Reviews
If there is a pin on the pierced type, the shaft will not pass through. I didn't check the model of the car that fits.
Unfortunately, the Shaft does not go through when the Pin is present, so I purchased an additional V receiver. I did not check enough for compatible (non-compatible) car models. View detail
Reliable JAPAN
It looks cheap at first glance, but since the receptacle is sold separately, the cosmetics are very poor.
Since it is something that rubs underneath, the paint will peel off, but it will peel off quickly.
If you leave it outside for a week or so, it rusts right away.
If you are interested in purchasing, it is recommended to use it indoors on a rubber mat.
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
Wouldn't that be Outlet…
The painted surface was touched up, although it is not safe for use.
These items should be Outlet, not regular priced.
View detail
It's not easy to use with Swing Arm.
I bought it for the MONKEY125.
First of all, one hole in the Button bolt with a hole to stop the Tire was filled in.
I managed to install it with Pliers across the head.
I didn't have a Stand Hook, so I fixed it to the Swing Arm, but it was slippery and slippery.
In addition, it's not very strong or bouncy.
I don't know how much the Stand Hook & U-Shaped Bracket will improve it.
I don't think it's useless for heavy duty vehicles as even MONKEY is bendy.
It's priceless.
View detail
I trusted Brand with my purchase
The Caster arrives without it, so you only need to assemble it there
High Nut is welded to the body and simply bolted in place
But suddenly, two of the four wheels on the Nut side, Screw Mountain, had passed away
I tried to tighten it up, but to no avail
The Nut that was welded was bad to begin with, or maybe the color was applied to the Screw mountain part of the paint without worrying about it I don't know if it's because you're there, but ……
(I'm a former auto mechanic, and I'll bung the Bolt in at an angle and suddenly tighten it up as hard as I can with a tool We have not committed such a folly.)
Fix the Screw mountain with Tap, and separately prepare M8x40 1. 25's because the Bolt has been ruined. M8x40 1.25 was separately prepared and installed
The durability seems to be impressive from other reviews, so I'd like to believe that
If it fails in a few years, there will be no Repeat
By the way, once a CBR650R (Vehicle weight 207 kg) but once the receiver is properly applied, it lifts very lightly from there I did
That's the Long Type
View detail
I need hang and heartburn
Selected for reliable brands and beginners. Bike is GSX 1100 S Katana. The rear axle shaft is changed to a hollow type and it is also a shaft type for prevention of falling by stand detachment. For assembly, the mounting angle of the stand (surface) I do not understand in the manual. It is good to have a mark on the mounting surface. The impressions you use are more tangle when you lower the stand than when it stands up. It is easy to stand the bicycle stand up, but when you lower it you need a knack and you have a sense of uneasiness. In order to hold the motorcycle with one hand and remove the stand as in the manual, the full length like Katana is long and it is impossible for a heavy bike (anxiety) there is. I put the stand down in advance beforehand, hold down the motorcycle with both hands and finally remove the stand with the foot. There is a sense of security that holds with both hands. Dissatisfied with quality, plated part easily rusted. Storage is a shuttle garage. The shaft stick is thin and unreliable. Take a long position to deflect. Also, the contact portion of the bottom of the stand is wound with a spiral to prevent scratches. Although I wrote various things, I am satisfied like a racer machine when looking at the stand on the bike stand. View detail
Cheap but not usable
It is too large for Mini bike
We used it for NSF 100 but it can not be used.
Front stand can not be used for Full cowl at all.
So welded and shortened.
View detail
Is it just for keeping it a little?
I am thankful just to have made MaintenanceSTAND for DREAM 50
As pointed out by the former person, the receiving Rubber sheet and Plating's half Pipe can be removed immediately
Still useful for maintenance around the back
Is it for the people who decorate the making?
By the way, the thing made by Honda access is the same thing that the width is a little narrow and turning the rear wheel and Sprocket's Bolt hit and it is difficult to turn around
View detail
It purchased because collecting-pipe wearing can also respond. Although it is used for z1, the wheel is offset by the left, and since the place which can carry out a jack-up is pinpoint, z1 is touch that it can be well used just before. If it is r
It purchased because collecting-pipe wearing can also respond.
Although it is used for z1, the wheel is offset by the left, and since the place which can carry out a jack-up is pinpoint, z1 is touch that it can be well used just before.
If it is removed, it will hit a collecting pipe, or it becomes a location which is equivalent to the sprocket nut of a wheel and a wheel cannot rotate.
Or [ being just going to say that it is unavoidable as it can use well ] ..
View detail