Reviews
The color is different because it is a good opportunity!
Since the OEM was a subdued color, we purchased a different color, Blue.
Since the Screen Offset Bracket is made by DAYTONA, it is the same shape and color as the Screen Offset Bracket.
Well, as long as it's beautiful, it's fine. In a way, it's also called individuality. 。 That's fine!
View detail
White has 200 colors.
I was looking for an Aluminum Bolt to install parts for CRF250RALLY.
The reason for the gold color is that the outer tube near the installation site is gold color, so I wanted to make it look similar to the gold color. 。
I checked the items received. The number and Size are the same as described. The Pitch is 1.00, which was not stated, and the length of the Pitch is 45mm. The color is relatively dark Orange Gold, similar to Thailand Gold.
Previously, Color:I once imported an AluminumBolt set that was clearly marked GOLD. I was surprised to find several different colored Bolts mixed in with the Bolts I received. I am glad that this time JP MotoMart delivered all of them in the same color! 。
Various Gold color names are used in Southeast Asia. In Japan, all gold-based colors are often referred to as "gold" except in the case of color specialists. If you are looking for Anodized products in the same color family, please refer to the photos in this page for more information. 。
This product is fine as a Bolt. The process of making one-off parts is fun. It is also a fun process to purchase and select various Bolts.
View detail
Stainless bolt
Exhaust System fixing parts are rust-resistant Material:Changed to Stainless Steel.
This makes it rust-resistant and looks good.
View detail
The goal is to improve appearance
Bolt on Master CylinderClamp replaced with Titaniumium Bolt to improve appearance.
It may be slightly lighter, but you can't feel it.
Titanium's brilliance allows you to indulge in self-satisfaction.
View detail
Lightness is bought by Gold.
Best in cost performance? View detail
Alternative to OEM Product!
When I took my NC750X out of Garage to wash it, I noticed that the Bolt on the Rear CarrierStay was missing.
It was not a place where you can easily remove it, and there were two places. I thought it might have been stolen, but I had to find a replacement. I was worried that it might be stolen, but I bought a replacement because it was not available.
View detail
Acceptable as a cosmetic Bolt
When tightened with a Hexagonal Wrench, the Head cracked from the attachment point of the Screw.
I don't think it can be used in places where scattering hangs.
View detail
It is easy to install.
It can be installed by anyone, but it is not strong and will break if not Torque managed.
Be careful not to over-tighten.
View detail
Wound to Bolt
I have not used them yet, but when I opened the package, I found that only the 3-pack of Stainless bolts had wounds all over and the hexagonal holes were gouged and deformed.
I don't know if it was during manufacture or storage/transportation, but it is an expensive item and I would like the packaging to be one piece at a time.
The other Titanium and Aluminum Bolts had no Wound, etc., so the quality was good, but for now, I will use the Stainless in inconspicuous places.
View detail
It's good.
It is available at most motorcycle supply stores.
Parts replacement, etc.
I replace them when the dimensions change, etc.
View detail
To stop Rust.
XSR900 has bolt holes for carriers? I didn't want the bolt holes to rust, so I put them on.
Gold in casual places is nice.
View detail
Super trap Diffuser Disc
I have been using it for a long time to stop Super trap Diffuser and it is cheaper than OEM Product and no Rust and Large change is helpful. View detail
Cap bolt with high universality.
[How is it used?
When I got my 25 year old PAT225WE, I bought it as a replacement for an OEM bolt (some of them I didn't know where they came from) that had been licked and tired at the corners after maintenance and restoration.
Unlike the steel BlackCap bolt sold at the local home centerretc., the Material:Stainless steel makes it easy to use for fixing the exterior and switches, etc., as it is resistant to rust, and is useful in various places.
Was the one you received as per Image?
As I mentioned above, it is a relatively MAJOR design bolt that can be purchased at home centers nowadays, and it is just like the Image product.
Was the installation difficult?
This is a type of bolt that is detached and attached using a Hexagonal Wrench.
If you have the dedicated tools, it is not difficult to remove and install the bolt, as the removal method is the same as that of the Others bolt.
I think it is becoming the next most popular after the normal convex hex Head Bolt!
How was your experience with it?
Although it is a bolt that is relatively easy to pick at, the stainless steel material makes it harder to lick than a steel cap bolt, and the black color makes it less noticeable when fixing switches and plastic parts, making it a very easy product to use.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
2 Bolts on Package Quantity:The product is sold in each length as a Set.
[Was there anything that disappointed you?
Basically, no.
At one time there was a lot of fuss about corrosion and gnawing depending on the type and characteristics of the Gold genus, but I'm an amateur and don't know much about it.
Other items that would be helpful
Point and hang of installation
It is a convenient bolt that can be used alone or in combination with the FUJI crucible type aluminum spacer.
[Notes]
As with any Bolt, please insert the appropriate tool firmly and deeply into the bolt before attaching or detaching it.
