Reviews
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
As an old Motorcycle Spare
Since Fuel Hose and Fuel fliter were purchased, Band was also purchased,
Unifying Manufacturer gives a sense of security.
View detail
I have been using it for a long time because it has a good fit.
I have been using it for a long time because it has a good fit.
I usually use Black, but it seems to be out of stock, so I bought this one.
I am always worried about rust since it is not Stainless Steel.
Material of the same Size from before.:Waiting for Stainless Steel.
View detail
Used in RZ250 Fuel Hose replacement
I also bought Clip to go with KIJIMA's Hose that I purchased.
I matched it to the diameter, but did not use it this time for fear of Gasoline leakage because the Clip was not nearly as effective as the diameter of the Cook's Nipple when it was installed.
The same product is bundled with KIJIMA's Hose that I purchased, but the diameter of the clip is slightly different from this, or maybe the included clip works properly and is usable.
I bought it with peace of mind because of the claim that it could be used with phi;00 Hose, but this time it was a disappointment.
View detail
Replace with new one
When replacing the brake fluid, the hose clamp was also replaced along with the oil hose.
It was helpful that Single Item sold it at an affordable price.
View detail
I like that it doesn't rust.
I like that it doesn't rust even after years of use. View detail
It fits with Plating and gives it a luxurious look!
[How is it used?
NORMAL hose guide is rusting and Material:I purchased this one from Aluminum.
Was the one you received as per Image?
The size seemed smaller than the Image.
The texture is not bad and gives a sense of luxury.
Was the installation difficult?
I just need to replace the NORMAL Guide so I can tighten the Bolt and Nut. wdisc needs two of them, so I use one flipped over and inverted.
How was your experience with it?
I have driven several hundred kilometers without any problems.
However, I am concerned about the strength of the Arm section, as it is thin and has been stripped of its meat.
I think it will break eventually.
[Included Parts:were they on?
Body and Clamp Quantity:No other than Set.
[Was there anything that disappointed you?
The hose hole was too narrow to accommodate the mesh hose, so the mesh hose was quite limiting.
Material because there is very little Clearance:Rubber protective cover will not fit.
I use Emon's plastic hose cover for protection.
I don't think Normal hose would be the first place to enter.
I was torn between the ▼Titanium color and the Silver.
Considering the balance with the Titanium color bremboCaliper and the planned Titanium color NITRON suspension, Titanium might have been a good choice.
View detail
BlackBand!
I chose Black to match the Hose because it is visible.
It's not noticeable! Just a bit expensive...
View detail
Samco Hose Band
The commercial Hose Band did not feel right, so the Hose Band for Samco on Samco's Hose is good for a clean fitting. View detail
always
It is convenient to buy a variety of Sizes in bulk because there is no Drill if you buy these items every time you need them. View detail
Wrong size
The clamp that holds the hose on the rear brake reservoir tank was rusted out, so I bought this to replace it, but I actually needed a larger one.
I had no choice but to replace the fuel filter clamp attached to the fuel hose, which was also damaged. The product itself is the same as the hose clamp sold at the gardening supply corner in the home center for about 1pc. 80 yen, but since I got it cheaper than that, I decided to call it good. It's very easy to use, just pinch it with radio pliers and spread it out while attaching it to the hose.
I bought the hose clamp for the reserver tank at Home center and installed it to the right size.
View detail
Hose Fixing
It is purchase to exchange it to this Type which can be removed by the hand troublesome because the Fuel Hose fixed Clip which is attached now is attached to Type which is removed by the tool use.
The price is not high and Quantity:2pc. It is just the right feeling as Spare and spare because it contains Set pieces.
View detail
Good quality.
Most of the Case can't be used even if it differs by 1mm. w
Make sure to measure properly and use the appropriate size.
It restores the original diameter even if you spread it out all the way with a Rajpen.
It's obvious, but when you buy something cheaper, this is what you get.
No problem with this product.
View detail
Easy to use, but be careful not to lose it
I used it for Fuel line of TZr50R.
The deciding factor in the purchase
I was looking for a Clip that was easy to remove as I expected to remove the Fuel line a few times for adjustment and cleaning.
I decided to buy it because it was relatively inexpensive and had a good Impression rating.
In addition, since Clip of this Type was used in another part from the time of purchase, I thought it would be able to use it without a problem.
[Impressions of using it]
I thought the part of the handle was Large and certainly easy to pick up.
However, when I was pinching it with Tweezers to test it because the spring force was working in a certain way, it flew away 1pc. somewhere...
When you first put it on, for example, you can spread it out enough with your hands, which is better.
I think that the performance as Clip is reasonably good because there is no leakage especially.
Products compared
I compared this product with KITACO's and DRC's Clip. I bought this product because it was the top in the popularity order and it was inexpensive and had a good reputation.
【Review】
I thought it was good because it was easy to pick up and use. However, it is small and easy to lose.
It would be easier to find if the clip itself was colored....
View detail
It tightens securely.
The grip is wide enough to prevent leakage of the fuel line hose. View detail
Thin Hose fixation.
Purchased for fixing Hose.
If it's a weird material, it's a part that will rust quickly, but this one is still Large sturdy even after 2 years.
The meat removal on the Band is thin, but there is almost no bite to the Hose.
View detail
Ordinary Clip
I bought it for the Fuel Hose mounting area.
As long as the outside diameter of the hose is correct, you will not have any problems.
I'm surprised that it doesn't rust even after 3 years in blue heaven. Is it because of the surface treatment?
The claws of this type of Clip are small and hard to hook. It's a little bit sluggish, but that doesn't mean it's bad.
View detail
It looks smaller than the Size sign.
10.Plating and texture are good. View detail
Clip for peace of mind
important item
[Was there anything that disappointed you? None Measure the outside diameter and buy it
Do you have any wishes or improvements you would like to make for the Manufacturer? It would be even better if it is easy to grab with the pliers when fitting it
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? Made by the famous Manufacturer of Motorcycle Accessories
How was your experience with it? They hold it in place
Was the installation difficult? Easy
【Please tell me the installation point and hang】 The most frequently used 9mm
[Was the Instruction Manual easy to understand? nothing special
[Included Parts:were they on? None
[Others]
View detail
Fits: YAMAHA MT 25, YAMAHA MT03, YAMAHA YZF R25, YAMAHA YZF R3, YAMAHA YZF-R3, YAMAHA MT03
samco hose clip
samco hose clip, made in England.. that tells you all, the quality of the clips is the highest priority, compared to the high end stainless steel hose clips from Aliexpress these are still much much better. once you screw them up on the samco hoses you will just know how good they are. just, just that i didn't know that only 4 pcs are sent in the package, i guessed the purchase really meant for 4 units but i couldn't find the information anywhere, since there are 3 pcs of samco hoses, it means that I'll have to buy another 2 pcs, so unfortunate. View detail