Reviews
I am satisfied with the sturdy product.
I am satisfied with the sturdy, stylish design and fast delivery!! Although it was a bit difficult to install, I think it is an excellent product in terms of durability and functionality. We hope to see great products in the future. If you are planning to install a top box on your Suzuki 125, I highly recommend using this product. -------------------------------------------------- -------- I am satisfied with the sturdy, stylish design and fast delivery!! Although it was a bit difficult to install, I think it is an excellent product in terms of durability and functionality. We hope to see great products in the future. If you are planning to install a top box on your Suzuki 125, I highly recommend using this product. Powered by Google Translator View detail
Kitako tank cap decal
Kitako tank cap decal carbon pattern is no joke!! The quality is so good! Kitaco products are cost-effective and the products are great!! I think it will prevent leaks well too!! I really like it!!! Highly recommended!!! It's easy to attach and delivery is very fast!!! -------------------------------------------------- -------- Kitako tank cap decal carbon pattern is no joke!! The quality is so good! Kitaco products are cost-effective and the products are great!! I think it will prevent leaks well too!! I really like it!!! Highly recommended!!! It's easy to attach and delivery is very fast!!! Powered by Google Translator View detail
Custom Factory Noy’s Frontspoiler
Thank you very much for this Frontspoiler. When I ordered I was a little worried about whether the spoiler would even arrive at my home in ( Mannheim ) Germany. Everything worked out great. Many,many thanks to Wbbike.de. Will buy from you again :)...sorry, for my bad english. Many greetings from the cold and rainy germany. See you soon. Bye, bye :) Stefan from Germany View detail
Purchased for pasting Graphic in Race
The OEM exterior is kept for when the vehicle is sold and an external exterior is used.
It is a little thinner than OEM, but I have been riding it every week for more than a year for practice in Race and it is very cost effective.
It went on easily without any gap in the hole position.
(It was common for external exteriors from a long time ago to have holes that did not match.)
It is a very good product because it is Reasonable and can replace the entire exterior.
View detail
Aero Visor
Purchased only for appearance and installed at the lowest position within the adjustable range.
It may or may not be windproof. In other words, we don't know.
I was happy to see that the Visor front end protrusion is now flush with the Chinese Headlight guard I purchased from Amazon.
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY
Good Rear Carrier
Installation was easy, and I am satisfied with the quality and usability.
I was able to install it on a 23 MD47 with no modifications.
View detail
BABYFACERacing hook installation
Installed for use as a loading hook.
Installation can be done by simply removing the Tandem FootpegBracket.
Left Side is to use KIJIMA's Helmet holder.
The Helmet Holder Bracket is inserted under the provided Aluminum Collar, and then the Racing Hook is installed under the Aluminum Collar.
Even so, the HolderBracket and the Racing hookBody still interfere slightly, so the HolderBracket was shaved a little and installed.
In addition, the Left SideMounting Bolt was changed from the supplied 30mm to a 35mm due to the Helmet holder being sandwiched between the two.
View detail
I don't know.
I left it for a while after it arrived and took it out the other day to install it.
Material:The Carbon Style is a little too smooth. It's like the AXIS Lapo quality you buy on Yahoo!
View detail
Very Cool!
Cool!
Installation can be done without modification of holes, etc.
Wonderful!
View detail
I think the texture and windproofing are both quite good
I think the quality is very good. The windproof performance is also good from the helmet down, and the speed is not so high since it is a MONKEY125, but it is quite comfortable for touring at around 60km. View detail
Reliable Carrier
The installation instruction manual is easy to understand, and the quality of the carriers is perfect.
It is strong enough and secure enough.
It is indeed a DAYTONA product.
View detail
Unknown fit, but also on the Right Side.
[How is it used?
I have a Silencer Bracket by YOSHIMURA, and I was thinking of putting a Tie Down Belt through it to tighten it when loading the Transporter.
The Silencer Bracket is probably capable of withstanding the tightening, but in case it gets distorted, I installed the Silencer Bracket on the Right Side, which is not compatible with the Left Side, which is already gold. So, I chose Black so that the color would not be distorted.