Failure to follow the above will lead to unexpected trouble, such as licking the bolt.
[ITEMS TO BUY TOGETHER
This is a Bolt only product (pack of 2), so if you want to use it where a Nut, Spring washer or Spacer is required, please purchase the necessary items separately.
[Opinions and requests to Manufacturer
Thank you very much for the lineup of various lengths. If you could reduce the price a little more, it would make it easier to purchase large quantities.
View detail
Fits: Others
Highly universal design like a certain manufacturer's OEMBolt
[How is it used?
I purchased the DRC Aluminum Spacer for M6 to go along with the SEROW225WE as a Bolt to match when used to secure the exterior of the SEROW225WE.
The following items are "DRCAluminum spacer and Quantity:The "State used in Set" will be in Review.
Was the one you received as per Image?
As the title suggests, it is a bolt with a Flange that can be turned with an 8mm size Socket or Wrench, I believe that this Flange makes the Large size fit the recess of the Aluminum spacer perfectly, which leads to the sense of unity when the exterior is fixed.
The product was as per the Image.
Was the installation difficult?
The method of use is no different from that of a regular bolt.
How was your experience with it?
I tried to match several different Bolts in combination with Spacer's Spacer made by DRC. Design without being too assertive." Several lengths are relatively easy to come by." Cost per unit performance." I have been using this Bolt in my Spacer vehicle since then.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
Quantity of 2 Bolts in a Package made of Vinyl:The product is sold in each length as a Set.
[Was there anything that disappointed you?
It is Uniqlo plating, so Rust may occur in some environments, but considering the mature design and cost performance, it is a sufficient product and I have no complaints.
Other items that would be helpful
Point and hang of installation
The aluminum spacer is changed to match the coloring of the location where the bolt is used, and the bolt length is the same as that of the OEMBolt.
[Notes]
Since the head part is 8mm in size, if the proper tool is not used, the corner will be licked and it will not be able to be tightened at the specified torque, and rust will easily occur.
Any Bolt should be carefully tightened or loosened using the proper Size tool.
[ITEMS TO BUY TOGETHER
Naturally, it can also be used with Single Body.
However, I think it will look even better when combined with an aluminum collar, as I did this time.
[Opinions and requests to Manufacturer
Thank you for the lineup of various lengths.:I would appreciate it if you could sell Stainless Steel products.
View detail
Fits: HONDA CRF150R, HONDA CRF250L, HONDA CRF250M, SUZUKI RM85, SUZUKI RM85, HONDA CRF150R, HONDA CR85 R2 03-07, HONDA CR85 R 03-07
With big rotor
In parallel with the big rotor conversion, each part was replaced with a Titaniumium bolt.
The lightness and brilliance of the product are not only different, but also the level of satisfaction is different.
It is pricey, but I think it is worth replacing.
View detail
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF250X, HONDA CRF450X, HONDA CRM250R, HONDA CRM250AR, HONDA XR230, HONDA XR250, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI KLX125, KAWASAKI D Tracker 125, SUZUKI RM125
Titaniumization of the Brake area
Used for bolt fixing of front axle shaft.
Both lightness and brilliance are a world apart from OEM.
View detail
Cap bolt is also a Quantity:Set product.
[How is it used?
I purchased this product because I wanted to replace the bolt for fixing the exterior of the head, which had become licked as I repeatedly took it off and on.
Color and Cap bolt are Quantity:It is convenient to say it is convenient because it is a Set.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to attach a License Plate or to fix an accent to the exterior of the body, which is somewhat plain on the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
Normally, only the aluminum collar is sold for this type of product, but this product includes the cap bolt as well as the quantity.:It is a set, so the price is not cheap, but it is easy to use.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 11 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap bolt and color are Quantity:However, if you wish to use it for fixing numbers, etc., please purchase the required number of M6 size washers and nuts for the reverse side separately.
[Opinions and requests to Manufacturer
Please make the price a little lower so that I can easily purchase large quantities.
View detail
Black and hard.
Black and hard.
I know it's short.
It's not about length.
It's hardness, after all.
Black Dye Bolt is my favorite.
I think I'll buy the Black dye solution.
View detail
For installation of Rear Sets
Apparently, a button cap bolt is good for the Rear Sets attachment point to prevent them from getting caught on the shoes, so I used this one.
It's not easy to find these sizes at home centers, so it's nice to be able to choose the size and type in detail at Pinpoint.
View detail
Good variety of Sizes.
I went to Home center first because it was hard to find this kind of product on webike, but I couldn't find one with the same shape as the OEM one, and the ones I could use were too cumbersome because they required some modification. I went to Home center first, but they had a hard time finding the same shape as the OEM one, and even if they did, it would require some modification, so I gave up. The product is the same shape as the OEM and the size is JUST right! The only thing is that the price is a little bit high. View detail