Reviews
It is inexpensive but also very practical!
[How is it used?
I bought this to remove the fork top bolt on my CB1100.
Was the one you received as per Image?
I was surprised to see that it was LARGER than expected.
How was your experience with it?
It works fine as a Glasses Wrench, it looks expensive because of the DAYTONA stamp, but I am satisfied with it because it is cheaper than similar tools from Home center.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
None in particular. Good quality, practical and good looking.
▼It is definitely better than the cheaper Home center tools. I don't know about durability yet, but I want to use it for a long time.
View detail
It is a self-sufficient tool.
These tools are from KOWA, which was the distributor of Honda OEM accessory tools.
(Current OEM accessory tools are not JAPAN)
It is a 6P and 12P Glasses Wrench.
It says HONDA on it, so if you like Honda, you can buy it.
There are plenty of other tools that are cheaper and better.
There is no need to dare to buy this.
It is for Tool Mania.
View detail
Very Strong Offset Wrenches
I have used these wrenches several times in the past few weeks. They are lighter than I expected, but very strong and comfortable in the hand. I have been very pleased with these tools and will continue to buy more tools from KTC through Webike. DHL delivered this order to the east coast of the USA in about 36 hours! View detail
Cheaper than Fat Nan
It's almost meaningless to be cryptic. w
I bought this for my Drain bolt and I like the angle.
It is very easy to use and has great cost performance!
I regret that I should have had all my other Sizes here!
View detail
Ideal for CUB without Drain bolt
Ideal for CUB without Drain bolt
Reasonably short and angled at the neck so it's easy to work with.
View detail
A good tool that is sufficient and long-lasting
[How is it used?
I bought a DID Chain Cut & Crimp tool to replace the chain on my XJR400R, but I didn't have a 19mm or 27mm wrench, so I bought this one.
This product is a Both SidesGlasses Wrench, and I purchased it thinking that I could use the 22mm and 24mm that I did not use this time in the future.
Was the one you received as per Image?
Size:24×27mm, Size:19×22mmQuantity:I purchased 2pc and it was longer than I expected.
As a Sunday mechanic myself, I am satisfied with it because it is a one-of-a-kind product.
How was your experience with it?
I think it is very accurate and easy to use.
If I had to say something, I would say it is heavy, but that is about it.
How did it compare to other products?
There are others, such as the high-end tool Manufacturer, but I think this one is just right for Sunday mechanic in terms of price.
View detail
This is a good length to use for this.
ShortGlasses from KTC, the Japanese Standard for tools.
StandardLine, which is easier to apply Torque, is more convenient for ordinary use, but the short length of this product is useful in intricate areas.
I bought it to bleed air out of my RearBrake Caliper.
It was very difficult to open and tighten the Bleeder Bolt due to interference with the Wheel when it was long, but with this Short Type, it can be done without any obstruction.
Quality is KTC, for better or worse.
Accuracy and rigidity are neither noteworthy nor lacking, and the price is not particularly high but not cheap either.
It is the perfect positioning that you can pick up without thinking when you are tired of comparing and contrasting various brands, but you don't want to go for cheap ones either.
I can usually recommend it because you receive exactly what you expect, which is not above or below your expectations.
View detail
Used less often! But more reliable than a one-mouth Spanner!
Well, I bought it, but I don't get a lot of use out of it (sweat).
It is necessary to tighten the lock nut at the base of the mirror or the lock nut of the clutch wire by dodging the tubular object.
It really works!
The shape is similar to that of Glasses, so it can be tightened by hanging Torque.
Tightening Lock nut with Spanner scares me a little…
I have a hard time getting Glasses on the bottom bolt in front of the cover on the Horizontal TypeEngineLeft Side, such as MONKEY…FlareWrench was the same…
After all, it's better to stick a thin Socket in it...
Items that are limited in where they can be used, but where they can be used, they are very secure.
Not as fast as Spanner, but can you turn it around that fast?
People who have all the basic tools can give it a try (laughs).
