Reviews
POSH Aluminum Pillion Belt Cover
About quality and texture Well made aluminum from POSH. The cover gives a beautiful outlook compared to the stock sliver look. About the feeling of use It's a cover that fit perfectly without any lapse in space. Difficulty of installation Less than 15 mins to remove the original screw and place the cover on with the given screws. I hand tighten the the screws as hard as possible. Cost performance and comparison with other products There's no comparison with others as there isn't any similar product around. The price is not expensive but it gives an additional look in your plain looking seat. About shipping and packaging Shipping is not expensive as the the items are small. Items are place in a vinyl plastic bag but no visible damage after shipping. Any concerns, cautions, or advice when purchasing The given screws length is long enough as there's worries about the safety of the belt if the pillon is to grab it. Make sure it's well tightened and theses should not be a problem. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
This is the overall satisfaction level for ass pain measures
Since I bought a z900rs, I have been worried about the ass pain that everyone else is suffering from,
I have been studying all over the Net and watching YouTube.
There were many candidates, but we chose DOREMI for quality, cost performance, and delivery time.
The product was out of stock due to its popularity, but thanks to the power of Large Hand Wafer Big, we were notified that the product would be in stock soon and it was delivered.
The Tandem seatBelt requires a hole to be made by myself, and although I was nervous, I was able to make the hole without difficulty,
Belt could also be attached, although it is a little stiff.
I usually get an ass ache as soon as I go touring,
I felt that it was considerably eased.
Footing is a little worse, but not a problem at all in exchange for butt pain.
I would highly recommend it to anyone who is unsure about Seat from another company.
The quality is as good as OEM is also recommendation.
View detail
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
Design is good, but... It didn't help me prevent buttock pain.
I was looking for a Seat with the primary purpose of preventing OEMSeat buttock pain.
It is a personal feeling, but the conclusion is that it has no effect on preventing buttock pain.
On the contrary, my butt hurt faster than OEM.
The OEM could sit for an hour to an hour and a half, or about 100 km in distance, without discomfort, but with this Seat, by the time an hour passed, I felt discomfort in my buttocks, which soon turned into pain.
Please note that the sensation varies from person to person and is for reference only.
I think the design looks good and the quality of the product is good.
The impression is hard, as you cannot tell by touch if there is any Gel in it.
No change in footing was felt for the 20mm ankle extractor.
What I was looking for was a soft and absorbent Seat, so it is the exact opposite.
I will consider other Seat after using it a little more.
Point that I decided to purchase this time
Price, with Gel, Tuck roll, 20mm Anko (bean paste)
My greatest expectation was for a Gel, but I was disappointed.
(What kind of Gel is in it?)
The effect of footing improvement by 20mm Anko removal is unknown.
Tuck roll design is GOOD.
It would have been a great cosmetic product at this price if it eliminated the buttock pain, but alas.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail
SEROW225 WE would like to see it listed in the Custom parts section.
[How is it used?
I had been using a 1997 SEROW225 WE by replacing the deteriorated seat cover with a certain manufacturer's fabric, but while playing in the mountains, I fell on a rocky terrain and damaged it...
Later, sadly, Webike's SEROW225. I was looking at the custom parts section of the "For re-covering Seat fabrics" and found NTB's famous Seat fabrics!
I was wondering why I haven't seen it listed in Webike's SEROW225 WECustom parts section, even though I've seen it on other sites. SEROW225. You were listed only in the column etc.
The product image shows that from 4J5~. (so called 225WE) Design shape of the SEROW225, so it is more than listed in the SEROW225 section. SEROW225 WE We would like to see it listed for use.
rather MotorcyclePartsCenter. I would so much like to reverse the listing of the Seat for SEROW in the "Seat for SEROW" as it is a pre-225WE Type.
How did you like it?
As mentioned above, the MotorcyclePartsCenter Seat fabric used before this product was sewn for Seats before 225WE, so there was some force required to attach it to the Seat for WE, but this product was sewn Exactly for WESeat, so the attachment process went smoothly. However, this product was Exactly sewn on WESeat, so the work proceeded Smoothly.
The fabric is thick enough, and the SIDE part "YAMAHA" If the Logo is included, you will not notice that it has been reupholstered, except for the Owner, because the finish is so natural. (I think SEROWMania will understand because the sewing parts and texturing of the fabric are different...) 。
I personally think this is the best alternative Seat fabric for SEROW225 WE because of its low price.
How did it compare to other products?
The SEROW225Series Dedicated I don't have many options for Seat fabrics. (excluding OrderSeat) I think this product is the best fabric as a ready-made product.
As of 2024, Seat Covers are still available on YamahaOEM... on YamahaHP. Part No. 4JG-2477A-00Seat Cover Assembly (skin only), price 17,380 yen I will
NTB's Seat Cover costs 2,850 yen, and although there is no YAMAHA Logo on the Seat side, the product is more than adequate considering the price difference.
