them in stock for my order. I had a few other parts in the same order which helped with shipping costs. Everything was very well packed and even some of the smaller parts. This tap came in the genuine Kawasaki box and was also wrapped in bubble wrap to keep it more secure during transit. Getting the old tap off was not a tricky job at all, just loosen the hoses and off it came. The new fuel tap is brilliant, the machining is perfect and I see it is a cast item, but that does not make this an inferior product at all. The tap mechanism is smooth and you can actually feel the orings bite when you twist the knob. Very pleased with how it is put together. Finished the replacement in quick time and now you can turn it fully on and fully off with no leakage. Very happy, thanks Webike. View detail
Brake leverSwitch
Front brake leverSwitch, a Honda OEM product, was not available and I was told that I could use this one instead.
This one is better because the switch section is covered for waterproof.
View detail
Fits: KAWASAKI KLX300SM, KAWASAKI KLX300SM
The best choice at Race time
[How is it used?
Model used:2005 D Tracker
Applications:Motard race, Touring
Period of use:About 8 years in Race and Circuit driving.
Was the one you received as per Image?
OEM Parts, making it ideal for a variety of applications.
Was the installation difficult?
Installation is very easy as all you have to do is loosen and install the Bolt.
Large sturdy with precision tools.
How was your experience with it?
Since they are OEM parts, there is no change in appearance or stiffness to improve shift entry, but we felt that they were definitely the best for use in Race.
ZETA and other companies offer ShiftChange lever as Aftermarket parts with good appearance and rigidity, but this product can be somehow bent by human power even if it falls over and bends, and because it is OEM, there is less mental Damage even if it is shaved.
In the race, the possibility of re-thailand is also reduced by being able to bend it by human power.
It is also sturdy enough to continue to use even after several falls and re-bending.
It was only after I stopped participating in Race that I too started to introduce Other Brand Products.
[Included Parts:were they on?
Bolt, Shift peg Rubber
[Was there anything that disappointed you?
appearance
[Notes]
If the number of times it has been bent and corrected due to a fall increases too much, no matter how sturdy it is, it will fatigue fracture or the Shift will not enter properly, so it is recommended that it be replaced if it is felt to be in trouble.
View detail