Reviews
Not too conspicuous.
Buy Black Plating.
The body of the car is Color:Gray, so the subdued Black Plating is a nice touch.
I am satisfied with Large because it is easy to install and ExactlyFit and does not wobble.
View detail
Fits: KAWASAKI Ninja 1000SX
Black is calm and Parenthesis is nice.
IKAZUCHIBlack was installed on a Ninja 1000SX. Since it is a government approved product, there is no problem with vehicle inspection. As for the sound, it is still quiet because of the lunch box. Since I am not young in age, this is just right. Also, I am concerned about the scratches on the Black Exhaust System, they are very noticeable. Be careful! View detail
Pricey, but the stuff is good.
[How is it used?
Fits ZX-6R 2023
Used for chain adjustment and wheel removal/attachment.
Was the one you received as per Image?
It arrived in beautiful condition with no scratches.
Was the installation difficult?
It is easy to install with Bolt1 pc.
It is necessary to have a certain sense of the material, since the stipulated Torque is not explained in particular, but Material:Since it is a DURACON Slider, even if it becomes Overtorque, the resin part will be crushed, so you may not have to be so nervous.
How was your experience with it?
The common Anodized Treatment Stand Hooks are noticeably scratched and scraped when used, so even if it is not a problem in practical use, it is bothersome.:I chose DURACON, and even with DURACON, scratches will appear, but they will not be like peeling paint, so they are somewhat less noticeable.
The fact that it also doubles as a Swing Arm Slider was another point that led us to purchase it.
Material on all SS such as ZX-6R.:AluminumSwing Arm is vulnerable to strong impacts and is expensive, so we chose Stand Hook, which offers the best protection possible.
[Was there anything that disappointed you?
It's a little pricey, and I wish it were cheaper since it's UniversalParts, but the thing is well made.
[Good to have].
BoltMarker, Screw lock agent
It depends on how often you use the Stand Hook and how often you ride your motorcycle, but I think it would be safer to have a stand hook because it is also a place where loads are applied.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
I bought it on the recommendation of someone around me.
Sound is my favorite.
I also like the design of the Parenthesis and the fact that it can be selected to match the Motorcycle.
View detail
I like the design.
It is also good that there are many size and color variations to choose from.
I don't know how durable it is in terms of fading etc., but I would be happy to buy it again at that time.
View detail
Lever Guard
Not that it's meant to be used for Race, etc., but it does look good!
I haven't run the car yet, so I'll have to wait until I run it to see how the vibration will be while running, since it's a replacement from a heavy weight Bar End.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Good looking and easy to install.
Cowl does not need to be removed to work!
*Extreme care must be taken not to bump it. At your own risk!
Looks great! No distortion etc.!
It is difficult to evaluate because it is a "can't fall down" kind of Parts.
I guess my only concern is the high … price.
It would have been … nice … if it was at least in the low 10,000s ….
I'm not sure if it's OEM or not, or if it's an unspoken price collusion thing, since the prices of Large Brand's products are all the same.
View detail
Does it look good?
The sound is quieter than OEM, but I don't have to worry about warmth in a residential area, and I'm hoping the Stainless Steel will keep it from rusting. The look is great in my opinion. View detail
Ikazuchi Short Tube equipment
Design is good but sound is too quiet. Sound is OEMExhaust System at its best! View detail
TricksterPowerIntakeDuct
After the change, I can hear the intake sound better than OEM, and I doubt the power increase is enough to be noticeable, but the intake sound is pleasant, so I'm happy!
It's hard to see Custom, but I'm glad we did it!
View detail
Fits: HONDA CBR250RR(2017-)
TricksterShotgun
TricksterParenthesis is still good. I had to wait for a long time for delivery. This time I ordered the Titaniumium silencer. I think the sound is also good. The only thing is that the price is a little high …. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Ikazuchi Exhaust System
Feels like the bass is not as good as I thought it would be.
I'll get on it soon and see how it goes.
View detail
It is a good Material that does not slip
I am on a 2015 Initial ModelH2.
The hanging angle of the Handlebar and the tightness of the Axel were causing strain on my wrists, but I thought that my body slipping too much on the Seat and clinging to the Handlebar might also be a cause of fatigue.
The material is embossed, and it provides a good grip.
View detail
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R
Note the size of the heel plate.
I have used Babyface and YOSHIMURA's Rear Sets, but I could feel the difference in design concept.
The exterior has a semi-luster finish with a thicker coating film and a smooth surface, giving it a luxurious feel, and unlike Anodized, it has a less gold-like appearance.