[Points to note]
Since the Draping is designed to fit the shape of the SEROW225 WE OEMSeat, the reupholstering process itself is relatively easy and Beauty.
In addition, there is an NTB Channel on YouTube, where you can learn how to set up a seat, hang, etc. in an easy-to-understand manner. (What is put up in the video is not for SEROW) If you are not confident, you should take a look at one.
Other items that would be helpful
The deciding factor in the purchase
Made by NTB for safety and stability, this was seriously the deciding factor in my purchase.
It's not fancy or fancy, but it has OEM-like quality, and at a reasonable price, it's easy to buy.
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:Did it come with 1pc. and Tandem belt?
The 1997 SEROW225 WE does not have the with Tandem Belt from the beginning, so there is no problem without it.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it.
In my case, I do not apply Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
As I drive an older vehicle, NTB's Seat fabric is an indispensable product for me, so please keep the lineup going as long as possible!
View detail
Protection of OEMSeat + increased seating comfort
[How is it used?
Seat cover for SUZUKI/CHOINORI OEMSeat.
I was considering whether to buy a new seat or reupholster the tattered CHOINORI seat I had purchased when I found this on webike.
I bought it immediately because the Gold amount was low and I only had to cover the top.
Was the one you received as per Image?
The texture was better than I expected and the size was perfect for an OEM Product.
I chose black to match the OEM, but brown is also available, so you can easily change the seat color.
How was your experience with it?
Besides the seat protection and dress-up effect, I feel that the seating comfort has improved a little.
Originally, CHOINORI's Seat is soft, but by covering it with this, it feels as if another cushion is being laid on top.
[Points to note]
Nothing in particular, but it is only a Cover, so maybe one day it will tear and need to be replaced? It is just a Cover, so maybe it will tear and need to be replaced someday?
How did it compare to other products?
I can't think of any other product because of this kind of product in OEM Product.
View detail
Newly confirmed as compatible with KF54 (ADV160)!
To JK05.KF47 It works somehow." It was a confirmation of the fit of the However, it was a just fit for ADV160 (KF54). View detail
neither good nor bad
Model YZF-R25
The three-layer construction is quite thick, and the Magic tape can be extended for universal use.
The size is a little large, but I think it is acceptable.
View detail
StylingUp and Improved usability
Styling couldn't be better.
However, the difference is Large because the OEMSeat is too comfortable, but the Cornering by the appearance and the load from the buttocks is much improved.
View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
fall
If I put it on Normal seat, I think it will be a little forward and downward.
My Seat has no problem because I have removed the anchor, so the Seat is like a crescent moon, and the footing is even better.
View detail
ease of use
Very easy to handle. View detail
Style is outstanding, but 、、、、
[How is it used?
The OEM Seat of Z900RS is famous for butt pain Seat, so we replaced it with DOREMI Seat once and the butt pain was solved, but it became a little high seat and the style was too bulky, so we replaced it with Archi Seat without bean paste and with Gel Seat.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The DOREMISeat had some rattling, but the Archi Seat was able to fit snugly.
How was your experience with it?
The texture of the outer skin is good, and the feeling of pressing with the fingers is also very sticky, so I used it with high expectations, but the footing was not improved much compared to OEMSeat, and the cushioning was not so good for the GelSeat included. I didn't get butt pain after about 2 hours test ride, but after a little longer ride, it might be painful. (I did not get butt pain after about 2 hours of test riding, but it would be painful after a longer ride (somewhat better than the OEMSeat).
[Included Parts:were they on?
Seat belt and tacks are optional parts.
I'd like to see it included as standard.
View detail
It's fine without it, but it's not tight enough without it.
[How is it used?
Mounted on Archi's Seat
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult, but since the length is Limit, Bolt tightening while pulling a little.
How was your experience with it?
Without it, Seat's Balance looks bad.
[Included Parts:were they on?
Mounting Bolt only
[Was there anything that disappointed you?
Nothing in particular, but I wish it had been included instead of sold separately.
View detail
The ultimate cafe seat.
The Myoga seat is lower and better looking than another aftermarket low seat I had purchased before. My heels are 2mm from the ground where before it only my toes touched the ground. This seat is also more comfortable on long rides. It was also less expensive than the other seat. Thank you, Webike. View detail
From the eyes ??
I don't care about the texture or design, I bought it because it fits all my books, etc. neatly. I am fully satisfied. View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
Fits: YAMAHA tricity, YAMAHA Tricity 155, YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity 155
It's pretty good!
In my previous motorcycles, when I opened the seat, the handlebar interfered with the seat and tore the seat, so I bought this to reinforce the seat in advance. I was a little worried because of all the comments I had heard about the seat, but when I tried it on, I was able to install it without too much trouble. I like the YAMAHA ?Logo on it, it's fashionable. View detail