Reviews
Bright and practical
Compared to NORMAL, it is very bright and easy to see.
We purchased the dark red color, and although the darker color of the lenses might make it difficult to see from behind, this was not the case and the visibility is sufficient.
I am very happy with the color and the tightening effect on the body of the car.
And the Instruction Manual that came with it was quite clear and helpful, which I liked.
It is easy to install and Couplet-on.
This is a product from Recommendation
View detail
Stanley LED Bulb Standard
Used for ADDRESS V100
I used it for a tail lamp, but since the valve of the tail lamp of the ADDRESS V100 also serves as a license plate light, I chose a bulb color for the light emission.
Easy to replace as you just replace the Normal valve.
View detail
Was great to a 12v headlight
I needed to upgrade my headlight so needed this plug for the loom, it fitted really well to the original harness and was easy to fit to the headlight. View detail
KITACO:High flasher measures for Unbreakable lens
I am posting a Review after about 2 years of implementation.
I introduced this as a countermeasure against high flasher when I change the blinker of KLX125 to unbreakable lens.
It is easy to install and works perfectly.
Note that the harness is a bit longer than the OEM Relay, so the waterproof cover on the body side will not fit properly.
However, if each waterproof cover is wrapped with Self Fuser Tape, it is large and durable.
It has been driven about 5,000 km in 2 years, has been caught in large rainstorms while touring, has been igotting in a vomit muddy Enduro race on a rainy day, etc., etc. Water resistance test of a reasonable strength. (?) I have been through the following and to this day have had no problems.
High flasher is illegal and must be addressed.
This product is an easy one-shot solution, and we recommend it!
View detail
Light bulbs are also tasteful, though.
We were impressed with the performance of the SUPER CUB 90, which was converted to a battery reply.
Used for 750 MACH Tail in good shape, Brake lever, Pedal running to check.
Compared to before the replacement, it changed from dim to VIGOR.
Strongly RECOMMENDATION for those who drive old or bulb Spec. vehicles.
It will free us from the worry of sudden bulb failure, and will also increase visibility to following vehicles and improve safety.
It will also reduce the burden on Battery.
View detail
Increased light intensity and reduced power consumption due to LEDs Increased visibility
YAMAHA Used for head lamp on FZX750.
The increase in light intensity due to LEDs is incomparably brighter than Halogen bulbs.
Since the vehicle's electrical system is weak, the reduction in power consumption due to the use of LEDs will be helpful.
It would also improve visibility to others, which would increase safety.
*This is a Repeat purchase due to its effectiveness when installed on a TRX850.
View detail
LED Bulb with just the right standard color that is not an explosive light.
YAMAHA Used for FZX750 Tail lamp.
I think it is best to use LED bulbs for tail lamps because they emit light instantly instead of the gradual lighting of Halogen bulbs.
The effect of reduced power consumption due to the use of LEDs was also helpful.
The luminescence is a standard color, not the so-called explosive light that LED bulbs tend to emit.
*This is a Repeat purchase for use with TRX850.
View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA SUPER CUB DELUXE, HONDA PRESS CUB 50 Standard, HONDA PRESS CUB 50 DELUXE
Halogen bulb for Glass Lens
Headlight lens of 25 years old MONKEY is glass, white light of LED is not suitable for it.
It may seem unreliable brightness compared to the current Motorcycle, but it is also Don't be in such a hurry on the road at night." I feel as if I am being told to do so.
There is nothing much to say about the performance of these standard Halogen bulbs, but I am relieved that they are cheap and easy to obtain, as if you can just replace them as soon as they run out.
In this day and age, some manufacturers have stopped producing Halogen bulbs, but I hope that Stanley will continue to produce bulbs of reliable quality and low price, including OEM supply.
I'll buy another pc. for spare!
View detail
Fits: その他
RelayBody is slightly larger
Purchased to install Hazard switch on DL1000 V-STROM250SX
The wiring is long enough, so when installing the wiring, it was trimmed down to about 500mm and wired at the Bullet Type Terminal.
Wiring for Position is fixed with Bullet Type Terminal near BlinkerWiring.
I'll install the PositionLED Blinker one of these days when it comes out.
However, for the DL1000 V-STROM250SX, there is a Hazard kit (46234) from DAYTONA, and if you are worried about the wiring process, it would be better to choose that one.
I didn't like the supplied On/Off Switch Flat Face Type (40440 ), so I used a separate Slender Switch. [Flat Seesaw Type] (79339), but the price is about 1,,500 yen higher.
View detail
![[Mr Quick] Taillight Garnish](https://img.webike-cdn.net/catalogue/images/132620/mr19-mo02-01_TS.jpg)
Easy to customize
Double-sided tape is all that is needed, so anyone can easily attach it.
The price is cheap, so I bought it thinking it would be okay if it failed, but it feels and looks great!
View detail
The classic European Blinker
This is a replacement for an OEM Blinker. I am satisfied with the stylish look. View detail
I'm just pimping...
[How is it used? Town ride
Was the one you received as per Image? It was a little different.
Was the installation difficult? Simply replace the Connector and you're done!
How was your experience with it? The light went from a light bulb color to a white light color like a White color fluorescent lamp, and the light was confirmed to be lit well even in daylight.
[Included Parts:were they on? Two Tie Wraps in Black for outdoor use
[Was there anything that disappointed you? Quantity of claws to fit into the insertion slots.:Pair (for Left and Right) Wiring is oriented in the same direction, so depending on the direction, the wiring is short and may interfere with the cowl, so care must be taken when routing the wiring.
Replacement of ▼Lamp requires removal of the exterior of the car body, No.2 long and short +Driver, M10φ? SocketLunch.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
The quality of the product seems good.
We chose this product for the purpose of dress-up because the OEM headlight is a little dark.
Considering the power consumption, we used LEDs from Sphere Light instead of Halogen bulbs from Included Parts to improve the appearance and brightness.
As for installation, I think it would be easy if you read the Instruction Manual carefully.
However, the optical axis adjustment is Quantity:Pair (for Left and Right) The LED bulbs can be adjusted in terms of brightness, so it is now possible to upgrade the level from the OEM product.
I think it is possible for those who are considering purchasing this product since it was not chosen for the old corporate style but for the purpose of increasing brightness.
Please note that this is a personal opinion and should be used only as a reference.
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
Great quality but
Products to buy together You can just use some electrical tape wrapping the rod, but little lose on Doremi LED blinkers. View detail
If you are looking for LED Blinker, this is the one.
It comes with a conversion connector so I can just replace the OEM blinker relay and not have a high flasher. View detail
It is moderately small and good!
It is moderately small and suitable for mounting on NumberSIDE. View detail
![[Highsider] Turn Signal Proton TWO](https://img.webike-cdn.net/catalogue/images/129660/17308_TS.jpg)
Small and wonderful.
Blinker is better for Small. View detail
I was looking for something like this.
It was needed for Blinker installation. View detail