Reviews
Attachment-like
The sense of Change does not seem to have changed that much.
It is just like AttachmentCustom parts.
View detail
Fits: HONDA CB1000R, HONDA CB1100, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Cb400 handle bar ends
Excellent quality but it needs the proper fittings in the handlebar for it to attach. Make sure you have the right fittings for the handlebars View detail
CBRTe600RRTechnicalSportsRacing fenderless
Tail area is nice and Refreshing.
Unfortunately, Silencer's heat shield is fully visible, so a little modification may be necessary.
I am also a little concerned about the angle of the Number because of the car inspection.
The installation of the system can be done with confidence thanks to a detailed Instruction Manual.
The relocation of the Rubber portion of the Blinker may require a bit of hang.
View detail
GB350CABTON Exhaust System
The design is good, the exhaust sound is moderate, and you will not get tired even if you are touring. View detail
Parenthesis or because I bought it.
I bought this because I had TSR footpeg in and wanted to put Sticker on it as well.
I like Sticker, which has a somewhat retro feel to it!
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
It is easy to install.
I purchased this for TSRCarbon Front Fender.
For OEMBrake hose, drilling is required for the Front Fender without this product.
The installation itself is Quantity:Pair (for Left and Right) The shape of the bracket may be different for each model, but if you read the Instruction Manual, you should be able to install the bracket with little chance of making a mistake.
The time required is about 30 minutes.
The stars are a little bit low ….
Separate tools (hexagonal bar Spanner and Wrench) are required.
Increased periodic retightening work
I think it fits in nicely, but some people may feel it's forced.
And so on.
View detail
It looks nice.
Was the one you received as per Image?
Carbon looks good and gives a tighter look around the Rear.
Was the installation difficult?
The installation of the bolt on the rear suspension side was not difficult because the bolt was installed in four basic locations, but the installation of the bolt on the rear suspension side took time because the location was narrow and the bolt could not be easily accessed, so the bolt had to be inserted by hand.
How was your experience with it?
The look ish to Race ish.
[Included Parts:were they on?
Included Parts:is complete.
[Was there anything that disappointed you?
Tire removal/attachment is a one-cushion hassle since the tire cannot be replaced until it is removed once.
View detail
Fitting is perfect.
I installed it on a 2011 CBR1000RR.
The carbon grain is also beautiful. The cover is larger than the OEM inner fender, so the mud splatter is reduced and the dirt and pebbles on the back of the tail cowl seems to be reduced. The OEM tire size of CBR1000RR is 190/50-17, but I am using it on 200/55-17 without any contact etc. Since the clearance is still almost 1cm, I think it will be durable up to 200/60-17. I think this is a great product that combines both styling and fender performance.
View detail
Fits: HONDA CBR1000RR, HONDA CBR400R, HONDA CBR400X, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650, HONDA VTR250, HONDA CB650R, HONDA CBR500R, HONDA CB500X, HONDA CBR1000RR
TSR TechnicalSportsRACING Timing Hole Cap Sly
[How is it used?
Just replace the Timing wheelCap with a NORMAL Timing wheelCap.
Was the one you received as per Image?
As pictured.
Was the installation difficult?
Tightening Torque is 18N
How was your experience with it?
If it is a stick before you fall, or even if it is just a standing chipping, you may be able to protect yourself with Engine Cover.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Torque wrench is a must. Well, I think it is no problem even if it is just a feeling in the hand.
View detail
Reverse side butchering
Reverse side was well butchered and satisfactory.
CrabHook is easier to use because it is easier to hang the Rear stand.
View detail
Excellent
The product finish is great and appears to function well enough. The texture is good and it feels a little softer when shifting gears. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR
Just Parenthesis good
I don't know about the effect because I usually drive only on public roads, but I just love the Parenthesis. View detail
I like TSR's products very much.
I've purchased the TSR Carbon rear fender twice now.
I'm sorry. Why don't you come to the middle?
View detail
I like it very much
Was the one you received as per Image?
It was just like the image!
Was the installation difficult?
Installation was not difficult if you look at the Instruction Manual.
How was your experience with it?
Before I installed it, it would go right into N, but after I installed it, it's much easier to get into 1st & rarr; 2nd gear!
[Included Parts:were they on?