The cutting of footpeg is not deficient because of the roughness of the eye, but the Grip feeling is modest compared to the former.
The stiffness is quite high, the former had some bending, but this one is firm. I think this level of stiffness is good for a large type SS.
The structure of the seat is such that the plates of each part are flush with each other, so it feels good on the feet. The bolt is also flat because the seat surface is gouged out and driven inward, so the contact surface is flat.
The Pedal is outside of the Plate, so if you have your foot firmly on the Pedal, you will be stepping on the entire Pedal.
While the former structure was designed to change the distance between the front and back at the tip of the pedal, this one is arranged to adjust the height, which can be adjusted without tinkering with the Linkage or Master Cylinder, but the range of adjustment to the LargeSmall foot is small.
Rear brake return spring is included, with a larger diameter wire than the OEM for a firmer feel.
The heel plate is too small. When you put your foot on the footpeg, the back edge is about heel level, but when you input your toe, the heel does not stick.
The instruction manual is rich in illustrations and easy to understand about installation. The packaging is good because it is in assembled condition, so it is easy to understand the Bolt installation position.
Torque should be mentioned in the service manual instructions, if you know about it anyway.
After completion, the instructions for tightening the screws were given, but since the screw lock was painted and tightened in some parts and some parts were temporarily assembled, we had to untighten the temporary assembly and retighten it, which took a lot of time and effort.
View detail
Sounds even better than I imagined!
I was surprised that the sound was larger than I had imagined, but it is a very good sound.
If volume is a concern, it is recommended that End Baffle be attached.
View detail
The change from MORIWAKI has made it easier to ride.
We used to use MORIWAKI muffler + MORIWAKI exhaust pipe, but the silencer was damaged by standing fire, so we replaced it with this silencer.
I was not dissatisfied with MORIWAKI, but I preferred the design of MORIWAKI, so I am satisfied with the style after the exchange.
I feel that the Torque has been increased and the starting feeling is smoother than the MORIWAKI Silencer with the MORIWAKI Exhaust Pipe. (This is just a layman's opinion.)
The only complaint I have is that the Silencer end was slightly dented when I received it. (This is the second and third photo)
I noticed it after I put it on, so I gave up on the idea that I could not return it, but there was nothing wrong with the outer box, and the stainless steel is quite hard, so I don't think it was dented during shipping.
That was my only disappointment since it's a pretty Gold amount.
The Others are satisfied.
View detail
Wide view mirror
I cracked the RightMirror with a slight contact and thought I might have to replace the Mirror, but only the Wide view mirror was cracked, so I had to order a replacement. It took about 10 minutes. There is a bulge in the middle, so I had to be creative while attaching it. The details are described in the Instruction Manual included in the package. The thickness is a little thicker since it is attached to the mirror, but the visible area is wider. The wide angle makes it seem a little farther away than the OEM Product. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
Sound is just thunder (IKAZUCHI) !
[How is it used?
I installed it on a 2021 Ninja 400.
I purchased this product not for the purpose of performance improvement, but to personalize the exhaust sound and appearance.
Was the one you received as per Image?
The exterior was as shown in the Image.
However, I was surprised when I held it, the lightness is more than Image!
Was the installation difficult?
This was my first time replacing the Exhaust System, but there was nothing in particular that troubled me.
Although Manufacturer recommended that we have it installed at a store, I think anyone can do the work if they read the Instruction Manual carefully.
How was your experience with it?
Sound at Idling is the best!
Of course it feels great when you blow it up, but it feels even better when waiting at traffic lights or driving at low speeds because of the heavy bass sound!
BlackTitanium is also a mat color, giving it a subdued appearance.
We like the sound, but we are more satisfied with the cool look of the product.
[Included Parts:were they on?
There is nothing else to buy besides what is included in the package.
The only thing I would say is tools.
[Was there anything that disappointed you?
I have not found anything disappointing or unsatisfactory so far.
Overall, I am satisfied with the Large change!
If I ever switch Motorcycles, I would buy these Items again!
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400
It is well made.
We used the same footpeg before, so we decided to go with Trickster again.
A color Instruction Manual is also included, and the footpeg is temporarily assembled for easy installation.
View detail
I guess it's better than not putting it on.
I had not intended to put it on because I thought it would increase air resistance, but I put it on because it often gets dirty.
It went on easily without processing. I don't know how durable it is. If you have some skill, you can easily install it, but if you don't, you will have to remove all the surrounding parts. The only thing is that it is a bit pricey. ・・・・
View detail