Reviews
TSRSports Clean
cbr600rr (2bl-pc40) Used for
Every time I change Motorcycle, I change Screen, but usually it is a certain foreign product. [Color] I used to use Smoke, but this time I decided to go with TSR on the recommendation of a friend! Moreover... [Color] Clear! At first I was only worried, but when I put it on and looked through the Screen, it was amazing! [Color] It's great to see it in Clear!
Also, parts to attach to Screen (Guard?) I was happy and impressed that WW is just the right length to use without having to cut the
I think the Body is well made!
View detail
Attached because it's cool.
I didn't put QuickSystem on it, nor do I Race it, but I put it on because it's cool and it's also a functional Part.
Neck the Drill and Nutter required for the work is expensive even though they are not usually used, but we found a tool that can be implemented cheaply.
Hand drill about 2,800 yen, A little nutter about 1,000 yen, 7.1mmDrill about 900 yen.
I was reluctant to drill a hole in the Swing Arm, but I took the plunge and did it, and since it is an aluminum Swing Arm, the hole opened easily.
The nut is also fixed with 2-component Epoxy when crimping because it would be disastrous if the nut spins out of place.
When crimping, care should be taken not to raise the screw threads since the aluminum nut is M5 and small in diameter.
The part where the chain hangs is chamfered and has a good texture, but the price is Neck.
View detail
Windproof performance Up
As shown in the Title, the height has been increased compared to the OEMScreen, and the windproof performance has clearly improved.
[Color] I think the Smoke color makes the Parenthesis look tighter and more attractive. The visibility is not a problem during the daytime, but when driving at high speeds at night, please be careful of the visibility through the screen.
Installation is very easy as all you have to do is remove the OEM Bolt and secure it with the included push rivet.
View detail
Fast and effective Large
I bought it for dress-up purposes and did not expect the wind regulating effect.
I drove about 150 km on the highway the day after installation and felt almost no wind roll in at the speed limit.
The wind control effect is surprisingly good even on the 120km section of the Tomei Expressway.
(When the height of the Scooleyn is set to the Largeest)
What I'm concerned about [Color] The Smoke is so thick that it is difficult to see the road surface when driving at night if the Screen height is raised.
I chose it for its looks, so I will run with that in mind.
View detail
CBRTe600RRTechnicalSportsRacing fenderless
Tail area is nice and Refreshing.
Unfortunately, Silencer's heat shield is fully visible, so a little modification may be necessary.
I am also a little concerned about the angle of the Number because of the car inspection.
The installation of the system can be done with confidence thanks to a detailed Instruction Manual.
The relocation of the Rubber portion of the Blinker may require a bit of hang.
View detail
The price is high, but worth it.
[How is it used?
It is installed on a 2020 CBR1000RR-R.
Was the one you received as per Image?
It is exactly as shown in the Image. There is no strange distortion, and the woven part of Carbon (?) is also very nicely done.
The price is quite a good price, but the quality is commensurate with the price.
Was the installation difficult?
It was not difficult but slightly cumbersome.
The OEM also has something like a very short Rear Fender, but it is fixed to the inside of the Swing Arm with a Bolt. It is a little troublesome to replace it because of its poor location and inaccessibility.
How was your experience with it?
It's a big difference without it. It is very sporty.
We don't run in the rain, so it is unclear if it is effective in bouncing in the rain.
[Included Parts:were they on?
It is not diverted from the OEM Bolt or anything like that, but comes with it securely.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
poor in cost performance
The screen itself is cheap, thin and small compared to OEM products.
Also, like MRA, the Rubber stop that covers the Screen tip is not attached neatly because it is fastened with adhesive.
View detail
The claw on the tip broke off during installation.
The claws on the tip of the device are broken as shown in the picture, even though all you have to do is to finger-load the 3 claws and attach 4 screws on the tip. The reason why I asked for the spec. is because I applied for a return request as a defective product, but received no response and asked me to write an imprementation. I am disappointed that I got the worst product. View detail
Parenthesis or because I bought it.
I bought this because I had TSR footpeg in and wanted to put Sticker on it as well.
I like Sticker, which has a somewhat retro feel to it!
View detail
real carbon
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install more light and real carbon View detail
nice carbon
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install more light and is real carbon View detail
As expected of TSR's Parts.
The screen is well made, and the increased height compared to the OEM screen makes a clear difference in aerodynamic drag when touring. View detail
It is an effective Rear Fender.
The fitting is good, and the length is longer than OEM, making it a good part for reducing jumping rocks and splash up. View detail
It looks nice.
Was the one you received as per Image?
Carbon looks good and gives a tighter look around the Rear.
Was the installation difficult?
The installation of the bolt on the rear suspension side was not difficult because the bolt was installed in four basic locations, but the installation of the bolt on the rear suspension side took time because the location was narrow and the bolt could not be easily accessed, so the bolt had to be inserted by hand.
How was your experience with it?
The look ish to Race ish.
[Included Parts:were they on?
Included Parts:is complete.
[Was there anything that disappointed you?
Tire removal/attachment is a one-cushion hassle since the tire cannot be replaced until it is removed once.
View detail
Fitting is perfect.
I installed it on a 2011 CBR1000RR.
The carbon grain is also beautiful. The cover is larger than the OEM inner fender, so the mud splatter is reduced and the dirt and pebbles on the back of the tail cowl seems to be reduced. The OEM tire size of CBR1000RR is 190/50-17, but I am using it on 200/55-17 without any contact etc. Since the clearance is still almost 1cm, I think it will be durable up to 200/60-17. I think this is a great product that combines both styling and fender performance.
View detail
Impression
Installation is easy with tools. View detail
First Custom
This is the first MotorcycleCustom product I have made with my own hands. I am very satisfied with the product, it comes with instruction manual and I was able to install it properly and my motorcycle looks much cooler now! I am very satisfied with the product. View detail
Simple and Rear is clean!
[How is it used?
I wanted to make the Rear area Simple.
Was the one you received as per Image?
Japanese Vehicle Inspection Correspondence angle, I would say.
Was the installation difficult?
Installation of OEMBlinker was a struggle
How was your experience with it?
Small monk-like feeling
[Included Parts:were they on?
Included as described in the product description
[Was there anything that disappointed you?
I thought it could have been a little more angular.
Other items that would be helpful
The instruction manual is included, so it is easy to understand, but it is relatively easy to install the OEMBlinker, although the rubber packing is hard.
View detail
I like TSR's products very much.
I've purchased the TSR Carbon rear fender twice now.
I'm sorry. Why don't you come to the middle?
View detail
luxury lid
I had to wait about a month from order to delivery, but it was worth the wait. The texture of the product was good and the fit was Exactly. The instruction manual says to use gum tape to cure the cap and then tap it with a plastic hammer to install it, but in reality, I applied a lot of medium viscosity silicon grease to the cap's O-ring and pressed it with my finger forcefully, and it went in easily.
The Red bone and Black Contrast is COOL!
View detail