And looks.
No BALI or angularity, Plating is Beauty!
MirrorTool is slippery, but this tool is not the right tool to begin with.
I haven't done any work involving Oil so far.
No problem at all
I use Glasses when there is a possibility of Oil sticking to them because Glasses are pear-shaped.
Mirror tools are slippery, but they are easy to wipe clean, so it will be like TradeOff in that area, so I guess I should choose based on how I like it to look.
For now, it is Recommendation for me.
View detail
Made by DAYTONA, it is reliable and highly accurate.
This product is a Glasses Wrench made by DAYTONA and is highly accurate. It feels comfortable in my hand when I hold it, so I found it easy to apply force. View detail
I knew it was KTC!
KTC is still the place to go for Motorcycle and car maintenance.
I have no complaints about the appearance, sturdiness, and ease of application of power.
Very easy to use
Quantity:I have several of them because I bought them at Set.
View detail
Easy to use
Very useful when removing the Brake pipe from the ABSModule!
It is a hard and tight area from the safety point of view, so if you lick it with Spanner, it will be Large strange.
I think it is an essential tool for maintenance around Brake.
View detail
Ratchet is easy to use
It is easy to use because it does not need to be replaced when working in a confined space.
The quality is very good and the Ratchet works efficiently.
It is sturdy and will not break even if a certain amount of Torque is applied.
View detail
Effective in tight spaces
This Wrench was useful for use in tight places where Stroke could not be taken.
Even with the Bolt in the back, Torque is easy to use because it can be hung securely.
Offsetting is good and accuracy is not bad.
View detail
Gun meta is cool.
I like the Gun meta because it is very cool. 10mm is the only thing I lost, so I use Tone's Glasses Wrench instead. Unlike many other products that only look good, this Glasses Wrench was able to loosen the sticking nut.:I use this for every maintenance of my motorcycle and I have never had a problem with the nut getting licked. I have never had a problem with it. I think it is the best Glasses Wrench in terms of cost performance. View detail
It's very useful sometimes.
Quantity in most sizes:Pair (for Left and Right) The difference between the two is 1mm, so it's harder to buy.
If you have it, sometimes situations arise where it is very easy to use.
In fact, it would be best if the combination of 12m and 14mm is used, but since 13mm is often used in foreign cars and mobile phone holders made overseas, I think this size combination is not so useless.
View detail
It's expensive, but it's something I'll use forever.
There are many manufacturers of glasses wrenches in the high-end price range.
In the end, I decided to go with the Point without the zagri and bought the Glasses Wrench from Nepros.
In terms of texture, I like the pearl texture, and because the edges are a little pointier, other manufacturers are easier on the hands when you apply pressure.
Since I often handle old cars and have a high probability of licking the screw, I wanted to reduce the probability of licking without the zagri as much as possible.
View detail
Great Japanese quality at a reasonable price.
I have been trying to find suppliers of Japanese tools that ship to the USA at decent prices and Webike serves me very well. KTC makes great made in Japan tools at reasonable cost and I could not find this same style from any other manufacture. The fitment to fasteners is great and I was very happy to purchase them. View detail
Fantastic 45-Degree offset wrench set.
This is a great wrench set that includes all the sizes you will run across on you Japanese motorcycle. As always Kowa fitment to the fastener is spot on and there is not slop at all. This set is small enough that it could probably be carried on the motorcycle itself since most new bikes don't include a a toolkit any longer. My 10-12mm combo has Honda engraved instead of Kowa but I can live with that. View detail
Effective in tight spaces.
It can be used to work in tight places where the angle of the Long does not work or where the Glasses Wrench does not fit. I was able to replace the Neutral switch in the back of the car with ease, and even with the Short you can still get the Torque you need. View detail
Ratchet is useful
The quality of the Ratchet is very good and the Ratchet works very efficiently in tight places and deep places where the angle does not work. It is very easy to use as you can apply a certain amount of torque when tightening without spinning when loosening. View detail