Reviews
I wonder how many years I've been using it.
Ah. You're in the picture (laughs) Torque wrench.
How many years have you been using it (laughs)?
I didn't make any corrections or anything like that.
I think the accuracy is hardly crazy.
I use it infrequently (laughs).
When I put together the four-wheel Engine.
And I use another KTC Torque wrench.
Well, it is better to tighten the major parts with Torque wrench. It is safer.
View detail
Precision
I bought the Torque wrench because the accuracy of a certain PROducts Torque wrench was obviously not right. However, with sk11's Torque wrench, the "snap" sound is not so clear, but it can be heard normally, so it can be used normally. It is very rare to find a Torque wrench that can be used in a normal way. I think it is a very large thing to be able to use it normally. View detail
Large strange
I have used it on 3 motorcycles and 1 car and it has not broken when used on motorcycles and my car has been through 2 mid-summer and it has not broken at all. The waterproof treatment is very clean and the product itself is solid, not cheap. Wiring is also very easy, so I highly recommend it. View detail
Necessities
This is a change from the pre-set Digital ratchet.
I usually use it for replacement work up to M12-size bolt.
The most important feature of the Large is the sound that warns you when you approach the specified Torque.
With the pre-set system, I don't know how much more I need to tighten because I don't know what the current tightening force is, but with the Digital ratchet, it shows the progress so I can adjust the amount of force. With Digital ratchet, the progress is displayed, so you can adjust the amount of force you apply.
The torque is also displayed when loosening the bolt, so if you are removing a bolt with an unknown torque, you can use Digital ratchet to loosen it and find out the tightening torque. Of course, this is not the case if the bolt is sticking, but I tried it on another bolt and found it to be surprisingly accurate.
I send it out for calibration every year, and it is hardly crazy, and I think its durability is good.
Also, in the case of the pre-set formula, the gap between the largest and smallest acceptable values becomes large due to its structure, but in the case of digital ratchet, there is almost no error even at the smallest and largest values.
It is also repairable, so it is still in use even though it has been dropped into a waste oil receptacle in the four years I have been using it.
View detail
A feeling of raising the level of motorcycle tinkering
When I first started tinkering with motorcycles, I didn't understand the importance of torque management, but after experiencing many failures, I learned the importance of large. I feel that I have grown up to be able to use my gold to keep my motorcycle in good condition, rather than spending it on customization. I've used other manufacturers' torque wrenches, but the KTC is the best for me because the memory is easy to read, the controls are nice, and it looks cool. View detail
staple goods
I was thinking of choosing Tonichi or KTC, but KTC's delivery was faster, so I chose this one.
Of course, there was no particular quality problem.
View detail
More peace of mind at this price!
In the winter, I was concerned about the battery voltage because I wear electrically heated Wear.
Since it is a Liter machine, I don't think I need to worry about it so much, but since it is invisible, I am a little worried.
It's not expensive, so I installed it as a DIY project.
I have a DUnit set up, so I just need to connect the acc wires from there to the battery. The installation itself can be done in 10 minutes. In order to hide the wires, I removed the cowl and put it under the tank, and struggled for about an hour.
The three wires from the power supply are thin and RoseRose (not bundled into one pc), so I used Vinyl Tape to tie them together. If I don't, I'm worried that they might break under the tank.
I used Surface Fastener to place it near the meter, and it's compact and fits well.
Now that I can visually check the voltage, I feel more secure.
View detail
I knew I had to at least do an air check myself.
Since I have nitrogen filling, I usually have my air check done when I go to the shop.
But if I don't have to go for a while, I'll just go for it. It was still almost gone. There were times when I felt sorry when people said, "I'm sorry.
I would forget when I got it filled, and I thought I should at least check it at home, so I bought it.
This air gauge is easy to measure even with a front double disk, because the instrument is easy to read and the hose is long.
The Hose is also made of Gold MeshMaterial, so it seems to be durable.
I haven't compared it with other instruments, so I don't know the reliability or error of the values, but it is a reliable manufacturer's product and I think it is large and durable.
From now on, I will check it myself from time to time and get it filled at the Shop when it is low.
View detail
JAPAN!!
When I say Tor Crunch, I mean Tonichi.
I think it's a safe and reliable Torque wrench!
