Reviews
It's not bad.
The lever position adjustment is a mechanism where the screw comes out and hits the base, so it is not possible to adjust without a tool. I would like to have a dial type adjustment like the brake lever.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
Shape is almost OEM
OEM Clutch initial position is not quite right, so it was replaced.
I tried to use a Z company's one before this one, but it had the same model number as the S1000, but the shape of the cutout for the mounting position was different, so it stopped in a slightly retracted position. I wanted to make the initial position closer, so the position was better, but the Low RPMAssist was almost ineffective. I don't need it, but I don't like the fact that a certain function doesn't work, so I decided to use this one, which has a different model number from the S1000 and the GT. The adjustment method is Screw, which is a bit uncool, but it works just fine.
I changed the color, but the shape is almost the same as the OEM shape, so I wondered if there was something more I could have done. I thought it would have been nice to have something more.
View detail
Fits: HONDA VFR750, HONDA CB1000, HONDA VTR1000SP, HONDA CB1300SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000, HONDA VTR1000F FIRESTORM, HONDA VFR800, HONDA CB1300SB [SUPER BOL D'OR]
Clutch operation is easy!
My Left hand, which was always bad on the way home from touring, does not hurt at all!
The grip was a little jerky with the OEM, but after changing it, the grip felt nur-nur.
Recommendation:Silicon grease and OEM Boots should be purchased separately when installing.
MASTER Boots are likely to be shredded unless they are O/H, so …. (Mine was shredded…) 。
If you are wondering about brembo's MASTER, I think one way is to try this first and see how it goes.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-25
Made by Active
[How is it used?
I was looking for a decent lever because I was worried about the rattle of the Chinese lever that had been attached to my Yamaha MT-25 from the time it was delivered, and I was worried when operating the clutch.
OEM or KIJIMA products would have been fine, but I had a desire to customize it a bit, so I chose this product from the trusted ActiveBrand.
Was the one you received as per Image?
I purchased the Black color and it was exactly as pictured.
Was the installation difficult?
Since the clutch lever only needs to be replaced, it can be done in about 10 minutes with ordinary tools.
MT-25 (YZF-R25 also) requires OEM colors and washers, so confirmation is needed if changing from non-OEM.
If the OEM color is not available, it costs about 800 yen, which is high-end for just a color.
How was your experience with it?
As expected from Active, there is virtually no rattling.
I am satisfied with R's finish and the QUALITY of the product.
The play adjustment of the Clutch Wire is also infinitely adjustable, but the length of the Bolt is a bit short. (No problem in actual use in my case)
Also, the meat removal to reduce aerodynamic drag ish cool. I definitely don't feel like I can feel the impact at 250cc speeds, though! (Lol)
[Included Parts:were they on?
LeverBody only.
[Was there anything that disappointed you?
Nothing in particular!
【Review】
There is almost no rattle and the product looks good, so it is definitely better to use this one than to buy a strange Chinese Lever.
Brake levers are about twice as expensive due to their complex shape, so the Quantity:Pair (for Left and Right) If you want to have it all in one place, it will be a bit expensive.
View detail
Fits: Others Wire clutchCompetition model, SUZUKI RMX450, SUZUKI RM-Z, SUZUKI RM, KAWASAKI KLX450R, KAWASAKI KX-F, KAWASAKI KX, YAMAHA WR-F, YAMAHA YZ-F, YAMAHA YZ, HONDA CRF-X, HONDA CRF, HONDA CR
Definitely lighter.
I had been using OEM Clutch for a long time, but it was too heavy and tiring, so I replaced it with this one.
To install, remove all the originally attached clutch lever and holder, leaving only the wires in place, and then install.
The dust cover is screwed on, so it must be disassembled and assembled before installation.
Also, the Clamp portion is rotated so that it is less likely to break than a regular Lever or OEM.
The Nut that adjusts the distance of the Lever is also hexagonal, a spec. that can be firmly fixed in place.
I prefer to set it quite far away, but it feels quite light when I pull the lever, I don't know if it's because of the Ratio or some other secret, but I think you can feel it the moment you hold it.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Fits: HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TE125, KTM EXC, KTM EXC-F, KTM SX, KTM SX-F
Great replacement clutch lever
Best lever on the market,Buy one of these levers,Looks great and functions flawless. you will remember my words when you drop your bike and race because of a broken OEM lever.Durable levers, bike cartwheeled 4-5 times and the levers only had minor scuffs. View detail
I am satisfied with the look and functionality of the product.
I operate the Clutch with my index and middle fingers, but with the OEM Lever, I had to grip the Clutch enough to activate the Shifter, which was annoying, so I bought it in a hurry.
We had to wait quite a while for it to come in, but it was the right decision to install it.
I am an amateur, but I was able to replace and install it.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
It's crisp and clean.
This is a change from OEM.
The installation can be done without too much difficulty if you have experience in such work as replacing the clutch lever, since there is a translation (please enter hereManual).