Was the installation difficult?
It does not fit on the Right Side, of course, and it is impossible to install it as-is on top of the Silencer Bracket because it interferes with the Silencer Bracket.
Therefore, we measured to open the gap enough to avoid interference, and changed the length of the BoltBolt from the OEM 23mm to 35mm, which had to be lengthened to accommodate the 8mm thick m6 collar and 18mm outer diameter collar length.
How was your experience with it?
The sense of security is still different for tightening with the Tie Down Belt.
Also, although it cannot be helped, it is unfortunate that the Yoshimura logo on the Silencer Bracket is hidden (laugh).
View detail
For installation of Racing hook
In order to install YOSHIMURA's Silencer Bracket and Babyface's Racing hook on top of each other, we had to purchase a bolt of the appropriate length so that the Bracket and Hook could be installed at the same time, since they would interfere with each other and the Tie Down Belt would not fit.
The color was selected to match the Silencer Bracket and Hook because they are black.
After measuring the dimensions of the gap that would not interfere with the Tie Down Belt, we thought an 8mm-thick collar would be appropriate, and when we installed it, the Tie Down Belt could be easily passed through and the protrusion was as small as possible.
We chose the smallest diameter, although we were torn between 18mm and 20mm.
This collar is good because the edge corners are treated so there is no attack on the contacting Parts.
View detail
Compact and GOOD
[How is it used?
STREET
Was the one you received as per Image?
Street Image
Was the installation difficult?
The installation itself was no problem as long as you have the right tools, as the instructions are very detailed.
I think there is a part where it is recommended (required?) to use a screw loosener (Locktiteetc.). I think there is a part where it is recommended to use a screw loosener (Locktiteetc.), so please prepare it separately.
It was more of a hassle to remove OEM and put together Wiring.
How was your experience with it?
I am glad it was as Compact as I expected.
It is not noticeable, but the feeling of cutting of the Gold genus is also textured and self-satisfying.
It has been about 6 months since the installation and it has been working without any Chatter sound or Wobble.
One thing is that the bolt on the blinker part sometimes comes loose, so I wonder if it would be better to have a loosening stop here as well. I was wondering.
[Was there anything that disappointed you?
nothing special
[Overall impression]
This is my first Fender Eliminator and I am satisfied with the high quality despite the low price compared to other products.
This is a RECOMMENDATION for those who like a shape that completely loses its tail.
View detail
KITACO Cap Bolt Cover
The Cap Bolt Cover of the Handlebar Fixing Section of GSX-S was missing.
buy for Replacement
If you don't buy a cap bolt that fits the size of your cap bolt, it won't attach properly, so check when you buy.
I was told it was black chrome, but I think it is a little lighter and closer to silver.
I'm rating it 4 stars because the durability is unknown.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
To make the long haul a little easier.
Would it be easier to have it?
I had never put this kind of thing on before for personal appearance reasons, but I think it would have been easier if I had.
In case of GSX1300R HAYABUSA, I am a little disappointed that there are not many places to touch when I put it on the Limit under the Tank when I do the Knee grip.
It took me quite a while to think that I just had to put it on.
Of course, the more time it takes, the more beautifully it will be applied so that no air will be trapped.
View detail
Installed on YZF/R25/2019
Installation was easy, about 15-20 minutes, and the Tank has a volume output, looks good and is very lightweight. Delivery was also faster than I expected, shipping a few days after purchase. I think I made a good purchase. Thank you very much. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Look Great!
I bought this for a restomod J1 and it really made the bike look alot better once i painted it in black. It was easy to fit and i was happy with the packaging View detail
Good
Nice sticker with thicker layer.medium size. Adhesive also upery bond with srface.dont forget to clean befor past surface. View detail
It is expensive and well made.
At any rate, even an amateur installer was able to install it in about an hour.
It looks like it could have come with the product from the beginning, as it is an exclusive product.
The price is good if you buy it together with the dedicated Plate and Box.
View detail