In addition to motorcycle maintenance, they are also active in car maintenance.
View detail
The scale system is still cheaper.
The readability of the values is not as good as the Digital type.
When I was using Digital Caliper every day for work, it was convenient, but when I only used it occasionally for private use, the battery was gone before I knew it, and I had to worry about changing the battery because nothing showed up on the screen when I needed it.
In this respect, the Caliper scale does not require batteries and can be used occasionally without worry.
Compared to Mitutoyo's Caliper, the movement is not as smooth and there is some rattling, but it is not something you use every day and the price is cheap, so I think it is good enough for private use.
View detail
To manage the Torque
Not used for Meta, but can be used for Opposite Thread Screw View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screw
Minus point that the scale is difficult to read.
View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screws View detail
good
It is large and can be used for changing tires on cars. It is not suitable for engine work. View detail
Small and can be installed anywhere.
I have installed them on all my cars. It is easy to install, just connect the 3 wires to the designated points, the back light comes on, and it is small but easy to see. View detail
Torque wrench
I have the Torque wrench of kgf-m, but I didn't have the Torque wrench of N-m, so I bought it. View detail
This is where SmallTorque is required.
I used to use Tohnichi's Torque wrench at work, and now I work at Sunday mechanic servicing MTBs, which often require more delicate Torque management than Motorcycles. Worst case scenario, I might break a part by Overtorque, so I wanted to manage it well. I would like to purchase the Large size in the future. View detail
Easy to use
[How is it used?
I bought this for my graduation from Hand Wrench.
I had a torque wrench to tighten the wheel nut etc., but I didn't have one for SmallTorque, so I chose this product which has a moderate setting range and is inexpensive.
Was the one you received as per Image?
I didn't expect much since it was inexpensive, but the texture is better than I expected and it comes in a plastic Hard case.
How was your experience with it?
Loosen the screw at the bottom and set Torque to Quantity.:Set and retighten to set the Torque without tools.
I felt that the Click feeling when it became the Torque which I set was sufficient. In a certain site, there was also a person who said that the Click feeling was too small, so there may be individual differences.
I think it's easy to use because you don't need to change batteries with Mechanical, and you can use it quickly and easily at any time.
In addition, I was a little disappointed that there was no Release of Socket. It might be unavoidable considering the price.
[Points to note]
There is nothing special about it. I think this Torque wrench is easy to use even for beginners.
How did it compare to other products?
Compared to the Large Torque wrench for Wheeletc. that I have, it is naturally lighter and easier to use.
But, as I wrote above, only the place where there is no Release of Socket was disappointing. (Because the one for Wheel has Release)
【Review】
This Torque wrench is moderately large and easy to use.
If I wanted, I could set up to 30N-m and if there was a release mechanism of Socket, it would have been a perfect score.
View detail
Cospar good
The content of the instruction manual of the attachment was difficult to understand, but I was able to understand it by the explanation written in the box. I think that the cost is good. View detail
The trust is different.
I've used several different pre-set formulas in the past.
After all, in SmallTorque, Quantity:It's hard to understand the response of the set Torque, and there are some things with durability problems and Timings that need to be calibrated.
I purchased this product because I felt that Digital, a reliable manufacturer, was the right choice for me, considering the possibility of parts damage.
Recently, I've been using the Torque wrench more often than ever, because accurate Torque management helps prevent breakage and trouble.
The feeling of use is conveyed step by step by light and sound, so it is easy to understand
You can work without worrying about it, so you can proceed with ease.
I think the good thing about Digital is that the notification function and the reading is reliable, and I am glad I chose Digital.
It is disappointing at the beginning of use because there is no pre-set shock that says "Yes, this far", but the fact that it informs you step by step with light and Buzzer makes a difference in the sense of security and trust.
I think that there is a thing that hangs are necessary in the case of a delicate Button push feeling and the display of the reading is a delicate tightening, and there is ingenuity to get used to or MemoReset, but Quantity of Pre-set:If it is the same thing even if it is Set, I do not feel a sense of defect too much.
The Grip is easy to grip, the Plating is thick, the Notch feeling with a sense of moderation, etc., durability can be expected, and it is quite useful, if this is the case, I was convinced that the price that I thought was expensive was also reasonable.
He is now a reliable person who is helping me with various tasks.
View detail