Also, while installing it, I felt that the accuracy of the cutting process may vary a bit, and you may be dissatisfied with the Quick Adjuster for Red and Blue. The color will deteriorate under ultraviolet light while in use, and the color will fade, but if you are considering purchasing these as Custom, please be aware of this.
Grease is also applied to the bolt that fixes the lever from the beginning, and the handlebar is fixed with a clamp system, and the screw is very precise, so it was installed comfortably.
The clamp that fixes the handlebar is a little hard plastic material, so there is a possibility that the entire clamp may rotate when it falls over. If you are concerned about it, you may want to change to RubberMaterial.
As for the feel of the operation, as per the Title, it is snappy and sharp.
If you want a direct feel from it, I think you can further modify the Sleeve in the Thailandico fixation area.
Even with the Sleeve position in its normal state, the OEMLever comparison is better, so I felt that the Point is a point of preference depending on how a person uses Clutch.
I wish I had not been stingy and purchased it earlier, as it is one of the other Items that can be fine-tuned for Lever position.
View detail
Fits: HONDA CR, HONDA CRF, HONDA CRF-X, YAMAHA YZ, YAMAHA YZ-F, YAMAHA WR-F, KAWASAKI KX, KAWASAKI KX-F, KAWASAKI KLX450R, SUZUKI RM, SUZUKI RM-Z, SUZUKI RMX450, Others Wire clutchCompetition model
Click here for LeverCustom
Product Name
ZAP TECHNIX ZAP TECHNIX V2X Clutch Lever
Item Number
Z-7300XS
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose a clutch that was easy to adjust and this one was easy to find and in stock, so I went with this one.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is not particularly difficult, but since it is a clutch, be sure to install it properly.
How was your experience with it?
Adjustments are easy to make, and it seems to be adjustable in Race as well. Also, the design is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
It is easy to use
Brake Easy to grip and use as well as lever
It looks cool and perfect!
There was no XJR400R setup, so I replaced it with an FZ1N Bracket.
I changed the adjuster from M10 to M8 with Recoil.
A dress-up adjuster is attached.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Clutch lever replaced at the same time as the brake
Like the brake lever, the clutch lever was replaced with a ZETA PivotLever.
This is also my favorite Lever as I have used it on my KLX230R and have tipped it over many times, but the Lever has never broken, and it feels better to operate than the OEM.
After the lever is replaced, the clutch cannot be cut without adjusting the play of the wire, but this can be easily adjusted since it is a wire type.
I prefer 3Finger, but CRF250L has a light clutch lever, so even 3Finger lever can operate the clutch easily.
View detail
Fits: HONDA BENLY50110, HONDA BENLY50110, HONDA BENLY50, HONDA BENLY50, HONDA GYRO CANOPY, HONDA GYRO X, HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY)
It's a good product
It is being used well as a replacement for the genuine Benley 110.
It fits well without any discomfort and the operation is no different from the original.
This is a satisfactory product at an affordable price.
Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. -------------------------------------------------- -------- It is being used well as a replacement for the genuine Benley 110. It fits well without any discomfort and the operation is no different from the original. This is a satisfactory product at an affordable price. Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. Powered by Google Translator
View detail
Fits: HONDA CB1100, HONDA CBR1000RR, HONDA X4, HONDA VFR1200F, HONDA VFR800, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CB1000R, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1000 SF (Big One), HONDA CB1300SUPERTouring, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
easy to grasp
[How is it used?
I got a VTR1000SP2 from an acquaintance that had been neglected for a long time, and the lever was not OEM, but a cheap type of machined type that looked a little weird when you held it.
I don't like it, it's on Short and I don't like the way it feels against my finger. If I liked it that way, the OEM lever would be that way, and motoGP has that on theirs. So I thought about going back to OEM, but since I usually play off-road, I chose ZETA.
I chose it because it is not a so-called dress-up shape.
Our VTR1000SP2 is not in the list of compatible models, but I checked the compatibility of other Manufacturer's products and bought it thinking it would be the same. I think it would be good to add compatibility, but since they are unpopular, they won't be added.
Was the one you received as per Image?
The quality of ZETA's sharpening has improved over the years. In the past, the anodized surface would fly off and peel in seconds, but now it is Large and durable.
How was your experience with it?
It is easy to grip and the adjustment mechanism is fine-tuned.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are a gutsy person who wants to use Remote adjuster, you can buy Flight lever on a top ranking.
View detail
Simple and beautiful Forme!
I was looking for a simple and slimmer clutch lever, and I found this one.
I prefer a little more Short lever, but I like the feel.
It feels less thick and the excellent butchering makes it feel lighter.
View detail
Fits: SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400
Lowest
The product was guaranteed to fit but could not be installed. View detail
good-looking
The OEM lever was not bad looking and we were going to use it as it was, but when we pulled it inside the handlebar to install the USB power supply, the bent part of the lever hit the switch box and the clutch could not be cut off. The interference with the switch box was reduced a little and it looks more luxurious, but I think the operation is heavier than the OEM one. View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail