Reviews
Good idea?
Second purchase
I had to wait about a month because of a shortage, but it was worth the wait.
All Stainless, welds are solid.
I bought one from another manufacturer, but was disappointed to find that the lid was made of steel even though it claimed to be made of Stainless Steel.
The price is higher than others, but the peace of mind is different.
View detail
Looks are everything?
It's all about looks, right? It doesn't work, it doesn't do anything. I bought it in Black because they were out of Silver and painted it. Silver was out of stock, so I bought a Black one and painted it? I am not satisfied with it, right? View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
Cap.
This is a Cap that fills the Service hole.
There is nothing particularly difficult about it, just push it in by hand.
1Quantity in total for Left6Right6:2pc. Just fill in the Set.
The effectiveness of the stain prevention is still unknown since it has only just been installed.
One part of the Radiator is mounted on the back side of the Radiator, so it can be installed where the Large body size fits without looking at the instruction manual, although it is not shown in the photo.
View detail
Classical is the way to go!
The material and design are very classical. It's easy to install, and it's a VERSIONUP to a fashionable cafe racer right away. View detail
Fits: YAMAHA TT-R50E, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA YZ250F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F
Dress-up effect is too high.
Just by installing these parts, the impression will be completely changed.
I think it depends on Motorcycle, but I removed it with Minus.
I used to use it on my CRF250L MD44 from MainMotorcycle, but the HondaDREAM store I went to prohibited me from bringing in parts, so I just had them remove it. At that time, they showed me how they were working on it, and they were doing it by biting a cloth or something on Minus. I removed the minus only, without biting the cloth, based on my memory of that time.
For some reason, the Large size came off easily, but the Small size is abnormally hard and difficult to remove, so it is better to apply force carefully so as not to lick it.
Recommendation to do it in Minus rather than in Coin.
I think OEM O-rings should also be replaced without using them all the time.
View detail
It was used for the dress-up of a tank and a fender up.
It was used for the dress-up of a tank and a fender up. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
good-looking
I have lost my Screw after one run. View detail
Unexpectedly effective
Windscreen alone is not enough to provide wind protection from the waist to the knees, so it was installed.
The effect is outstanding. Not windless, but moderately breezy, so it is not hot even in summer.
Even if it rains suddenly, if you are running, you will not get wet unexpectedly.
View detail
OK.
This one was also of good quality. Can you please give me a reseat? View detail
self-satisfaction
When attached to a license plate, it becomes a one-point custom.
The price is high because it is Titanium, but it can create a different atmosphere.
The baking color is bright and the Titaniumium Bolt has a nice luxurious feel.
View detail
Vivid colors
It can be mounted in various locations and is Exactly for Motorcycle Accent.
It can also serve as a Washer since it is simply removed from the Bolt and placed between the Bolt and the Washer as usual.
You can choose from a variety of colors and easily create a custom look with these items.
View detail
of high quality
When used for License plate bolt, it becomes One point.
These are inexpensive and easy parts that give a custom look.
View detail
One point
When attached to the license plate, it becomes a one point.
It is a Dice design, so it is unique and eye-catching.
The look from the Rear of the Motorcycle is a bit different.
The price is reasonable, so it is easy to buy and the quality is not bad.
View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI W650, KAWASAKI W400, KAWASAKI ESTRELLA
Used for MeguroK3
Classic fenderFront from the same manufacturer (WW-FF1GEL) It was used in conjunction with
Holes were drilled using a method that came up in a Net search, using masking tape.
The gap between the thickness of the Plate and the Bracket is not Exactly, so the Plate moves around when assembled properly.
If you are concerned about this, you should twist the Bracket to assemble it, or adjust it by collapsing the gap between the Bracket.
Plate will peel off color quickly during assembly.
View detail
Small personality, durability is …
I found it to be a very good product for One Point Fashion for my feet.
The work itself only requires replacing the Breeder's Cap, so even beginners can do it quickly and easily.
The texture of Anodized was good and I thought it was indeed a Kohken product.
But it's not very durable;
After six months, the Rubber cracked, and after about seven months, only the Aluminum Cap was missing.
It may be inevitable for the structure to fly away, but the caliper generates heat, and I would like to see the use of heat-resistant and durable rubber.
We wanted to take a look at the NORMAL Rubber cap, so we gave it a slightly lower score.
View detail
Exactly to Number's Accent
The 250 does not have a vehicle inspection, so it is necessary to affix a CALI Seal, but it is a bit nonsensical to just slap it on as it is.
The Plate, Frame, Cap bolt & Bolt Holder, which were always used on past vehicles, can be installed at the same time to enhance the quality of the number area.
The drawback is that it is anodized, so the color fading caused by ultraviolet rays is severe.
View detail
Used with Exhaust SystemMounting Bolt
Used as Bolt for Exhaust System installation.
The design is good and the Manufacturer logo is satisfactory as Accent.
I thought it was kind of nice to be able to choose the length and diameter of the bolt.
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Installed on a WR250R
Installed for dress-up!
Right has a Filter cover, etc., so Quantity:Pair (for Left and Right) It is good to get the Balance in the
View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
zeta engine plug
It's a cheap but nice dress-up part. The material is very strong and of high quality. Installation takes only 2 minutes. View detail
pleasant to look at
This time, I put this Holder in place of a Washer for the M10 Cap Bolt for the Exhaust System.
It is definitely better looking than the tasteless Washer. It also applies a good amount of surface pressure. I chose Silver, but there are many colors to choose from.
View detail