Reviews
Great Upgrade
These fitted really easy and had no problems fitting them to the engine. i was really happy wth how they fitted and they made the bike look really good. The red really made the bike look great! View detail
Many SR riders use it! (p∀p) aha!
[How is it used?
I wanted to put something Iconic on my car, so I decided to use it.
Was the one you received as per Image?
I believe I received the exact image of the product.
The inside of the lid has a tight Rubber so I thought the waterproof property was also good.
Was the installation difficult?
I think it depends on the installation location, but it was not difficult because I just crimped it into the available hole.
More than that - I was worried about the Logo to put inside, mainly because of the angle!
How was your experience with it?
Once attached, it does not bother me. The place where it is attached is not visible when riding, and it is completely self-satisfying.
[Included Parts:were they on?
No, it would be better not to add "Included Parts:" to increase the price.
[Was there anything that disappointed you?
None 。
It is a good Manufacturer that also offers Logo that fits the size.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Before purchasing or installing the product, it is recommended to test the product on a piece of paper, etc., against the part of the car body where you plan to install it to see how it will look, so that you will not make any mistakes.
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Only looks
This price is not cosmetic just because it looks different….
Since we changed the OilfiFiller cap, we decided to do the other side as well.
View detail
NORMAL Screw is lame, right?
I wanted to replace the NORMAL Screw because it smelled like a potato, but I didn't like the gear-like Knob from another Manufacturer.
I decided on this one, because it is a Round Type, which has the drawback of being slippery when turning it, but it was Large and durable when I was wearing Gloves, which prevent my fingertips from slipping. If it is not wet, you can turn it with bare hands. If you are looking for practicality, the gear-shaped Knob is definitely easier to turn, but I decided to go with this one because of its looks.
I love it
View detail
RearTank Guard for cbr1000rr but can also be used for cbr600rr!
This is my first purchase of a~tech products and I think the quality is good.
I had removed the tandem footpeg and installed a single seat cowl, but the rear brakes tank was exposed and I felt something was not right!
When I put it on, I was satisfied without complaint!
If anyone is having the same problem as I am with the exposure of the Rear brakes tank with the Tandem Footpeg removed, this is a RECOMMENDATION.
By the way, the model of cbr600rr is 2bl-pc40.
View detail
The service hole cap offers an attractive yet practical design
About quality and texture - The service hole cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The service hole cap offers an attractive yet practical design and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the finned camshaft cover from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the service hole cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to service hole cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the service hole cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The engine cap offers an attractive appearance
About quality and texture - The engine cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The engine cap offers an attractive appearance and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the clutch cover plate from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the engine cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to engine cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the engine cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Dress-up casually!
Since it is a BreedCap, it is not very conspicuous, but it is like a casual dress-up. View detail
Attached because it's cool.
I didn't put QuickSystem on it, nor do I Race it, but I put it on because it's cool and it's also a functional Part.
Neck the Drill and Nutter required for the work is expensive even though they are not usually used, but we found a tool that can be implemented cheaply.
Hand drill about 2,800 yen, A little nutter about 1,000 yen, 7.1mmDrill about 900 yen.
I was reluctant to drill a hole in the Swing Arm, but I took the plunge and did it, and since it is an aluminum Swing Arm, the hole opened easily.
The nut is also fixed with 2-component Epoxy when crimping because it would be disastrous if the nut spins out of place.
When crimping, care should be taken not to raise the screw threads since the aluminum nut is M5 and small in diameter.
The part where the chain hangs is chamfered and has a good texture, but the price is Neck.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA CHALY, HONDA DAX, HONDA CD90, HONDA CD50, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GORILLA, HONDA MONKEY, Others , HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA LITTLE CUB
Easy Dress-up
I bought it to replace the rear shock absorber.
One point can be fashionable.
When using this product, the washer that comes with the Rear shock absorber may or may not be used, so it is necessary to read the Instruction Manual.
Rear shock absorber in the photo is SP Mukawa Rear shock absorber Black 06-04-0152
This one product contains 4 Nut.
View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Well, it's only for appearance, but it's important to look good.
It's the look. Looks.
Motorcycle is a hobby, so it is a matter of how much you are satisfied with it. This item solves this problem, and it does not improve the performance at all.
If the OEM engine plug is too hard to remove, apply a Large thicker and harder Washer and turn it between the pliers.
As everyone says, it's expensive, so at least put an O-ring on it.
View detail
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Emblem
It was an easy job, as there was no modification to be done, just remove and attach the Screws! View detail
Not much change.
Maybe it's not necessary at this price? View detail
Kawasaki Zephyr 400/550 dress up badge. A MUST HAVE
fantastic dress up part for the kawasaki zephyr 400/550cc. my bike now looks complete with this badge and the build quality is amazing. if i could give it 6 stars i would. View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Chain case hole replacement
Too easy to install, conversely, theft is a concern. View detail
A must if you want to make Racer
Essential for quick detachment of Cowl View detail
Fits: HONDA CRF110F, HONDA CROSS CUB50, HONDA CROSS CUB110, HONDA MONKEY125, HONDA CT125, HONDA TRAIL125, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It looks beautiful, but!
The original shape is a little smaller than the original, but the Mizo is a little larger! View detail