It came with an attached Bolt.
[Was there anything that disappointed you?
It was everything I hoped it would be!
View detail
Well-built TSR classic Tear Sets
Is it CBR, or is it the standard TSRRear Sets for Honda?
I've been using it for some time now with the Touch as a Snap.
Although it was lighter than NORMAL in the older models, it is slightly heavier as for the SC82 because the Manufacturer worked hard to reduce the weight. I made the same level of weight with Titaniumium Bolts.
The one I installed was Gold, and at this point only three early lots in the world!
Large I'm satisfied with it, but the drawback is that it's expensive, and only this one is 10,000 yen more expensive...
View detail
Solve the problem of dirt around the rear.
important item
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? I'd like to see reverse side processing added for a separate fee of Gold.
[Do you have any products to compare it to? HONDAOEMCarbonRearHugger
Frequently Asked Items
What made you decide to buy? Dirt around the wheels, especially after driving on wet surfaces
How was your experience with it? I've got my worries out of the way.
Was the installation difficult? No, I'm just a little concerned that the mounting bolts and clips are different from the OEM shape. So far, no problems.
【Please tell me the installation point and hang】 The mounting surface is a little different from the original RearHugger, so it's best to wash it once it's removed.
[Was the Instruction Manual easy to understand? Yes
[Included Parts:were they on? Yes
[Others]
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
The vtec switchover...
I've had this exhaust system on for 3 months now and the quality & middot; looks great.
The material of the exhaust pipe is Titanium, but it was not slippery, but textured.
As far as the sound is concerned, I think it's very bass-driven.
As for the vtec switchover, I didn't know much about it, almost none.
I think it can't be helped because Silencer is long.
I have a different Slip-on Silencer installed now.
I was mistaken and bought the Silencer hanger, which is sold separately, but I don't think you need to buy it because it actually comes with an unburned one.
I have no idea about the performance as I am a layman.
The price is so high that it's hard to get your hands on one, but I think the best thing about motorcycles is the way they look, so if you want to improve your parenthesis, why not buy one and install it?
All Full Exhaust Systems are the same when it comes to installation, but the middle quantity:The 2pc is not easy to tighten, so I think you can prepare an extension bar and universal joint and install them.
View detail
Fits: HONDA CB1100, HONDA RVF750, HONDA VTR1000SP, HONDA VTR1000SP, HONDA X4, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA VTR1000FVTR1000F FIRESTORM
I was expecting a little too much.
When I get stuck in traffic jams, the Clutch operation becomes difficult. I thought about changing the Clutch master to see if it could be a little lighter, but then, balance-wise, do I have to change the Brake master as well? put on airs 。 I have purchased this product because it is impossible to buy it due to the capital gold requirement. 。 In order to give a custom feeling, I chose gold, but as a result, it is hidden in the cover and nothing can be seen.
Installation is also easy with the included parts:it's not difficult to install. It's not difficult to install and the Instruction Manual is included for your peace of mind.
As for the efficacy, it was lighter, but not as much as I expected, but definitely lighter than NORMAL.
View detail
There's a lot of information I haven't written about
This product requires additional parts to be used for Reverse Shift
And the sprocket cover needs to be processed separately when making Reverse Shift It is
If you want to use the Quick shifter with it, you will need additional parts
I wish this information had been included in the product description
The footpegs are a bit too indulgent to be TSR-like or Race shop-like It's a solid feeling of rigidity, and it's a bit like a race car It is a style that is only a style of the company B and M I think that the parenthesis of the shape is inferior to Company B and Company M
The installation is almost fully assembled and packed, see the Construction Manual It is relatively easy to install while
I think that the Frame and RODClearance are just barely made and
I thought there could be a few more gaps
As for the brake pedals, they don't come with springs, and the OEM Brake It consists only of Spring, which connects the switch to Pedal, and is less resilient
I wanted a little more information in advance before I bought it, since I chose it with Reverse Shift in mind I thought
View detail
Fits: HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Calm bass
It sounded exactly as I saw it in the social media video
It's a pleasant bass sound without being loud
I'm glad I bought it The fixed holder was a little loose, so I give it 3 stars for installation I wrapped a 3mm thick rubber sheet around half of it and it just fit
View detail